Infill materials

The earliest known type of infill, called opus craticum by the Romans, was a wattle and daub type construction.^[5] Opus craticum is now confusingly applied to a Roman stone/mortar infill as well. Similar methods to wattle and daub were also used and known by various names, such as clam staff and daub, cat-and-clay, or torchis (French), to name only three.

Wattle and daub was the most common infill in ancient times. The sticks were not always technically wattlework (woven), but also individual sticks installed vertically, horizontally, or at an angle into holes or grooves in the framing. The coating of daub has many recipes, but generally was a mixture of clay and chalk with a binder such as grass or straw and water or urine.^[6] When the manufacturing of bricks increased, brick infill replaced the less durable infills and became more common. Stone laid in mortar as an infill was used in areas where stone rubble and mortar were available.

Other infills include bousillage, fired brick, unfired brick such as adobe or mudbrick, stones sometimes called pierrotage, planks as in the German ständerbohlenbau, timbers as in ständerblockbau, or rarely cob without any wooden support.^[7] The wall surfaces on the interior were often "ceiled" with wainscoting and plastered for warmth and appearance.

Brick infill sometimes called nogging became the standard infill after the manufacturing of bricks made them more available and less expensive. Half-timbered walls may be covered by siding materials including plaster, weatherboarding, tiles, or slate shingles.^[8]

The infill may be covered by other materials, including weatherboarding or tiles.^[8] or left exposed. When left exposed, both the framing and infill were sometimes done in a decorative manner. Germany is famous for its decorative half-timbering and the figures sometimes have names and meanings. The decorative manner of half-timbering is promoted in Germany by the German Timber-Frame Road, several planned routes people can drive to see notable examples of Fachwerk buildings.

Gallery of infill types:

• 
  Decorative fired-brick infill with owl holes
• 
  Ordinary brick infill left exposed
• 
  Stone infill called opus incertum by the Romans
• 
  Some stone infill left visible
• 
  The wattle and daub was covered with a decorated layer of plaster.
• 
  Like wattle and daub, but with horizontal stakes
• 
  Here, the plaster infill itself is sculpted and decorated.
• 
  Top: wattle and daub, bottom: rubblestone

Gallery of some named figures and decorations:

• 
  Simple saltires or St. Andrews crosses in Germany
• 
  Two curved saltires also called St. Andrews crosses during repairs to a building in Germany: The infill has been removed.
• 
  Several forms of 'man' figures are found in Germany; this one is called a 'wild man'.
• 
  A figure called an Alemannic woman
• 
  Wild man (center), half-man (at the corners)
• 
  Relief carvings adorn some half-timbered buildings.
• 
  The foot braces are carved with sun discs (Sonnenscheiben), a typical design of the North-German Weser-Renaissance.

The collection of elements in half timbering are sometimes given specific names:

• 
  Upper German Fachwerk (from 1582/83 in Eppingen BW)
• 
  An example of Fachwerk in Franconia (Fränkisches Fachwerk). Image:I, Metzner
• 
  Fachwerk in Upper Franconia is very detailed.
• 
  Close studding is found in England, Spain and France.
• 
  Square-panel half-timbering with fired brick infill: Square paneling is typical of the Low German house, and is found in England.
• 
  Cruck framing can be built with half-timber walls. This house is in the Ryedale Folk Museum in England.

History of the term

According to Craven (2019),^[9] the term:

was used informally to mean timber-framed construction in the Middle Ages. For economy, cylindrical logs were cut in half, so one log could be used for two (or more) posts. The shaved side was traditionally on the exterior and everyone knew it to be half the timber.

The term half-timbering is not as old as the German name Fachwerk or the French name colombage, but it is the standard English name for this style. One of the first people to publish the term "half-timbered" was Mary Martha Sherwood (1775–1851), who employed it in her book, The Lady of the Manor, published in several volumes from 1823 to 1829. She uses the term picturesquely: "...passing through a gate in a quickset hedge, we arrived at the porch of an old half-timbered cottage, where an aged man and woman received us."^[10] By 1842, half-timbered had found its way into The Encyclopedia of Architecture by Joseph Gwilt (1784–1863). This juxtaposition of exposed timbered beams and infilled spaces created the distinctive "half-timbered", or occasionally termed, "Tudor" style, or "black-and-white".

Oldest examples

The most ancient known half-timbered building is called the House of opus craticum. It was buried by the eruption of Mount Vesuvius in 79 AD in Herculaneum, Italy. Opus craticum was mentioned by Vitruvius in his books on architecture as a timber frame with wattlework infill.^[11] However, the same term is used to describe timber frames with an infill of stone rubble laid in mortar the Romans called opus incertum.^[12]

Alternative meanings

A variation of the second meaning of half-timbered: the ground floor is log and the upper floor is framed (half-timbered in the first sense). Kluge House, Montana, U.S.

A less common meaning of the term "half-timbered" is found in the fourth edition of John Henry Parker's Classic Dictionary of Architecture (1873) which distinguishes full-timbered houses from half-timbered, with half-timber houses having a ground floor in stone^[13] or logs such as the Kluge House which was a log cabin with a timber-framed second floor.

