The Szyszkowski Equation[1] has been used by Meissner and Michaels[2] to describe the decrease in surface tension of aqueous solutions of carboxylic acids, alcohols and esters at varying mole fractions. It describes the exponential decrease of the surface tension at low concentrations reasonably but should be used only at concentrations below 1 mole%.[3]

Equation

with:

  • σm is surface tension of the mixture
  • σw is surface tension of pure water
  • a is component specific constant (see table below)
  • x is mole fraction of the solvated component

The equation can be rearranged to be explicit in a:

This allows the direct calculation of that component specific parameter a from experimental data.

The equation can also be written as:

with:

  • γ is surface tension of the mixture
  • γ0 is surface tension of pure water
  • R is ideal gas constant 8.31 J/(mol*K)
  • T is temperature in K
  • ω is cross-sectional area of the surfactant molecules at the surface

The surface tension of pure water is dependent on temperature. At room temperature (298 K), it is equal to 71.97 mN/m [4]

Parameters

Meissner and Michaels published the following a constants:

Szyszkowski Equation Constants
Compounda.104Compounda.104
Propionic acid26n-Propyl alcohol26
Isopropyl alcohol26Methyl acetate26
n-Propyl amine19Methyl ethyl ketone19
n-Butyric acid7Isobutyric acid7
n-Butyl alcohol7Isobutyl alcohol7
Propyl formate8.5Ethyl acetate8.5
Methyl propionate8.5Diethyl ketone8.5
Ethyl propionate3.1Propyl acetate3.1
n-Valeric acid1.7Isovaleric acid1.7
n-Amyl alcohol1.7Isoamyl alcohol1.7
Propyl propionate1.0n-Caproic acid0.75
n-Heptanoic acid0.17n-Octanoic acid0.034
n-Decanoic acid0.0025

Example

The following table and diagram show experimentally determined surface tensions in the mixture of water and propionic acid.

Surface Tension of Propionic Acid solved in Water[5]
xAcid [mol/mol]xWater [mol/mol]σ [mN/m]T [K]a.104
1(Pure Acid)026.68293.15298.
0.182290.8177133.08293.1590.7
0.171020.8289833.15293.1585.6
0.14940.850633.54293.1577.2
0.128030.8719734.18293.1569.7
0.109470.8905334.56293.1561.4
0.08690.913135.3293.1551.8
0.07470.925335.77293.1546.3
0.066020.9339836.43293.1543.2
0.054360.9456438.51293.1542.2
0.04550.954540.07293.1540.3
0.032680.9673242.34293.1535.1
0.020750.9792546.78293.1532.8
0.014570.9854350.17293.1531.4
0.008610.9913953.61293.1525.9
01(Pure Water)72.58293.15
   Mixture surface tension of the aqueous solution of propionic acid

This example shows a good agreement between the published value a=2.6*10−3 and the calculated value a=2.59*10−3 at the smallest given mole fraction of 0.00861 but at higher concentrations of propionic acid the value of an increases considerably, showing deviations from the predicted value.

See also

References

  1. B. von Szyszkowski, Z. physik. Chemie, 64, 385 (1908)
  2. H.P. Meissner, A.S. Michaels, Surface Tension s of Pure Liquids and Liquid Mixtures", Ind. Eng. Chem., 41(12), 2782, (1949)
  3. Bruce E. Poling, John M. Prausnitz, John P. O’Connell, The Properties of Gases and Liquids, 5th Edition
  4. NIST Chemistry WebBook http://webbook.nist.gov/chemistry/
  5. Suarez F., Romero C.M., J.Chem.Eng.Data, 56(5), 1778-1786, 2011
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.