Triflic acid
Trifluoromethanesulfonic acid
Names
IUPAC name
Trifluoromethanesulfonic acid
Other names
Triflic acid
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.014.625
UNII
  • InChI=1S/CHF3O3S/c2-1(3,4)8(5,6)7/h(H,5,6,7) checkY
    Key: ITMCEJHCFYSIIV-UHFFFAOYSA-N checkY
  • InChI=1/CHF3O3S/c2-1(3,4)8(5,6)7/h(H,5,6,7)
    Key: ITMCEJHCFYSIIV-UHFFFAOYAW
  • C(F)(F)(F)S(=O)(=O)O
Properties
CF3SO3H
Molar mass 150.07121 g/mol
Appearance Colorless liquid
Density 1.696 g/mL
Melting point −40 °C (−40 °F; 233 K)
Boiling point 162 °C (324 °F; 435 K)
1600 g/L
Vapor pressure 3.2
Acidity (pKa) −14.7±2.0[1]
Conjugate base Triflate anion
Viscosity 1.864–1.881 mm2/s at 20 °C
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
 Causes severe acid burns
GHS labelling:
GHS05: Corrosive GHS07: Exclamation mark
Danger
H290, H302, H314, H335, H402
P234, P261, P264, P270, P271, P273, P280, P301+P312+P330, P301+P330+P331, P303+P361+P353, P304+P340+P310, P305+P351+P338+P310, P363, P390, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamond
4
0
2
ACID
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references
Trifluoromethanesulfonic acid

Triflic acid, the short name for trifluoromethanesulfonic acid, TFMS, TFSA, HOTf or TfOH, is a sulfonic acid with the chemical formula CF3SO3H. It is one of the strongest known acids. Triflic acid is mainly used in research as a catalyst for esterification.[2][3] It is a hygroscopic, colorless, slightly viscous liquid and is soluble in polar solvents.

Synthesis

Trifluoromethanesulfonic acid is produced industrially by electrochemical fluorination (ECF) of methanesulfonic acid:

The resulting CF3SO2F is hydrolyzed, and the resulting triflate salt is reprotonated. Alternatively, trifluoromethanesulfonic acid arises by oxidation of trifluoromethylsulfenyl chloride:[4]

Triflic acid is purified by distillation from triflic anhydride.[3]

Historical

Trifluoromethanesulfonic acid was first synthesized in 1954 by Robert Haszeldine and Kidd by the following reaction:[5]

Reactions

As an acid

In the laboratory, triflic acid is useful in protonations because the conjugate base of triflic acid is nonnucleophilic. It is also used as an acidic titrant in nonaqueous acid-base titration because it behaves as a strong acid in many solvents (acetonitrile, acetic acid, etc.) where common mineral acids (such as HCl or H2SO4) are only moderately strong.

With a Ka = 5×1014, pKa = −14.7±2.0,[1] triflic acid qualifies as a superacid. It owes many of its useful properties to its great thermal and chemical stability. Both the acid and its conjugate base CF3SO−
3, known as triflate, resist oxidation/reduction reactions, whereas many strong acids are oxidizing, such as perchloric or nitric acid. Further recommending its use, triflic acid does not sulfonate substrates, which can be a problem with sulfuric acid, fluorosulfuric acid, and chlorosulfonic acid. Below is a prototypical sulfonation, which triflic acid does not undergo:

Triflic acid fumes in moist air and forms a stable solid monohydrate, CF3SO3H·H2O, melting point 34 °C.

Salt and complex formation

The triflate ligand is labile, reflecting its low basicity. Trifluoromethanesulfonic acid reacts exothermically with metal carbonates, hydroxides, and oxides. Illustrative is the synthesis of Cu(OTf)2.[6]

Chloride ligands can be converted to the corresponding triflates:

This conversion is conducted in neat HOTf at 100 °C, followed by precipitation of the salt upon the addition of ether.

Organic chemistry

Triflic acid reacts with acyl halides to give mixed triflate anhydrides, which are strong acylating agents, e.g. in Friedel–Crafts reactions.

Triflic acid catalyzes the reaction of aromatic compounds with sulfonyl chlorides, probably also through the intermediacy of a mixed anhydride of the sulfonic acid.

Triflic acid promotes other Friedel–Crafts-like reactions including the cracking of alkanes and alkylation of alkenes, which are very important to the petroleum industry. These triflic acid derivative catalysts are very effective in isomerizing straight chain or slightly branched hydrocarbons that can increase the octane rating of a particular petroleum-based fuel.

Triflic acid reacts exothermically with alcohols to produce ethers and olefins.

triflic acid condensation reaction
triflic acid condensation reaction

Dehydration gives the acid anhydride, trifluoromethanesulfonic anhydride, (CF3SO2)2O.

Safety

Triflic acid is one of the strongest acids. Contact with skin causes severe burns with delayed tissue destruction. On inhalation it causes fatal spasms, inflammation and edema.[7]

Like sulfuric acid, triflic acid must be slowly added to polar solvents to prevent thermal runaway.

References

  1. 1 2 Trummal, A.; Lipping, L.; Kaljurand, I.; Koppel, I. A.; Leito, I. (2016). "Acidity of Strong Acids in Water and Dimethyl Sulfoxide". Journal of Physical Chemistry A. 120 (20): 3663–3669. Bibcode:2016JPCA..120.3663T. doi:10.1021/acs.jpca.6b02253. PMID 27115918. S2CID 29697201.
  2. ↑ Howells, R. D.; McCown, J. D. (1977). "Trifluoromethanesulfonic Acid and Derivatives". Chemical Reviews. 77 (1): 69–92. doi:10.1021/cr60305a005.
  3. 1 2 Subramanian, L. R.; Martinez, A. G.; Hanack, M.; Prakash, G. K. S.; Hu, J. (2006). "Trifluoromethanesulfonic Acid". Encyclopedia of Reagents for Organic Synthesis. John Wiley & Sons. doi:10.1002/047084289X.rt246.pub2. ISBN 0-471-93623-5.
  4. ↑ Siegemund, G.; Schwertfeger, W.; Feiring, A.; Smart, B.; Behr, F.; Vogel, H.; McKusick, B. (2000). "Fluorine Compounds, Organic". Ullmann's Encyclopedia of Industrial Chemistry. John Wiley & Sons. doi:10.1002/14356007.a11_349. ISBN 3527306730.
  5. ↑ Haszeldine, R. N.; Kidd, J. M. (1954). "Perfluoroalkyl derivatives of sulphur. Part I. Trifluoromethanesulphonic acid". Journal of the Chemical Society. 1954: 4228–4232. doi:10.1039/JR9540004228.
  6. ↑ Dixon, N. E.; Lawrance, G. A.; Lay, P. A.; Sargeson, A. M.; Taube, H. (1990). "Trifluoromethanesulfonates and trifluoromethanesulfonato-O complexes". In Angelici, R. J. (ed.). Reagents for Transition Metal Complex and Organometallic Syntheses. Inorganic Syntheses. Vol. 28. pp. 70–76. doi:10.1002/9780470132593.ch16. ISBN 978-0-470-13259-3.
  7. ↑ "Trifluoromethanesulfonic acid MSDS". ChemCAS.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.