Jetties

A jetty is an upper floor which sometimes historically used a structural horizontal beam, supported on cantilevers, called a bressummer or 'jetty bressummer' to bear the weight of the new wall, projecting outward from the preceding floor or storey.

In the city of York in the United Kingdom, the famous street known as The Shambles exemplifies this, where jettied houses seem to almost touch above the street.

Timbers

The completed frame of a modern timber-frame house

Ridge-post framing (left) and story framing (right, with jetties)

Historically, the timbers would have been hewn square using a felling axe and then surface-finished with a broadaxe. If required, smaller timbers were ripsawn from the hewn baulks using pitsaws or frame saws. Today, timbers are more commonly bandsawn, and the timbers may sometimes be machine-planed on all four sides.

The vertical timbers include:

• posts (main supports at corners and other major uprights),
• wall studs (subsidiary upright limbs in framed walls), for example, close studding.

The horizontal timbers include:

• sill-beams (also called ground-sills or sole-pieces, at the bottom of a wall into which posts and studs are fitted using tenons),
• noggin-pieces (the horizontal timbers forming the tops and bottoms of the frames of infill panels),
• wall-plates (at the top of timber-framed walls that support the trusses and joists of the roof).

When jettying, horizontal elements can include:

• The jetty bressummer (or breastsummer), where the main sill (horizontal piece) on which the projecting wall above rests, stretches across the whole width of the jetty wall. The bressummer is itself cantilevered forward, beyond the wall below it.
• The dragon-beam which runs diagonally from one corner to another, and supports the corner posts above and supported by the corner posts below
• The jetty beams or joists conform t floor dimensions above, but are at right angles to the jetty-plates that conform to the shorter dimensions of "roof" of the floor below. Jetty beams are mortised at 45° into the sides of the dragon beams. They are the main constituents of the cantilever system, and determine how far the jetty projects.
• The jetty-plates are designed to carry the jetty beams. The jetty plates themselves are supported by the corner posts of the recessed floor below.

The sloping timbers include:

• Trusses (the slanting timbers forming the triangular framework at gables and roof)
• Braces (slanting beams giving extra support between horizontal or vertical members of the timber frame)
• Herringbone bracing (a decorative and supporting style of frame, usually at 45° to the upright and horizontal directions of the frame)

Post construction and frame construction

There were two different systems of the position of posts and studs:

• In the older manner, called post construction, the vertical elements continue from the groundwork to the roof. This post construction in German is called Geschossbauweise or Ständerbauweise. It is somewhat similar to balloon framing method common in North America until the middle of the 20th century.
• In the advanced manner, called frame construction, each story is constructed like a case, and the whole building is constructed like a pile of such cases. This frame construction in German is called Rähmbauweise or Stockwerksbauweise.

Ridge-post framing is a structurally simple and ancient post and lintel framing where the posts extend all the way to the ridge beams. Germans call this Firstsäule or Hochstud.

Modern timber connector method (1930s–1950s)

Typical lapped joint assemblies of split-ring connectors

In the 1930s a system of timber framing referred to as the "modern timber connector method"^[15] was developed. It was characterized by the use of timber members assembled into trusses and other framing systems and fastened using various types of metal timber connectors. This type of timber construction was used for various building types including warehouses, factories, garages, barns, stores/markets, recreational buildings, barracks, bridges, and trestles.^[16] The use of these structures was promoted because of their low construction costs, easy adaptability, and performance in fire as compared to unprotected steel truss construction.

During World War II, the United States Army Corps of Engineers and the Canadian Military Engineers undertook to construct airplane hangars using this timber construction system in order to conserve steel. Wood hangars were constructed throughout North America and employed various technologies including bowstring, Warren, and Pratt trusses, glued laminated arches, and lamella roof systems. Unique to this building type is the interlocking of the timber members of the roof trusses and supporting columns and their connection points. The timber members are held apart by "fillers" (blocks of timber). This leaves air spaces between the timber members which improves air circulation and drying around the members which improves resistance to moisture borne decay.

Shear plate timber connector

Timber members in this type of framing system were connected with ferrous timber connectors of various types. Loads between timber members were transmitted using split-rings (larger loads), toothed rings (lighter loads), or spiked grid connectors.^[17] Split-ring connectors were metal rings sandwiched between adjacent timber members to connect them together. The rings were fit into circular grooves on in both timber members then the assembly was held together with through-bolts. The through-bolts only held the assembly together but were not load-carrying.^[16] Shear plate connectors were used to transfer loads between timber members and metal. Shear plate connectors resembled large washers, deformed on the side facing the timber in order to grip it, and were through-fastened with long bolts or lengths of threaded rod. A leading manufacturer of these types of timber connectors was the Timber Engineering Company, or TECO, of Washington, DC. The proprietary name of their split-ring connectors was the "TECO Wedge-Fit".

