Psion Revo
A Psion Revo with the Time application open
DeveloperPsion Teklogix
ManufacturerPsion Teklogix
TypePDA
Generation4
Release dateNovember 1999 (1999-11)
Lifespan1999–2003
Operating systemSymbian Release 5 (formally EPOC32)
CPUARM 710T
Display480 × 160 monochrome LCD, 13.1 cm (5.2 in)
InputQWERTY keyboard
Resistive touchscreen
Infrared port
CameraN/A
TouchpadN/A
ConnectivitySerial, 19,200 bit/s RS-232, 115200 (max) baud rate
Power2 × internal 700mAh rechargeable Ni-MH AAA batteries
Dimensions157 mm × 79 mm × 17 mm (6.18 in × 3.11 in × 0.67 in)
Mass200 grams (7.1 oz)
PredecessorPsion Series 3
RelatedDiamond Mako
LanguageOpen Programming Language

The Psion Revo, launched in November 1999, is a personal digital assistant (PDA) from Psion. It is the successor to the Psion Series 3 and a light version of Psion Series 5mx. It is software-compatible with the 5mx and has the same processor but is more lightweight (200 grams (7.1 oz) vs 354 grams (12.5 oz) of 5mx) and substantially smaller (157 by 79 by 17 millimetres (6.18 in × 3.11 in × 0.67 in)). Relative to the Series 5 and 5mx, the Revo has a smaller screen (480 × 160 vs 640 × 240 of Series 5–5mx), and lacks a flash-card slot and backlight.

The Revo comes in two variants, Psion Revo and Psion Revo Plus, having 8 and 16 MB of random-access memory (RAM) respectively. It is powered by a 36 MHz ARM architecture 710T microprocessor, and a larger battery for the Plus model. Among other things, the hardware is equipped with a short-range Infrared Data Association (IrDA) wireless infrared communication system and a touchscreen. Like its bigger counterpart Series 5mx, it comes with a small suite of office and communications programs built into the ROM chips. Other programs are user-installable by using a docking station to send Revo programs from a desktop computer.

SONICblue Incorporated produced a version of the Psion Revo Plus renamed to Diamond Mako, which they distributed in the United States and Canada.

Along with Enfour, Psion made two versions of the Revo for the Chinese market named the 618C (Traditional Chinese characters) and 618S (Simplified Chinese characters).[1]

OpenPsion

Open-source software projects were begun to port Linux to the Psion Revo and other Psion PDAs, including OpenPsion, formerly PsiLinux,[2][3] and Revol, an optimized version of OpenPsion for the Revo.[4]

Conan

Shortly before the demise of Psion in the commercial PDA market, work was near completion on a successor to the Revo, a 3rd-generation PDA with the codename Conan.[5] The Conan ran EPOC Release 6 and was to feature support for Bluetooth and a backlight, although the former did not function in the development builds.[6]

Battery

The Revo was notorious for battery and charging problems.[7] Unlike the Series 5mx, which used 2 user-replaceable AA batteries, the Revo is powered by 2 built-in rechargeable AAA 700 mAh nickel–metal hydride battery (NiMH) batteries. After backing up all data, the batteries can be accessed by closing the unit, gently prying off the logo plate (using heat and a watchmaker's knife or a similar tool), moving the 2 small pins that are behind it, and carefully opening the clam shell (silver part) of the casing, removing a third pin from the left hinge and very carefully lifting the part away unclipping it and sliding it to the right and off of the right hinge's fixed pin. The batteries are wrapped in black tape, which can be removed starting from the left, taking care not to break the thermistor that it also encloses. The positive and negative wires can be desoldered from their tabs, minding the iron tip does not make contact with the cell (don't cut the wires). Replacement batteries must be taped in just as securely and put a dab of glue over the socket, as Revos suffer from batteries coming loose and unplugging (fixed in the Plus model). After replacing (and after a hard reset), the unit must be charged uninterrupted from 0-100%, which is 6 hours for stock battery capacity (preferably with the unit turned off), so that the hardware can recalibrate, as per instructions for a new unit. Due to the way the charging circuit works, it is not recommended you use anything other than Ni-MH cells. If you replace with higher capacity, you will need to work out how much longer the device needs charging for. Ignore the battery meter on first charge. The (red) charging light turns off around 84%.

It is not recommended to put either Revo models on charge when their battery is over 80% due to a sense in thermal change required around this level. Missing this thermal change can and does lead to overchargeing.

References

  1. ↑ "Symbian: Community news 2001: Psion localizes Symbian OS for China, Taiwan, Hong Kong". 6 February 2005. Archived from the original on 6 February 2005. Retrieved 10 March 2022.
  2. ↑ Morley, Jason Barie (17 May 2006). "OpenPsion formerly PsiLinux: Welcome to Linux on Psion Handhelds!". SourceForge. Retrieved 11 February 2022.
  3. ↑ Morley, Jason Barie (17 May 2006). "OpenPsion formerly PsiLinux: Welcome to Linux on Psion Handhelds!". OpenPsion.org. Archived from the original on 28 September 2011. Retrieved 11 February 2022.
  4. ↑ Howard, Simon (1 December 2001). "Revol". SourceForge. Retrieved 11 February 2022.
  5. ↑ "Gizmodo UK: Psion Revo prototype up for grabs". 8 August 2006. Archived from the original on 24 February 2007. Retrieved 10 January 2018.
  6. ↑ A photo report of the Psion Conan.
  7. ↑ Geek, Jan. 2, 2001. "Psion’s Revo battery trouble 'official'" http://www.geek.com/mobile/psions-revo-battery-trouble-official-542748
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.