Alfa Romeo Scarabeo
Overview
ManufacturerAlfa Romeo
Production1966
3 made
AssemblyItaly
DesignerSergio Sartorelli[1][2] at OSI
Body and chassis
ClassConcept car
Body style2-seat coupé
LayoutRear mid-engine, rear-wheel-drive
PlatformAlfa Romeo Tipo 33
DoorsCanopy (first)
Powertrain
Engine1,570 cc (95.8 cu in) DOHC Inline-four engine[3]
Transmission5-speed manual
Dimensions
Length3,720 mm (146.5 in)[3]
Width1,560 mm (61.4 in)[3]
Height1,020 mm (40.2 in)[3]
Kerb weight700 kg (1,543.2 lb)[3]
Chronology
SuccessorAlfa Romeo Scarabeo II

The Alfa Romeo Scarabeo is a concept car engineered by Giuseppe Busso and Orazio Satta Puliga for Alfa Romeo with a body designed by Sergio Sartorelli at Officine Stampaggi Industriali. The car debuted at the Paris Motor Show in 1966.[4]

Background

After the Alfa Romeo Tipo 33 project was passed on to Autodelta, Giuseppe Busso proposed a new rear-engined sports car to Orazio Satta Puliga and his design team. The car was to use the same tubular chassis of the Tipo 33, but it was to be cheaper and lighter than previous designs.[5]

The Scarabeo project was dropped in favor of a full racing program at Autodelta. The second and third prototype currently reside at the Alfa Romeo Museum.[6]

The first concept finished in silver

Specifications

The Alfa Romeo Scarabeo is a rear-engined, coupé-styled prototype vehicle. Its wheelbase measures 215 cm (84.65 inches) and has a total length of 372 cm (146.46 inches). The front axle has a length of 131 cm (51.57 inches) while the rear axle is an inch longer at 132 cm (51.97 inches). The total width of the car is 156 cm (61.42 inches), and the height is 102 cm (40.16 inches). The car has a curb weight of 700 kg or 1543 lb. In an effort to save costs, the suspension was based on the Renault R8 and the engine was taken from the Alfa Romeo GTA. The engine used in the Alfa Romeo Scarabeo is an inline four-cylinder with a cylinder capacity of 1,570 cc.[4] The engine's cylinder block and head are made out of light-alloy. It has a DOHC (double overhead camshaft, the camshaft is in the cylinder head above the combustion chamber) with double chain control. The Alfa Romeo Scarabeo is petrol-powered and uses a 2 weber carb fuel system. Its engine has the power to produce a maximum of 115 brake horsepower and 142.0 Nm (104 pounds foot) of torque at 6000 revolutions per minute.[7] The Alfa Romeo Scarabeo reaches 0-60 mph in 7 seconds and 0–100 km/h in 7.4 seconds. The car will reach its top speed of 200 km/h in 51.9 seconds and has a quarter-mile time of 15.6 seconds.[8] A five-speed manual gearbox is used to transfer the engine's power to the road via its rear wheels (RWD). To brake, the vehicle has brake discs on the front and rear wheels. The engine has eight valves and a compression ratio of 9.70. The engine, clutch, and gearbox (in one block) were mounted vertically and transversely on the left-handed side to allow the side of the engine with the hot exhaust to be directed away from the cockpit and at the rear of the car. The carburetors are located directly behind the left-handed seat due to this placement of the engine. The vehicle was made as a right-hand drive to distance the driver from the engine's loud carburetors and distribute the weight inside the vehicle more efficiently for better handling.[9]

Body design and features

One of the things the Alfa Romeo Scarabeo prototype was used for was to explore how seating the driver in the vehicle as far back as possible would affect their ability to control the car. The belief was that the further back the driver sat, the better the driver would be able to assess the behavior of the vehicle and therefore control it. The vehicle's noticeably thin and long front can be dedicated to the testing of this principle.[6] One of the features unique to this concept car is the lack of doors. The cockpit is accessed by tipping the forward hinged canopy. A lack of doors allows for a panoramic windscreen that is accompanied by one windshield wiper. The second prototype of the Scarabeo, was more conventional with two side doors, a conventional windscreen, and left-hand drive. As a result, the body style is significantly less angular, and thicker in the front of the car than the original prototype Scarabeo. The first two prototypes have a Kamm tail rear at the end of the shell that encases the mechanics of the car. This design kept with the aerodynamics and styling of the era. The third and final Alfa Romeo Scarabeo was an experimental prototype and styled to be a sports "Barchetta" or open body car. This prototype was never finished which is why the engine remains exposed at the rear of the car.[9]

Innovative features

Not only was this prototype vehicle designed to test the relationship between the diver's position and their ability to control the vehicle, but a new chassis approach was designed and tested on the Alfa Romeo Scarabeo. The large-diameter tubular chassis was H-framed and later used in Alfa Romeo's Tipo 33. Those same large-diameter tubes were also incorporated in the fuel tanks in both the Alfa Romeo Scarabeo and Tipo 33. The tubes created a system that spread the liquid's weight around the car more equally for better weight distribution and balance.[6] In the Scarabeo, the fuel tanks are located in the longitudinal members on the sides of the cockpit. This fuel tank design made space available at the rear of the vehicle to mount the engine transversely. Other key features in the Alfa Romeo Scarabeo are that the clutch and gearbox were included in the engine block, the rear brakes were centrally located, and the differential was an integral unit.[6]

References

  1. ↑ "1966 OSI ALFA ROMEO SCARABEO". archivioprototipi.it (in Italian). Retrieved 17 December 2019.
  2. ↑ "1966 ALFA ROMEO OSI SCARABEO". archivioprototipi.it (in Italian). Retrieved 17 December 2019.
  3. 1 2 3 4 5 Ardizio, Lorenzo (2015). Alfa Romeo All the Cars. Giorgio Nada Editore. pp. 228–229. ISBN 978-8879115902.
  4. 1 2 "SCARABEO - 1966". Museo Storico Alfa Romeo. Retrieved 16 June 2018.
  5. ↑ Collins, Peter; McDonough, Ed (2006). Alfa Romeo Tipo33: The Development,Racing and Chassis History. Veloce. pp. 9–15. ISBN 1904788718.
  6. 1 2 3 4 Breeze, Joe. "Classic Concepts: 1966 Alfa Romeo Scarabeo by OSI". Classic Driver. Retrieved 16 June 2018.
  7. ↑ "Alfa Romeo Scarabeo Technical Specs, Dimensions". www.ultimatespecs.com. Retrieved 2021-11-05.
  8. ↑ "Full performance review of 1966 Alfa Romeo Scarabeo Osi (man. 5) model for prototype". www.automobile-catalog.com. Retrieved 2021-11-05.
  9. 1 2 "Alfa Romeo Scarabeo". www.fcaheritage.com. Retrieved 2021-11-05.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.