Modern features

Porch of a modern timber-framed house

A modern prefabricated building made by Huf Haus, often sold as "Fachwerk", near West Linton, Scotland

Timber-framed structures differ from conventional wood-framed buildings in several ways. Timber framing uses fewer, larger wooden members, commonly timbers in the range of 15 to 30 cm (6 to 12 in), while common wood framing uses many more timbers with dimensions usually in the 5- to 25-cm (2- to 10-in) range. The methods of fastening the frame members also differ. In conventional framing, the members are joined using nails or other mechanical fasteners, whereas timber framing uses the traditional mortise and tenon or more complex joints that are usually fastened using only wooden pegs. Modern complex structures and timber trusses often incorporate steel joinery such as gusset plates, for both structural and architectural purposes.

Recently, it has become common practice to enclose the timber structure entirely in manufactured panels such as structural insulated panels (SIPs). Although the timbers can only be seen from inside the building when so enclosed, construction is less complex and insulation is greater than in traditional timber building. SIPs are "an insulating foam core sandwiched between two structural facings, typically oriented strand board" according to the Structural Insulated Panel Association.^[18] SIPs reduce dependency on bracing and auxiliary members, because the panels span considerable distances and add rigidity to the basic timber frame.

An alternate construction method is with concrete flooring with extensive use of glass. This allows a very solid construction combined with open architecture. Some firms have specialized in industrial prefabrication of such residential and light commercial structures such as Huf Haus as low-energy houses or – dependent on location – zero-energy buildings.

Straw-bale construction is another alternative where straw bales are stacked for nonload-bearing infill with various finishes applied to the interior and exterior such as stucco and plaster. This appeals to the traditionalist and the environmentalist as this is using "found" materials to build.

Mudbricks also called adobe are sometimes used to fill in timber-frame structures. They can be made on site and offer exceptional fire resistance. Such buildings must be designed to accommodate the poor thermal insulating properties of mudbrick, however, and usually have deep eaves or a veranda on four sides for weather protection.

Engineered structures

Timber design or wood design is a subcategory of structural engineering that focuses on the engineering of wood structures. Timber is classified by tree species (e.g., southern pine, douglas fir, etc.) and its strength is graded using numerous coefficients that correspond to the number of knots, the moisture content, the temperature, the grain direction, the number of holes, and other factors. There are design specifications for sawn lumber, glulam members, prefabricated I-joists, composite lumber, and various connection types. In the United States, structural frames are then designed according to the Allowable Stress Design method or the Load Reduced Factor Design method (the latter being preferred).^[19]

Topping out ceremony

The topping out ceremony is a builders' rite, an ancient tradition thought to have originated in Scandinavia by 700 AD.^[21] In the U.S., a bough or small tree is attached to the peak of the timber frame after the frame is complete as a celebration. Historically, it was common for the master carpenter to give a speech, make a toast, and then break the glass. In Northern Europe, a wreath made for the occasion is more commonly used rather than a bough. In Japan, the "ridge raising" is a religious ceremony called the jotoshiki.^[22] In Germany, it is called the Richtfest.

Carpenters' marks

Wikimedia Commons has media related to Carpenters marks.

Carpenters' marks are markings left on the timbers of wooden buildings during construction.

• Assembly or marriage marks were used to identify the individual timbers. Assembly marks include numbering to identify the pieces of the frame. The numbering can be similar to Roman numerals except the number four is IIII and nine is VIIII. These marks are chiseled, cut with a race knife (a tool to cut lines and circles in wood), or saw cuts. The numbering can also be in Arabic numerals which are often written with a red grease pencil or crayon. German and French carpenters made some unique marks. (Abbundzeichen (German assembly marks)).
• Layout marks left over from marking out identify the place where to cut joints and bore peg holes; carpenters also marked the location on a timber where they had levelled it, as part of the building process, and called these "level lines"; sometimes they made a mark two feet from a critical location, which was then called the "two-foot mark". These marks are typically scratched on the timber with an awl-like tool until later in the 19th century, when they started using pencils.
• Occasionally, carpenters or owners marked a date and/or their initials in the wood, but not like masons left masons' marks.
• Boards on the building may have "tally marks" cut into them which were numbers used to keep track of quantities of lumber (timber).
• Other markings in old buildings are called "ritual marks", which were often signs the occupants felt would protect them from harm.

Tools

German carpenters in 1880: The tools, from left to right, are: a cart loaded with timbers, rough hewing with felling axes; in the green coat is the master carpenter carrying his tools including a frame saw; on the ground, a ring dog (precursor to the cant dog and peavey); in the background sawyers pit sawing on trestles; on right carpenters striking a mortising chisel with a mallet and boring a hole with a T-auger; lower right on ground a two-man crosscut saw, steel square, broadaxe, and (hard to see) a froe.

Many historic hand tools used by timber framers for thousands of years have similarities, but vary in shape. Electrically powered tools first became available in the 1920s in the U.S. and continue to evolve. See the list of timber framing tools for basic descriptions and images of unusual tools (The list is incomplete at this time).

British tradition

The timber-framed Staple Inn in Holborn, London

Some of the earliest known timber houses in Europe have been found in Great Britain, dating to Neolithic times; Balbridie and Fengate are some of the rare examples of these constructions.

