D&RGW 169
No. 169
Cole Park in Alamosa, Colorado.
Type and origin
Reference [1]
Power typeSteam
BuilderBaldwin Locomotive Works
Serial number7028
Build date1883
Specifications
Configuration:
  Whyte4-6-0
  UIC2′C n2
Gauge3 ft (914 mm)
Driver dia.46 in (1,168 mm)
Adhesive weight50,643 lb (23.0 t)
Loco weight70,550 lb (32.0 t)
Fuel typeCoal
CylindersTwo
Cylinder size14 in × 20 in (356 mm × 508 mm)
Performance figures
Tractive effortc. 12,000 lbf (53.38 kN)
Career
OperatorsD&RG » D&RGW
ClassD&RG: 47,
DRGW: T-12
NumbersD&RGW: 169
Last run1938
Retired1941
Current ownerThe City of Alamosa
DispositionOn Static Display
Denver and Rio Grande Railroad Locomotive No.169
Rio Grande 169 is located in Colorado
Rio Grande 169
Rio Grande 169 is located in the United States
Rio Grande 169
LocationAlong Chamber Dr. within Cole Park, Alamosa, Colorado
Coordinates37°28′10.6″N 105°51′43.1″W / 37.469611°N 105.861972°W / 37.469611; -105.861972
Arealess than one acre
Built1883
ArchitectBaldwin Locomotive Works
Architectural styleNarrow gauge steam locomotive
NRHP reference No.01000230[2]
CSRHP No.5AL.312.1
Added to NRHPMarch 12, 2001

Denver and Rio Grande Western No. 169 is a 4-6-0 "Ten Wheeler" type narrow gauge steam railway locomotive. It is one of twelve similar locomotives built for the Denver and Rio Grande Railroad by Baldwin Locomotive Works in 1883. It was built as a passenger locomotive, with 46 in (1,200 mm) drivers, the second largest drivers used on any three foot gauge D&RGW locomotive. (The K-37s have 44 in (1,100 mm) drivers.)[1]

During its operational life it was used on all of the major D&RGW narrow gauge lines. It appears in two Otto Perry photographs on the branch to Santa Fe, New Mexico in April 1933.[3] It was taken out of service in 1938 and then refurbished in 1939 to appear at the 1939 New York World's Fair. In 1941, the railroad donated it to the City of Alamosa and it has been in Cole Park there since.[4] It was added to the National Register of Historic Places as Denver and Rio Grande Railroad Locomotive No.169 in 2001.[2]

Denver & Rio Grande RR 169 in its later years of service (Friends of the Cumbres & Toltec Scenic RR collection).
Denver & Rio Grande #167, at Alamosa, Colorado, not long after the railroad received it from Baldwin Locomotive Works in 1883. This engine was a sister to D&RG 169. The photo shows what #169 looked like originally, with diamond stack, box headlight and a wooden pilot (cowcatcher). (Colorado RR Museum collection)

See also

References

  1. 1 2 Official Roster No. 11 of the Denver and Rio Grande Western Railroad System. Denver: The Denver and Rio Grande Western Railroad System. April 1, 1923.
  2. 1 2 "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  3. Perry, Otto. "D&RGW #169 (photograph)". Photos West. Retrieved 4 February 2010.
  4. "The History of Engine 169 And Railroading in Alamosa, Colorado". Museum Trail.org. Retrieved 27 January 2010.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.