Third-generation Ford F-Series
1959 Ford F100
Overview
ManufacturerFord
Also calledMercury M-Series
Production1957–1960
1962–1971 (Brazil)
AssemblyNorth America

South America

Body and chassis
ClassFull-size pickup truck
Body style
LayoutFront engine, rear-wheel drive / four-wheel drive
Powertrain
Engine223 CID (3.7 L) Mileage Maker I6
272 CID (4.5 L) Y-block V8
292 CID (4.8 L) Y-block V8
Dimensions
Wheelbase110 in (2,794 mm) (F-100 6.5' bed)[1]
118 in (2,997 mm) (F-100/250 8' bed)
130 in (3,302 mm) (F-350 9' bed)
Chronology
PredecessorFord F-Series (second generation) (1953–1956)
SuccessorFord F-Series (fourth generation) (1961–1966)
Ford E-Series (panel van)

The third-generation of the Ford F-Series is a series of trucks that were produced by Ford from 1957 until 1960. Following its competitors at Dodge and General Motors, Ford widened the front bodywork to integrate the cab and front fenders together. Going a step further, the F-Series integrated the hood into the bodywork with a clamshell design;[1] the feature would stay part of the F-Series for two decades. Although offered previously, the optional chrome grille was far more prominent than before. In the rear, two types of pickup boxes were offered, starting a new naming convention: the traditional separate-fender box was dubbed "Flareside", while "Styleside" boxes integrated the pickup bed, cab, and front fenders together. As before, Ford still offered a low-GVWR version of each model.

In May 1957, Ford discontinued building trucks at the Highland Park Ford Plant in Highland Park, Michigan. All light and medium trucks were transferred to 10 other plants in the USA. After 1969, heavy-duty trucks (above F-350) and some light duty trucks were transferred to Kentucky Truck Assembly in Louisville, Kentucky. Third generation trucks were built in Brazil as the F-100, F-350, and F-600 from 1962 until 1971, featuring only the 292 cu.in. Y-Block V8.

OHV sixes and V8s were the same ones as used in Ford cars of the era.

This was the last generation of the panel van. Ford would not offer a full-size van again until the 1968 introduction of the second generation E-Series.

Yearly changes

1958

The grille was updated; the dual headlights are replaced by quad headlights (the only generation of the F-Series to use them).

1959

Ford introduced the option of the F-Series in four-wheel drive. Previously a conversion outsourced to Marmon-Herrington, Ford was the first of the "big three" U.S. manufacturers to manufacture four-wheel drive trucks on its own.

Models:

  • F-100 (F10, F11, F14): 1/2 ton (4,000–5,000 GVWR max)
  • F-100 (F18, F19)(4×4): 1/2 ton (4,000–5,600 GVWR max)
  • F-250 (F25, F26): 3/4 ton (4,900–7,400 GVWR max)
  • F-250 (F28, F29)(4×4): 3/4 ton (4,900–7,400 GVWR max)
  • F-350 (F35, F36): 1 ton (7,700–9,800 GVWR max)

Engines:

Engine Years Power
223 CID Mileage Maker I61958–1960
272 CID Y-block V81958
292 CID Y-block V81959–1960

Construction in Argentina

Third generation trucks were built in Argentina from 1959 to 1961 as the F-100[2] and F-600.[3]

References

  1. 1 2 Gunnell, John A. (1993). Standard Catalog of American Light-Duty Trucks. krause Publications. ISBN 0-87341-238-9.
  2. ↑ "Coche Argentino - Ford_F100".
  3. ↑ "Camión Argentino: Ford F-600 (1959-1961)". 22 October 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.