Molded plaster ornamentation, pargetting^[23] further enriched some English Tudor architecture houses. Half-timbering is characteristic of English vernacular architecture in East Anglia,^[24] Warwickshire,^[25][26] Worcestershire,^[27] Herefordshire,^[28][29] Shropshire,^[30][31] and Cheshire,^[32] where one of the most elaborate surviving English examples of half-timbered construction is Little Moreton Hall.^[33]

In South Yorkshire, the oldest timber house in Sheffield, the "Bishops' House" (c. 1500), shows traditional half-timbered construction.

In the Weald of Kent and Sussex,^[34] the half-timbered structure of the Wealden hall house,^[35] consisted of an open hall with bays on either side and often jettied upper floors.

Half-timbered construction traveled with British colonists to North America in the early 17th century but was soon abandoned in New England and the mid-Atlantic colonies for clapboard facings (an East Anglia tradition). The original English colonial settlements, such as Plymouth, Massachusetts and Jamestown, Virginia had timber-framed buildings, rather than the log cabins often associated with the American frontier. Living history programs demonstrating the building technique are available at both these locations.

• 
  Farmhouse in Wormshill, Kent, England
• 
  Historic timber-framed houses in Warwick, England
• 
  Intersection of Shambles and Little Shambles streets, York, England
• 
  Bessie Surtees House, Quayside, Newcastle upon Tyne, England
• 
  The President's Lodge, Queens' College, Cambridge, England
• 
  The south range of Little Moreton Hall, Cheshire, England
• 
  The Yeoman's House, Bignor, West Sussex, England, a three-bay Wealden hall house
• 
  The Crooked House, Lavenham, Suffolk, England

One of the surviving streets lined with almost-touching houses is known as The Shambles, York, and is a very popular tourist attraction.

English styles

For Timber-framed houses in Wales see: Architecture of Wales

Historic timber-frame construction in England (and the rest of the United Kingdom) showed regional variation^[36] which has been divided into the "eastern school", the "western school", and the "northern school", although the characteristic types of framing in these schools can be found in the other regions (except the northern school).^[37] A characteristic of the eastern school is close studding which is a half-timbering style of many studs spaced about the width of the studs apart (for example six-inch studs spaced six inches apart) until the middle of the 16th century and sometimes wider spacing after that time. Close studding was an elite style found mostly on expensive buildings. A principal style of the western school is the use of square panels of roughly equal size and decorative framing utilizing many shapes such as lozenges, stars, crosses, quatrefoils, cusps, and many other shapes.^[37] The northern school sometimes used posts which landed on the foundation rather than on a sill beam, the sill joining to the sides of the posts and called an interrupted sill. Another northern style was to use close studding but in a herring-bone or chevron pattern.^[37]

Roof structure of the Barley Barn, Cressing Temple, Essex

As houses were modified to cope with changing demands there sometimes were a combination of styles within a single timber-frame construction.^[38] The major types of historic framing in England are 'cruck frame',^[38] box frame,^[38] and aisled construction. From the box frame, more complex framed buildings such as the Wealden House and Jettied house developed.

The cruck frame design is among the earliest, and was^[38] in use by the early 13th century, with its use continuing to the present day, although rarely after the 18th century.^[38] Since the 18th century however, many existing cruck structures have been modified, with the original cruck framework becoming hidden. Aisled barns are of two or three aisled types, the oldest surviving aisled barn being the barley barn at Cressing Temple^[37] dated to 1205–1235.^[39]

Jettying was introduced in the 13th century and continued to be used through the 16th century.^[37]

Generally speaking, the size of timbers used in construction, and the quality of the workmanship reflect the wealth and status of their owners. Small cottages often used quite small cross-section timbers which would have been deemed unsuitable by others. Some of these small cottages also have a very 'home-made' – even temporary – appearance. Many such example can be found in the English shires. Equally, some relatively small buildings can be seen to incorporate substantial timbers and excellent craftsmanship, reflecting the relative wealth and status of their original owners. Important resources for the study of historic building methods in the UK are open-air museums.

It is often claimed that timber-framed buildings in Britain contain reused ships' timbers. This belief is dismissed by experts, who point out that curved timbers are rarely suitable, that salt is destructive to cellulose in the wood, and that ships' timbers are generally slight compared to cruck trusses.^[40]

French tradition

Coupesarte Manor (Normandy, France)

Elaborately half-timbered houses of the 13th through 18th centuries still remain in Bourges, Tours, Troyes, Rouen, Thiers, Dinan, Rennes, and many other cities, except in Provence and Corsica. Timber framing in French is known colloquially as pan de bois and half-timbering as colombage. Alsace is the region with the most timbered houses in France.

The Normandy tradition features two techniques: frameworks were built of four evenly spaced regularly hewn timbers set into the ground (poteau en terre) or into a continuous wooden sill (poteau de sole) and mortised at the top into the plate. The openings were filled with many materials including mud and straw, wattle and daub, or horsehair and gypsum.^[41]

• 
  Half-timbered houses in Tours (Centre, France)
• 
  Old houses in Troyes (Champagne, France)
• 
  Half-timbered houses in Châlons-en-Champagne (Champagne, France)
• 
  Church of Drosnay (Champagne, France)
• 
  Old houses in Rennes (Brittany, France)
• 
  14th-century early corbelled house, Rouen (Normandy, France)
• 
  15th-century manor, Saint-Sulpice-de-Grimbouville, (Normandy, France)
• 
  16th-century house in Albi, (Occitanie, France)
• 
  Framing of the roof, Notre-Dame, Paris. Illustration by Eugène Viollet-le-Duc
• 
  Trinity Church of Langonnet (Brittany, France)

German tradition (Fachwerkhäuser)

Wikimedia Commons has media related to Timber framing in Germany.

