Rover 3-litre

The shape of cars was changing dramatically during the 1950s as soft rounded curves gave way to straight lines and sharp corners. Improvements in construction enabled engineers to dispense with a separate chassis, allowing passengers to sit lower in the vehicle. The development of curved glass also gave stylists new opportunities. A visit to the 1955 Paris Auto Show would have a profound effect on Bache's style vocabulary. He was very taken with the revolutionary new Citroen DS, as well as the imposing Facel Vega. Other influences were the Italian coach-builder Ghia's designs for Chrysler, and work of Pininfarina, who had been commissioned to produce a coupé and convertible on the Rover P4 chassis prior to Bache's arrival.

Rover P5 3-litre

Bache created the shape for the P5, then expected to be a smaller, higher volume model of a similar size to the current Ford Zephyr. Bache's first attempts were distinctly modern and anticipated generous use of chrome fittings. It did not please Rover Managing Director Maurice Wilks who, before Bache's arrival had closely overseen all styling. "It's a head turner", Wilks explained, "The Rover Company don't make head-turners. We like to make vehicles which pass unobtrusively and are not noticed." Bache went back to the drawing board and came up with something more like an evolution of the P4. But after a full-size mock-up for the P5 was completed, Wilks changed direction. The success of the Land Rover, originally intended as a stop-gap model to help Rover's exports after the war, meant all available space in the Solihull factory was being taken up with meeting this demand. There simply was no room for a new high-volume model. The decision was taken in 1956 to make the P5 a larger lower-volume car. Bache's started again, and produced an imposing unfussy design. The straight line running from the top of the front wing to the rear and slab sides are reminiscent of the Facel Vega, as was the wrap-around front windscreen. It is a tribute to Bache's vision that while the P4 went through at least three facelifts, the shape of the P5 remained unchanged for fifteen years.

Rover 2000

Rover 2000

With his 1963 Rover P6, Bache broke new ground not only with its external styling, but with its imaginative interior styling too, including an "open plan" dashboard and individual rear bucket seats.^[3]

Bache's design for a big Rover saloon to compete with Jaguar's XJ6 was cancelled at the last moment. A mid-engined coupé prototype was also cancelled.^[1]

Range Rover

Bache had a hand in the styling of the Range Rover that was launched in 1970, although the basic lines had already been defined by Spen King and Gordon Bashford.^[3] David Bache smoothed the prototype's functional lines and must share in the credit for the car's award-winning design.^[1]

Rover SD1

Rover SD1

Bache's final Rover was the 1976 SD1 - the replacement for his P6. It was notable for its ground-breaking five-door hatchback design on a large executive car and its bold interior, winning the 1977 European Car of the Year award.^[3] Its success was hampered by BL's notorious production and reliability problems.^[1]

Metro and Maestro

As chief stylist at BL, Bache was also involved in the design of the 1981 Austin Metro. He also made improvements to Ian Beech's Austin Maestro design.^[4][5]

After being forced to resign from his post by newly installed BL chief Harold Musgrove in 1982 following disagreements over the yet-to-be-launched Austin Maestro, and his replacement by Roy Axe, he set up his own design company,^[5] David Bache Associates which worked outside the motor industry as much as inside it.^[1]