Nobis NB07 Speaker Replacement

Written By: Daniel Gomero
  • Comments: 2
Nobis NB07 Speaker Replacement

Difficulty

Difficult

Steps

9

Time Required

20 - 30 minutes

Introduction

You will be able to use this guide to successfully replace a faulty speaker on your tablet. To do so, you will need to disassemble your tablet and use soldering tools.

  1. rFi2fqDxS6EjjHxY

    • Look towards the topside of the tablet, where the power button is located.

    • Insert a plastic opening tool in the crack between the two parts of the case.

    • Move it gently back and forth to open the case.

  2. nVx4VHobZE1FksaY
    nVx4VHobZE1FksaY
    yKBkMhDlMFOqWDAX
    eNJHZkGXvvGXPYnG

    • With the plastic opening tool in the opening between the two sides of the case, slide the tool along the tablet's border to separate the two sides completely.

    • Be careful when you separate the two halves. Open the case from the opposite side of the camera, there is a cable connecting both halves of the case.

  3. lovyBpP4PBuveIDL
    lovyBpP4PBuveIDL
    dHapKFTKUSZofwow
    1pXBmRrSrULpFaqI

    • Remove the tape holding the battery in place.

  4. IRNF3H6vc5tAjnkl
    IRNF3H6vc5tAjnkl
    aLKyTAtmDbaZX2HO
    gJL2awI5osS3VhrD

    • Insert the flat end of the spudger tool in the crack beneath the battery.

    • Move the spudger tool carefully side to side to remove the glue that is holding the battery in place.

    • This is a soft battery, so a little bending is expected.

  5. 4IvCeQxsfXZdg3oP

    • After the battery is unglued, locate the cables that connect it to the motherboard.

    • Annotate where each color goes to make the reassembly easier.

  6. eJQSeBLYFthaYwAL
    eJQSeBLYFthaYwAL
    lTq22X6fjugU1oDL

    • Desolder the cables with a soldering iron and use a desoldering braid to remove the solder.

    • Review the Ifixit soldering guide if you need help soldering.

    • You can now remove the battery.

  7. jEnDKRVlsROpOor6
    jEnDKRVlsROpOor6
    GgVknbBNGjTKxTpu
    tjnKItkndeyVaFdl

    • Remove the tape holding the speaker in its socket.

  8. lYHXY4AFOHPHgMW3
    lYHXY4AFOHPHgMW3
    wJS2CK5xgCS6KfIb

    • After you remove the tape, remove the speaker from its socket. You can place the speaker on one side of the tablet to have more freedom.

    • Look for the place where the speaker's cables meet with the motherboard.

    • Annotate where which color goes to make the reassembly easier.

  9. V121ePZymOqWKOv1
    V121ePZymOqWKOv1
    ZBZckDQ1OuGhVYZE

    • Use a soldering iron to desolder the cables and extract the solder using a desoldering braid.

    • Review the Ifixit soldering guide if you need help soldering.

    • You can now remove the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Daniel Gomero

Member since: 21/01/15

966 Reputation

2 comments

How can I restore the memory on these tablets - were having problems with this tablet please help us

annievvtait07 -

This is my favourite online game mahjong games online i have some time play.

conor mcgregor -