A wait state is a delay experienced by a computer processor when accessing external memory or another device that is slow to respond.

Computer microprocessors generally run much faster than the computer's other subsystems, which hold the data the CPU reads and writes. Even memory, the fastest of these, cannot supply data as fast as the CPU could process it. In an example from 2011, typical PC processors like the Intel Core 2 and the AMD Athlon 64 X2 run with a clock of several GHz, which means that one clock cycle is less than 1 nanosecond (typically about 0.3 ns to 0.5 ns on modern desktop CPUs), while main memory has a latency of about 15–30 ns. Some second-level CPU caches run slower than the processor core.

When the processor needs to access external memory, it starts placing the address of the requested information on the address bus. It then must wait for the answer, that may come back tens if not hundreds of cycles later. Each of the cycles spent waiting is called a wait state.

Wait states are a pure waste of a processor's performance. Modern designs try to eliminate or hide them using a variety of techniques: CPU caches, instruction pipelines, instruction prefetch, branch prediction, simultaneous multithreading and others. No single technique is 100% successful, but together can significantly reduce the problem.

Energy conservation

Wait states can be used to reduce the energy consumption of a processor, by allowing the main processor clock to either slow down or temporarily pause during the wait state if the CPU has no other work to do. Rather than spinning uselessly in a tight loop waiting for data, sporadically reducing the clock speed in this manner helps to keep the processor core cool and to extend battery life in portable computing devices.

Alternative meaning on IBM mainframes

On IBM mainframes, the term wait state is used with a different meaning. A wait state refers to a CPU being halted, possibly due to some kind of serious error condition (such as an unrecoverable error during operating system to IPL). A wait state is indicated by bit 14 of the PSW being set to 1, with other bits of the PSW providing a wait state code giving a reason for the wait. In z/Architecture mode, the wait state code is found in bits 116-127.[1]

See also

References

  1. "IBM Knowledge Center". www.ibm.com. 9 December 2016. Retrieved 14 April 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.