Air abrasion is a dental technique that uses compressed air to propel a thin stream of abrasive particles—often aluminum oxide or silica—through a specialized hand-piece to remove tooth tissue and decay before being suctioned away, similar to sand blasting. It can be used in a variety of dental procedures, including removing tooth decay, stains, and old restorations, as well as to prepare teeth for new restorations, sealants, and bonding.[1][2][3][4]

Advantages and disadvantages

Advantages of air abrasion include that it preserves more healthy tooth tissue (which can increase the strength and longevity of restorations), and has less risk of fracturing or chipping a tooth when compared to a traditional pneumatic dental drill. Air abrasion generates minimal noise, vibration, pressure, and heat, all of which can increase patient comfort and reduce or eliminate the need for local anesthesia.[1][2][3][4]

Disadvantages of air abrasion include not being appropriate for removing decay in all situations (such as deep decay or decay between teeth), possible aggravation of certain medical conditions (such as asthma and chronic obstructive pulmonary disease), and the initial investment costs of an air abrasion system.[1][2][4] Additionally, there are some concerns related to the possible health effects of inhaling abrasive particles and clean up concerns, although these can be minimized by using a dental dam and good suction.[5][6]

History

In the 1940s, Dr. Robert Black began researching air abrasion technology and its use in dentistry. In 1951, Dr. Black and S.S. White Dental Manufacturing Co. released the first commercial dental air abrasion system, the Airdent air abrasion unit.[6][7][8] The unit failed to gain wide popularity due to several factors, including the inability of air abrasion to prepare the well-defined margins and walls needed for the amalgam restorations used at the time, the lack of high-velocity suction available for powder control, and the introduction of the time-saving air turbine drill. Air abrasion began to resurface in the 1990s with the rise of adhesive dentistry.[2][6]

See also

References

  1. 1 2 3 "Air Abrasion: Dental Care Without the Drill". WebMD. 22 December 2021. Retrieved 9 April 2022.
  2. 1 2 3 4 Sambashiva, Rao; Pratap, Kumar; Nanda, Kumar; Sandya, P.S. (28 September 2011). ""Drill-less" Dentistry- The New Air Abrasion Technology". Indian Journal of Dental Advancements. National Academy of Dentistry. 03 (3): 598–601. doi:10.5866/3.3.598. ISSN 2229-5127.
  3. 1 2 Huang, CT; Kim, J; Arce, C; Lawson, NC (2019). "Intraoral Air Abrasion: A Review of Devices, Materials, Evidence, and Clinical Applications in Restorative Dentistry". Compendium of Continuing Education in Dentistry. 40 (8): 508–514. ISSN 1548-8578. PMID 31478697.
  4. 1 2 3 Mandinic, Zoran; Vulicevic, Zoran; Beloica, Milos; Radovic, Ivana; Mandic, Jelena; Carevic, Momir; Tekic, Jasmina (2014). "The application of air abrasion in dentistry". Srpski Arhiv Za Celokupno Lekarstvo. National Library of Serbia. 142 (1–2): 99–105. doi:10.2298/sarh1402099m. ISSN 0370-8179. PMID 24684041.
  5. ↑ Liebenberg, WH (1997). "A useful evacuation aid for intraoral air-abrasive devices" (PDF). Quintessence International. 28 (2): 105–8. ISSN 0033-6572. PMID 10332363. Retrieved 20 April 2022.
  6. 1 2 3 Hegde, Vivek S; Khatavkar, Roheet A (2010). "A new dimension to conservative dentistry: Air abrasion". Journal of Conservative Dentistry. 13 (1): 4–8. doi:10.4103/0972-0707.62632. PMC 2883800. PMID 20582212.
  7. ↑ Ross, Harold; Flagler, J.M.; Gill, Brendan (7 April 1951). "Less Drilling". The New Yorker. Retrieved 10 April 2022.
  8. ↑ Braithwaite, Max (1 July 1951). "It Really Doesn't Hurt A Bit". Maclean's. Archived from the original on 25 January 2021. Retrieved 12 April 2022.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.