Germany has several styles of timber framing, but probably the greatest number of half-timbered buildings in the world are to be found in Germany and in Alsace (France). There are many small towns which escaped both war damage and modernisation and consist mainly, or even entirely, of half-timbered houses.

Idstein, Hesse, on the German Timber-Frame Road

The Spitzhäuschen, a very narrow, timber-frame house in Bernkastel at the river Moselle, built in 1417

The German Timber-Frame Road (Deutsche Fachwerkstraße) is a tourist route that connects towns with remarkable fachwerk. It is more than 2,000 km (1,200 mi) long, crossing Germany through the states of Lower Saxony, Saxony-Anhalt, Hesse, Thuringia, Bavaria, and Baden-Württemberg.^[14][42]

Some of the more prominent towns (among many) include: Quedlinburg, a UNESCO-listed town, which has over 1200 half-timbered houses spanning five centuries; Goslar, another UNESCO-listed town; Hanau-Steinheim (home of the Brothers Grimm); Bad Urach; Eppingen ("Romance city" with a half-timbered church dating from 1320); Mosbach; Vaihingen an der Enz and nearby UNESCO-listed Maulbronn Abbey; Schorndorf (birthplace of Gottlieb Daimler); Calw; Celle; and Biberach an der Riß with both the largest medieval complex, the Holy Spirit Hospital and one of Southern Germany's oldest buildings, now the Braith-Mali-Museum, dated to 1318.

German fachwerk building styles are extremely varied with a huge number of carpentry techniques which are highly regionalized. German planning laws for the preservation of buildings and regional architecture preservation dictate that a half-timbered house must be authentic to regional or even city-specific designs before being accepted.^[43][44]

A brief overview of styles follows, as a full inclusion of all styles is impossible.

In general the northern states have fachwerk very similar to that of the nearby Netherlands and England while the more southerly states (most notably Bavaria and Switzerland) have more decoration using timber because of greater forest reserves in those areas. During the 19th century, a form of decorative timber-framing called bundwerk became popular in Bavaria, Austria and South Tyrol.

The German fachwerkhaus usually has a foundation of stone, or sometimes brick, perhaps up to several feet (a couple of metres) high, which the timber framework is mortised into or, more rarely, supports an irregular wooden sill.

The three main forms may be divided geographically:

• West Central Germany and Franconia:
  • In West Central German and Franconian timber-work houses (particularly in the Central Rhine and Moselle): the windows most commonly lie between the rails of the sills and lintels.
• Northern Germany, Central Germany and East German:
  • In Saxony and around the Harz foothills, angle braces often form fully extended triangles.
  • Lower Saxon houses have a joist for every post.
  • Holstein fachwerk houses are famed for their massive 12-inch (30 cm) beams.
• Southern Germany including the Black and Bohemian Forests
  • In Swabia, Württemberg, Alsace, and Switzerland, the use of the lap-joint is thought to be the earliest method of connecting the wall plates and tie beams and is particularly identified with Swabia. A later innovation (also pioneered in Swabia) was the use of tenons – builders left timbers to season which were held in place by wooden pegs (i.e., tenons). The timbers were initially placed with the tenons left an inch or two out of intended position and later driven home after becoming fully seasoned.

The most characteristic feature is the spacing between the posts and the high placement of windows. Panels are enclosed by a sill, posts, and a plate, and are crossed by two rails between which the windows are placed—like "two eyes peering out".^[43][44]

In addition there is a myriad of regional scrollwork and fretwork designs of the non-loadbearing large timbers (braces) peculiar to particularly wealthy towns or cities.

A unique type of timber-frame house can be found in the region where the borders of Germany, the Czech Republic, and Poland meet – it is called the Upper Lusatian house (Umgebindehaus, translates as round-framed house). This type has a timber frame surrounding a log structure on part of the ground floor.

• 
  Ständerbau in Quedlinburg (Germany), Wordgasse 3, built in 1346; in the past suggested as the oldest timber-frame house in Germany; nowadays 3 older houses are known only in Quedlinburg.
• 
  Timber frame town hall of Wernigerode
• 
  House in Rothenburg (Bavaria)
• 
  The Plönlein (i.e. little place), the worldwide known timber frame ensemble, as the southern end of the Old town in Rothenburg
• 
  Buildings in Hornburg
• 
  Buildings in Braubach, 16th century first half
• 
  House in Schwerin, built in 1698
• 
  Gelbensande Castle, a hunting lodge built in 1887 near Rostock
• 
  The half-timbered houses in Dinkelsbühl mostly have plastered and painted facades.
• 
  An Umgebindehaus in Oybin (Saxony). The timber frame is outside a log wall on the ground floor.
• 
  20th-century timber framing in Ribnitz (Mecklenburg)
• 
  Fachwerk (timber framing) under construction in 2013, Tirschenreuth
• 
  Half-timbered mansion of the former Zirkelmühle in Mellenbach-Glasbach (Thuringia)

Italy

Several half-timbered houses can be found in Northern Italy, especially in Piedmont, Lombardy, in the city of Bologna, in Sardinia in the Barbagia region and in the Iglesiente mining region.

