China Railways SL3 (勝利3) South Manchuria Railway Pashisa class (パシサ) Manchukuo National Pashisa class (パシサ) North China Transport Pashisa class (パシサ) Korean State Railway Pasisŏ class (바시서)
China Railway PX3 class ㄆㄒ3 120 in October 1952
Type and origin Power type Steam Builder Hitachi, Kisha Seizō Build date 1934–1940 Total produced 96
Specifications Gauge 1,435 mm (4 ft 8+1⁄2 in)

The China Railways SL3 (勝利3, Shènglì, "victory") class steam locomotive was a class of 4-6-2 passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway, the Manchukuo National Railway and the North China Transportation Company by several Japanese manufacturers between 1934 and 1940. They were designed in 1933 based on the design of the first Pashisa class locomotives (later reclassified Pashishi class); the first order was placed by Mantetsu in March of that year.^[1]

History

Builder's photo of Manchukuo National Railway locomotive パシシ5845

Builder's photo of North China Transport locomotive パシサ1523

After the Chosen Government Railway Bureau entrusted the management of the North Chosen Line between Cheongjin and Unggi in Korea to the South Manchuria Railway (Mantetsu), Mantetsu ordered sixteen of these locomotives, which were built in 1934 and 1935 by Hitachi and Kisha Seizō of Japan.^[1] These were designated Pashisa (パシサ) class, after the previous class of locomotives with that designation were reclassified Pashiha class in 1933. Care was taken during the design process to maximise the commonality of parts between these engines and those of the MNR Mikaro, Mantetsu Mikasa and Mantetsu Mikaro class freight locomotives.^[1]

The Mantetsu Pashisa class was identical to the Manchukuo National's Pashishi (パシシ) class, which were built to use lignite fuel. The first ten of these were built by Hitachi in 1934, these were called the "National Small Pashi" (國小パシ).^[1] After the acquisition of the Chinese Eastern Railway in March 1935 and the conversion of its mainline from Harbin to Xinjing from 1,520 mm (4 ft 11+27⁄32 in) Russian gauge to standard gauge, they were used to pull express trains, including the Asia Express, on that section. At the end of 1935, when the emperor of Manchukuo, Puyi, visited Harbin for the first time, his train was hauled by one of these locomotives.

The firegrate on the MNR Pashishis proved to be too small and so were increased by 0.5 m² (5.4 sq ft), and at the same time, the firebox area was also enlarged by 0.4 m² (4.3 sq ft). This new design, dubbed "New National Small Pashi" (新國小パシ), were 2.60 t (2.56 long tons; 2.87 short tons) heavier than the National Small Pashi, and twenty were built for the Manchukuo National in 1936 by Hitachi and Kisha Seizō.^[1]

In the unified classification scheme of 1938, the Mantetsu Pashisa and Manchukuo National Pashishi classes were combined as the Pashisa class.^[1]

Twenty were built by Hitachi in 1939 for North China Transport, numbered 1501 through 1520, followed by another 30 in 1939–1940 from Kisha Seizō, numbered 1521 through 1550.

Postwar

China Railways SL3 (勝利3)

China Railways SL3 152 at the China Railway Museum

The thirty Pashisa-class locomotives belonging to the Manchukuo National were assigned to the Fengtian (1), the Jilin (5), the Mudanjiang (7), and the Qiqihar Railway Bureaus (11), and six were out on loan to other railways. These, along with the thirty belonging to North China Transport, were taken over by the Republic of China Railway. In 1951, they were classified class ㄆㄒ三 (PX3) by the China Railway, becoming class SL3 (勝利, Shènglì, "victory") in 1959; they were initially numbered in the 101–270 range (other sources say 101–188). In 1980, twelve locomotives with numbers ranging from 114 to 264 were seen in service around China, including in Shanghai, Beijing, Zhengzhou and Guangzhou. SL3 152 is preserved at the China Railway Museum in Beijing.

Class Specifications

^[1]

References