VTech Learning Tunes Karaoke Volume Switch Replacement

Written By: Lezette Leuterio
  • Comments: 0
VTech Learning Tunes Karaoke Volume Switch Replacement

Difficulty

Moderate

Steps

7

Time Required

15 - 30 minutes

Introduction

Are you unable to adjust the volume? This guide may help solve your problem.

  1. EDBLItLA34UDKnSB

    • To remove the battery door, loosen the screw using a Flathead screwdriver.

    • A coin can also be used to loosen the screw.

  2. KrMxVMKQlA1q4aCF
    KrMxVMKQlA1q4aCF
    Ztnc6SC4aofge1KY

    • Remove the battery door and take out the batteries.

  3. OmbWk5AEkTU3wxMi

    • Remove the six 9.5 mm Phillips #2 screws.

    • Remove the six 6.0 mm Phillips #2 screws.

  4. DL1ZW5pCtNnsCPkU
    DL1ZW5pCtNnsCPkU
    hMwGPuac33Ft5AER

    • Gently pull up on the rear panel.

    • Be careful to not pull on the wire connections.

    • Gently place the back panel underneath the top panel with the tops facing each other, as shown in the picture.

  5. SfATKDFkIp6gkFdn
    SfATKDFkIp6gkFdn
    buKa3cYETWLZYZfn

    • Using a Phillips PH1 screwdriver, remove the two 7.9 mm volume switch board screws.

  6. AG2fnArngaBywTWv

    • Once the screws have been removed, carefully move the volume switch board.

  7. KhtJQlqA1TJSUVqH
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Lezette Leuterio

Member since: 09/02/16

101 Reputation

0 comments