• 
  Half-timbered house in Ozzano Monferrato, Piedmont
• 
  Half-timbered house in Biella, Piedmont
• 
  Half-timbered house in Arquata Scrivia, Piedmont
• 
  Half-timbered house in Monza, Lombardy
• 
  Half-timbered house in Susa, Piedmont
• 
  A very rare example of a half-timbered house in Central Italy, in Spoleto, Umbria

Poland

Timber-frame house in central Poznań, Poland

The Churches of Peace in southwestern Poland are the largest religious timberframed structures in Europe.

Historically, the majority of Polish cities as well as their central marketplaces possessed timber-framed dwellings and housing.^[45] Throughout the Middle Ages it was customary in Poland to use either bare brick or wattle and daub (Polish: szachulec) as filling in-between the timber frame.^[45] However, the half-timbered houses which can be observed nowadays have been built in regions that were historically German or had significant German cultural influence. As these regions were at some point parts of German Prussia, half-timbered walls are often called mur pruski (lit. Prussian wall) in Polish. A distinctive type of house associated with mostly Mennonite immigrant groups from Frisia and the Netherlands, known as the Olędrzy, is called an "arcade house" (dom podcieniowy). The biggest timber-framed religious buildings in Europe are the Churches of Peace in southwestern Poland.^[46] There are also numerous examples of timber-framed secular structures such as the granaries in Bydgoszcz.

The Umgebindehaus rural housing tradition of south Saxony (Germany) is also found in the neighboring areas of Poland, particularly in the Silesian region.

Another world-class type of wooden building Poland shares with some neighboring countries are its wooden church buildings.

• 
  Timber frame architecture, Mill Island, Bydgoszcz
• 
  Wheelwright croft in Zgorzelec
• 
  Antoniów, Lower Silesian Voivodeship
• 
  Granary in Bydgoszcz, built in 1795 upon 15th-century gothic cellar
• 
  Sts. Peter & Paul Church in Sułów
• 
  Trutnowy Mennonite arcade house
• 
  19th-century timber frame manor house in Toruń

Spain

The Spanish generally follow the Mediterranean forms of architecture with stone walls and shallow roof pitch. Timber framing is often of the post and lintel style. Castile and León, par example La Alberca, and the Basque Country have the most representative examples of the use of timber framing in the Iberian Peninsula.

Most traditional Basque buildings with half-timbering elements are detached farm houses (in Basque: baserriak). Their upper floors were built with jettied box frames in close studding. In the oldest farmsteads and, if existing, in the third floor the walls were sometimes covered with vertical weatherboards. Big holes were left in the gable of the main façade for ventilation. The wooden beams were painted over, mostly in dark red. The vacancies were filled in with wattle and daub or rubble laid in a clay mortar and then plastered over with white chalk or nogged with bricks. Although the entire supporting structure is made of wood, the timbering is only visible on the main façade, which is generally oriented to the southeast.

Although the typical Basque house is now mostly associated with half-timbering, the outer walls and the fire-walls were built in masonry (rubble stone, bricks or, ideally, ashlars) whenever it could be afforded. Timber was a sign of poverty. Oak-wood was cheaper than masonry: that is why, when the money was running out, the upper floor walls were mostly built timbered. Extant baserriak with half-timbered upper-floor façades were built from the 15th to 19th centuries and are found in all Basque regions with oceanic climate, except in Zuberoa (Soule), but are concentrated in Lapurdi (Labourd).

Some medieval Basque tower houses (Dorretxe) feature an overhanged upper floor in half-timbering.

To a lesser extent timbered houses are also found in villages and towns as row houses, as the photo from the Uztaritz village shows.

Currently, it has again become popular to build Néobasque houses resembling old Basque farmsteads, with more or less respect for the principles of traditional half-timbered building.

• 
  Inharri baserri in Ibarron (Lapurdi)
• 
  Aranguren dorretxea (Orozko, Bizkaia)
• 
  Half-timbered houses from Uztarritz (Lapurdi)
• 
  Timbered house from Guadilla de Villamar (Spain). Popular style.

Switzerland

An exceptional fachwerk house called Eglihaus in Hombrechtikon, Switzerland

Switzerland has many styles of timber framing which overlap with its neighboring countries.

Belgium

Nowadays, timber framing is primarily found in the provinces of Limburg, Liège, and Luxembourg. In urban areas, the ground floor was formerly built in stone and the upper floors in timber framing. Also, as timber framing was seen as a cheaper way of building, often the visible structures of noble houses were in stone and bricks, and the invisible or lateral walls in timber framing. The open-air museums of Bokrijk and Saint-Hubert (Fourneau Saint-Michel) show many examples of Belgian timber framing. Many post-and-beam houses can be found in cities and villages, but, unlike France, the United Kingdom, and Germany, there are few fully timber framed cityscapes.

