Oontz Angle 3 ULTRA Micro USB Port Replacement

Written By: Ian
  • Comments: 3
Oontz Angle 3 ULTRA Micro USB Port Replacement

Difficulty

Very difficult

Steps

6

Time Required

30 minutes

Introduction

If your Oontz Angle 3 ULTRA speaker is not charging or connecting to external devices, you may need to replace your speaker’s Micro USB port. This replacement guide will walk you through replacing the Micro USB port of your Oontz Angle 3 ULTRA Bluetooth speaker. For this guide, you will need a spudger, a Soldering Iron with Solder Wick or a Solder Sucker, and tweezers. Follow this guide to learn how to solder and de-solder connections. How To Solder and Desolder Connections

  1. YUbPfQ6RbZakYaNN
    YUbPfQ6RbZakYaNN
    EvIX5qtFMrWxZYAU
    vKxGJBCqoyPAdfS5

    • Remove the two black rubber sheaths around the edges of the speaker.

    • Under the symbol-marked sheath there is a white rubber covering for the buttons. Peel this away to reveal the panel underneath.

    • On two corners of its triangular face there is a small divot, which allows you to use your fingernails or a pair of tweezers to grip and peel away the covering.

  2. oDoGZE3dPGSJFVpS
    oDoGZE3dPGSJFVpS
    dgcu4RoGcKFURUpE
    l3bMUFUBxLPxVE5L

    • Use a JIS #0 screwdriver to remove the six screws to expose the motherboard.

  3. fkAq2Vm3TKoiw1lL
    fkAq2Vm3TKoiw1lL
    5aexYmHKcxTsnDPe
    xERrraHvXaOZtAPg

    • Using a pair of tweezers, pinch and pull the rubber fillings obstructing the screws.

  4. a1DdR5GASZUugcEX
    a1DdR5GASZUugcEX
    hFA55fndcvYKNs2B
    bqlZBLilAQldajJP

    • Using a JIS #0 screwdriver, remove the 6 screws holding the backplate in.

    • Remove the back panel off of the device.

    Where can I get the mother board and other parts to buy for the Oontz angel 3 please

    Christopher Dunkley -

  5. Ndqv14dyK5yG1KyS

    • Gently push the ports away from the speaker enclosure with the spudger to free the motherboard.

  6. c3JcnrfYHOv6xQXq

    Please tell us who makes the MICRO USB CONNECTOR that we are attempting to replace?

    MFG NAME:

    MFG PN:

    Steve Michalski -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ian

Member since: 16/01/20

383 Reputation

One comment

These instructions are great, but they're useless unless you can find a replacement micro USB port… Any suggestions? Because I couldn't find one online that indicated it was compatible with the OontZ…

mango -