Introduction

This is a guide to replace the battery of the Chromo Noria. Replacing the battery is one of the main important replacements. Without a functional battery, the life of the tablet ceases to exist.

  1. VC6J6VVHNklMcoLr
    VC6J6VVHNklMcoLr
    MWpmdAVQCqhJ5dGp
    OU1wsvD2Yle6s4TW
    • Insert your Plastic Opening Tool into the crease between the front panel and back panel.

    • Slide the Opening Tool around the entire device. As you progress, you should see the device open.

  2. KgBEhksD6cgjwpmI
    • Carefully turn the device over.

    • Lay the back panel aside so you can see the device's parts.

  3. rGDdj51CauASTpIr
    rGDdj51CauASTpIr
    A2HAFxUJ23quxLtp
    S5i1XNHYDHOAALZo
    • Place your finger at the end of the tape closest to the battery.

    • Peel the tape towards the flex cables to free the battery wires.

  4. JtpH2EhQOcRYBMWM
    JtpH2EhQOcRYBMWM
    gXIMFnLGkbsGO4Rw
    HJGFWgywWMZ5nvYG
    • Using the spudger tool, place the tool along an edge of the battery.

    • Be careful not to bend or break the battery! Batteries contain hazards materials.

    • Move the spudger around the edges of the battery to detach it from the tablet.

  5. PVnD3V4vuwiX55lI
    • Soldering irons get very hot! Be careful when handling one. If you'd like a tutorial on how to use one, click here.

    • Using a soldering iron, desolder both of the battery wires. The battery's wires are located to the left of the camera's flex cable.

    • Remove the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Nguyen

Member since: 31/10/16

159 Reputation

0 comments