• 
  The house where André Grétry was born in Liège
• 
  The Sugny House (18th century), in the Fourneau Saint-Michel Museum
• 
  A House in Theux (17th century)
• 
  The former water mill of Lierneux
• 
  Small "chapel" (shrine) at the Bokrijk Open Air Museum
• 
  Unskilled worker's thatched cottage (Hingeon 19th century) transplanted and reconstituted in the open-air museum Fourneau Saint-Michel
• 
  Timber-frame structure in Bruges

Denmark

Timber frame (bindingsværk, literally "binding work") is the traditional building style in almost all of Denmark, making it the only Nordic country where this style is prevalent in all regions. Along the west coast of Jutland, houses built entirely of bricks were traditionally more common due to lack of suitable wood. In the 19th and especially in the 20th century, bricks have been the preferred building material in all of Denmark, but traditional timber-frame houses remain common both in the towns and in the countryside. Different regions have different traditions as to whether the timber frame should be tarred and thus clearly visible or be limewashed or painted in the same colour as the infills.

Sweden

The Swedish mostly built log houses but they do have traditions of several types of timber framing: Some of the following links are written in Swedish. Most of the half-timbered houses in Sweden were built during the Danish time and are located in what until 1658 used to be Danish territory in southern Sweden, primarily in the province Skåne and secondarily in Blekinge and Halland. In Swedish half-timber is known as korsvirke.

• Stave construction is called stavverk. Scandinavia is famous for its ancient stave churches. Stave construction is a traditional timber frame with walls of vertical planks, the posts and planks landing in a sill on a foundation. Similar construction with earthfast posts is called stolpteknik. and Palisade construction where many vertical wall timbers or planks have their feet buried in the ground called post in ground or earthfast construction is called palissadteknik. (see also Palisade church)
• Swedish plank-frame construction is called skiftesverk. This is a traditional timber frame with walls of horizontal planks.

Norway

Norway has at least two significant types of timber-framed structures: the stave church and Grindverk. The term stave (a post or pole) indicates that a stave church essentially means a framed church, a distinction made in a region where log building is common. All but one surviving stave churches are in Norway, one in Sweden. Replicas of stave churches and other Norwegian building types have been reproduced elsewhere, e.g. at the Scandinavian Heritage Park in North Dakota, United States.

Grindverk translates as trestle construction, consisting of a series of transversal frames of two posts and a connecting beam, supporting two parallel wall plates bearing the rafters. Unlike other types of timber framing in Europe, the trestle frame construction uses no mortise and tenon joints. Archaeological excavations have uncovered similar wooden joints from more than 3,000 years ago, suggesting that this type of framing is an ancient unbroken tradition. Grindverk buildings are only found on part of the western coast of Norway, and most of them are boathouses and barns.

Log building was the common construction used for housing humans and livestock in Norway from the middle ages until the 18th century. Timber framing of the type used in large parts of Europe appeared occasionally in late medieval towns, but never became common, except for the capital Christiania. After a fire in 1624 in Oslo, King Christian IV ordered the town to be relocated to a new site. He outlawed log building to prevent future conflagrations and required wealthy burghers to use brickwork and the less affluent to use timber framing in the Danish manner. During the next two centuries, 50 per cent of the houses were timber framed.

All of these buildings disappeared as a consequence of this small provincial town of Christiania becoming the capital of independent Norway in 1814. This caused a rapid growth, with the population rising from 10 000 to 250 000 by 1900. Increasing prices caused a massive urban renewal, which resulted in all wooden structures being replaced with office blocks.

• 
  Borgund stave church in Lærdal, Sogn og Fjordane country, Norway
• 
  Garmo Stave Church detail. Note how the sills lap and the post fits around the sills. The post is the stave from which these buildings are named.
• 
  Kaupanger stave church interior, Kaupanger, Norway
• 
  An example of grindverk framing. The tie beams are captured in slots in the post tops.
• 
  Frogner Manor in Oslo, timber-framed building 1750, extended 1790
• 
  Brugata 14, Oslo. Timber-framed building from around 1800.

Netherlands

A half timbered building without the infill in Limburg, Netherlands

The Netherlands is often overlooked for its timbered houses, yet many exist, including windmills. It was in North Holland where the import of cheaper timber, combined with the Dutch innovation of windmill-powered sawmills, allowed economically viable widespread use of protective wood covering over framework. In the late 17th century the Dutch introduced vertical cladding also known in Eastern England as clasp board and in western England as weatherboard, then as more wood was available more cheaply, horizontal cladding in the 17th century. Perhaps owing to economic considerations, vertical cladding returned to fashion.^[47] Dutch wall framing is virtually always built in bents and the three basic types of roof framing are the rafter roof, purlin roof, and ridge-post roof.^[48]

Romania

Half-timbered houses can be found in Romania mostly in areas once inhabited by Transylvanian Saxons, in cities, towns and villages with Germanic influence such as Bistrița, Brașov, Mediaș, Sibiu and Sighișoara. However the number of half-timbered houses is very small. In Wallachia there are few examples of this type of architecture, most of those buildings being located in Sinaia, such as the Peleș Castle.

