Bagdad Bypass

Tasmania
General information
TypeHighway  (Proposed)
Length16 km (9.9 mi)
Route number(s) National Highway 1
Major junctions
South end Brighton Bypass (Midland Highway, National Highway 1)
North end Midland Highway (National Highway 1, Dysart)
Location(s)
Major settlementsBagdad
Highway system

The Bagdad Bypass is a proposed bypass of the Midland Highway, through Bagdad, Tasmania. While not a new proposal, the idea began gaining momentum on the release of the Southern Transport Investment Program in 2007. The road will be initially constructed as a two-lane highway with extra earthworks undertaken to facilitate future duplication of the bypass. The road will be constructed as a grade separated highway and has been designed to seamlessly connect to the Brighton Bypass. In 2010, the Department of Infrastructure, Energy and Resources released 2 potential alignments for public comment. Neither design existed wholly within the existing proclaimed corridor and ultimately, a combination of the two designs was chosen to minimize intrusion into townships while at the same time keep construction costs to a minimum by diverting the future highway away from areas that would require significant earthworks.[1][2]

See also

icon Australian Roads portal

References

  1. ↑ "Bagdad Bypass Alignment" (PDF). Department of Infrastructure, Energy and Resources. 2013. Archived from the original (PDF) on 3 March 2014. Retrieved 2014-03-03.
  2. ↑ "Program of Works Tasmania - 2013" (PDF). Department of Infrastructure and Transport. 2013. Archived from the original (PDF) on 11 February 2014. Retrieved 2014-03-03.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.