intendiX is a commercial brain-computer interface (BCI) environment. It is a personal BCI that anyone can use without technical training or outside support at home or in a hospital. Users can control any smart home device such as a television, music player, air conditioner and light. intendiX can control other devices as well, such as mobile robots or games.

intendiX was introduced in 2009 by Guger Technologies OG.

While intendiX has been used as an assistive technology by persons with severe disabilities, performance may be worse among users with disabilities due to fatigue, visual deficits, or impaired concentration, attention, or memory. Most people can use intendiX to spell five to ten characters per minute within about ten minutes of training.

Description

intendiX can rely on P300 waves p and SSVEP. Both of these are very well established paradigms in BCI research,[1][2] Research articles have shown that nearly all people with a healthy visual system can use these types of BCIs. Both of these approaches require the user to pay attention to a specific region of the monitor.

In a P300 BCI, different items on the monitor (such as letters) flash while the user is instructed to silently count each time a target item flashes. The BCI can identify the target item by determining which flashes elicited brain signals reflecting attention to that item. One of the most distinct such signals is the P300, hence the name. BCIs that rely on steady state visual evoked potentials (SSVEPs) instead rely on items that flicker instead of flash. The user focuses on one of the flickering items, producing SSVEP activity at the same frequency as that item. SSVEP signals are often found at harmonics of the stimulation frequency as well, which most SSVEP BCIs (including intendiX) exploit to improve performance. Therefore, a BCI can determine the target item by identifying the peak frequencies in the user's visual areas, which can only correspond to one of the many items on the monitor.

intendiX components

The intendiX system requires four components:

  • sensors that detect brain activity;
  • signal processing algorithms that identify relevant brain signals in real time;
  • a device or application where the output signal is sent; and an
  • operating environment that connects these components to each other and mediate interaction with the user. (Wolpaw et al., 2002;[3] Allison et al., 2007,[4] 2012; Wolpaw and Wolpaw, 2012[5]).

Sensors: The first intendiX system, released in 2009, allowed users to work with either passive or active electrodes. While both of these electrodes require electrode gel, like conventional electrodes, the active electrodes do not require skin preparation and are more robust to external noise. This is because active electrodes feature amplifiers and other electronics within each electrode, whereas passive electrodes first send brain signals along cables before amplification. In 2010, g.tec introduced the Sahara dry electrode, which does not require gel.

Signal processing: In typical BCIs, signal processing often involves different stages. For example, spatial filtering algorithms will determine how to best utilize information from the different electrodes, and pattern classification may categorize the resulting data. The intendiX system uses different signal processing algorithms for different types of brain signals.

With P300 signals, intendiX relies on stepwise linear discriminant analysis (SWLDA), The more general approach, LDA, is used in other types of BCIs as well.[6] With SSVEP activity, intendiX instead relies on bandpower at different frequencies. A simple SSVEP BCI might present two stimuli on a monitor; the left stimulus oscillates at 8 Hz and the right at 13 Hz. If the user's visual areas show an increase at 8 Hz and its harmonics, a signal processing algorithm can identify this spike and thus infer that the user is focusing on the left stimulus.

Device/Application: Initially, intendiX was used to control a speller. Using the extendiX system, users can also control any smart home device such as a television, music player, air conditioner, or light. extendiX can control other devices as well, such as mobile robots or games. extendiX receives commands from intendiX via UDP and could thereby control any external device. In March 2012, g.tec presented the pre-release of their new Screen Overlay Control Interface (SOCI) at the CeBIT exposition in Hannover, Germany. Visitors to the g.tec booth could use the intendiX system to play World of Warcraft and Angry Birds, and additional game interfaces are being developed. The SOCI will be publicly available later in 2012.

Operating Environment: The intendiX system interacts with users in different ways, depending on whether it is a P300 or SSVEP BCI. Both approaches require paying attention to different regions of the monitor to produce distinct brain signals that the BCI can recognize. intendiX also includes software to determine when users are not paying attention based on their EEG signals. This way, the system can easily enter a "sleep" mode without any instruction from the user, and return to an active state when the user again begins paying attention to the activity on the monitor.

See also

References

  1. ↑ Farwell, LA; Donchin, E (1988). "Talking off the top of your head: toward a mental prosthesis utilizing event-related brain potentials". Electroencephalography and Clinical Neurophysiology. 70 (6): 510–23. doi:10.1016/0013-4694(88)90149-6. PMID 2461285. S2CID 4547500.
  2. ↑ Allison, B.Z., Faller, J., and Neuper, C. (2012). BCIs that Use Steady-State Visual Evoked Potentials or Slow Cortical Potentials. In: Brain-Computer Interfaces: Principles and Practice, editors: Wolpaw, J.R. and Wolpaw, E.W. Oxford University Press.
  3. ↑ Wolpaw, J.R., Birbaumer, N., McFarland, D.J., Pfurtscheller, G., and Vaughan, T. M. (2002). Brain–computer interfaces for communication and control. Clinical Neurophysiology, 113(6), 767-791.
  4. ↑ Allison, B.Z., Wolpaw, E.W., & Wolpaw, J.R. (2007). Brain computer interface systems: Progress and prospects. British review of medical devices, 4(4):463-474.
  5. ↑ Wolpaw, J.R. and Wolpaw, E.W. (2012). Brain-Computer Interfaces: Something New Under the Sun. In: Brain-Computer Interfaces: Principles and Practice, editors: Wolpaw, J.R. and Wolpaw, E.W. Oxford University Press.
  6. ↑ C. Guger, H. Ramoser, G. Pfurtscheller, Real-time analysis with subject-specific spatial patterns. IEEE Trans Rehabil Eng. 2000 Dec;8(4):447-56.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.