Visual Land Prestige Elite 7Q Speaker Replacement

Written By: Sabrina Scholten
  • Comments: 0
Visual Land Prestige Elite 7Q Speaker Replacement

Difficulty

Difficult

Steps

4

Time Required

10 - 15 minutes

Introduction

Complete the following guide to replace your tablet's speaker.

  1. fdZI252DnhWSxsLk
    fdZI252DnhWSxsLk
    lPXRGiBLoapjcpqq

    • At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

  2. itFUpn63eDdP3smI
    itFUpn63eDdP3smI
    CU4QrEftwyWQaKaY

    • Wedge a plastic opening tool into the edges of the tablet to pry it open.

  3. UrLo2Wxoasgc6NUK
    UrLo2Wxoasgc6NUK
    IThPD5KKhyaUoYLQ
    3PJxvyAk66wRuiE5

    • Soldering iron may be dangerous for inexperienced users. For additional information on how to use a soldering iron, click here.

    • Use a soldering iron to detach the speaker wires from the motherboard.

  4. dIQWVNUGuM3pJ5Fs
    dIQWVNUGuM3pJ5Fs
    RjUZZqCwFBgC2KVy
    HgBpqoQFHdFqTi3E

    • Use a curved metal spudger to remove the speaker from the back case.

    • The speaker is held in place by an adhesive and can be difficult to remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sabrina Scholten

Member since: 22/09/16

621 Reputation

0 comments