Introduction
The sink is one of the most overused fixtures in our lives. In this guide, the process of replacing a pop-up stopper in the bathroom sink is useful to plug the drain to fill the sink with water and to also catch any unwanted items disappearing down the drain.
Tools
-
-
Place bucket directly under the sink below the pop-up assembly. Excess water may leak
-
The pivot rod that is inserted within a hole in the pop-up extension bar. Move the pop-up extension bar away from the pivot rod.
-
-
-
Lift up the center pop-up rod on the faucet until it is detached. The extension rod will pull up with it.
-
-
-
Below the sink is the pivot nut. Turn the pivot nut counterclockwise until it is completely loose and remove from the pivot rod.
-
-
-
In the sink, the pop-up stopper will be loose.
-
Pull up on the pop-up stopper to separate it from the main pop-up assembly.
-
To reassemble your device, follow these instructions in reverse order.