• 
  The Pelișor Castle in Sinaia
• 
  Peleș Castle
• 
  "Olimpia" Sports Complex, Brașov
• 
  A half-timbered building in Sinaia

Baltic states

As the result of centuries of German settlement and cultural influence, towns in the Baltic states such as Klaipėda and Riga also preserve German-style Fachwerkhäuser.

Americas

Most "haft-timbered" houses existing in Missouri, Pennsylvania, and Texas were built by German settlers.^[41] Old Salem North Carolina has fine examples of German fachwerk buildings.^{[49]: 42–43} Many are still present in Colonia Tovar (Venezuela), Santa Catarina and Rio Grande do Sul (Brazil), where Germans settled. Later, they chose more suitable building materials for local conditions (most likely because of the great problem of tropical termites.)

Japanese

Wall framing of a Japanese house under construction

Japanese timber framing is believed to be descended from Chinese framing (see Ancient Chinese wooden architecture). Asian framing is significantly different from western framing, with its predominant use of post and lintel framing and an almost complete lack of diagonal bracing.

Revival styles in later centuries

The Saitta House, Dyker Heights, Brooklyn, New York, built in 1899 has half-timber decoration.^[53]

The Old Mill Hotel, Klaipėda, built in 2008 has glass curtain wall combined half-timber framing.^[54]

When half-timbering regained popularity in Britain after 1860 in the various revival styles, such as the Queen Anne style houses by Richard Norman Shaw and others, it was often used to evoke a "Tudor" atmosphere (see Tudorbethan), though in Tudor times half-timbering had begun to look rustic and was increasingly limited to village houses (illustration, above left).

In 1912, Allen W. Jackson published The Half-Timber House: Its Origin, Design, Modern Plan, and Construction, and rambling half-timbered beach houses appeared on dune-front properties in Rhode Island or under palm-lined drives of Beverly Hills. During the 1920s increasingly minimal gestures towards some half-timbering in commercial speculative housebuilding saw the fashion diminish.

In the revival styles, such as Tudorbethan (Mock Tudor), the half-timbered appearance is superimposed on the brickwork or other material as an outside decorative façade rather than forming the main frame that supports the structure.

The style was used in many of the homes built in Lake Mohawk, New Jersey, as well as all of the clubhouse, shops, and marina.

For information about "roundwood framing" see the book Roundwood Timber Framing: Building Naturally Using Local Resources by Ben Law (East Meon, Hampshire: Permanent Publications; 2010. ISBN 1856230414)

Traditional or historic structures

In terms of the traditional half-timber or fachwerkhaus there are maybe more disadvantages than advantages today. Such houses are notoriously expensive to maintain let alone renovate and restore, most commonly owing to local regulations that do not allow divergence from the original, modification or incorporation of modern materials. Additionally, in such nations as Germany, where energy efficiency is highly regulated, the renovated building may be required to meet modern energy efficiencies, if it is to be used as a residential or commercial structure (museums and significant historic buildings have no semi-permanent habitade exempt). Many framework houses of significance are treated merely to preserve, rather than render inhabitable – most especially as the required heavy insecticidal fumigation is highly poisonous.

In some cases, it is more economical to build anew using authentic techniques and correct period materials than restore. One major problem with older structures is the phenomenon known as mechano-sorptive creep or slanting: where wood beams absorb moisture whilst under compression or tension strains and deform, shift position or both. This is a major structural issue as the house may deviate several degrees from perpendicular to its foundations (in the x-axis, y-axis, and even z-axis) and thus be unsafe and unstable or so out of square it is extremely costly to remedy.^[57]

A summary of problems with Fachwerkhäuser or half-timbered houses includes the following, though many can be avoided by thoughtful design and application of suitable paints and surface treatments and routine maintenance. Often, though when dealing with a structure of a century or more old, it is too late.^[47]

• "slanting"- thermo-mechanical (weather-seasonally induced) and mechano-sorptive (moisture induced) creep of wood in tension and compression.^[57]
• poor prevention of capillary movement of water within any exposed timber, leading to afore-described creep, or rot
• eaves that are too narrow or non-existent (thus allowing total exposure to rain and snow)
• too much exterior detailing that does not allow adequate rainwater run-off
• timber ends, joints, and corners poorly protected through coatings, shape or position
• non-beveled vertical beams (posts and clapboards) allow water absorption and retention through capillary action.
• surface point or coatings allowed to deteriorate
• traditional gypsum, or wattle and daub containing organic materials (animal hair, straw, manure) which then decompose.
• in both poteaux-en-terre and poteaux-sur-sol, insect, fungus or bacterial decomposition.
• rot including dry rot.
• infestation of xylophagous pest organisms such as (very common in Europe) the Ptinidae family, particularly the common furniture beetle, termites, cockroaches, powderpost beetles, mice, and rats (quite famously so in many children's stories).
• Noise from footsteps in adjacent rooms above, below, and on the same floor in such buildings can be quite audible. This is often resolved with built-up floor systems involving clever sound-isolation and absorption techniques and at the same time providing passage space for plumbing, wiring, and even heating and cooling equipment.
• Other fungi that are non-destructive to the wood but are harmful to humans, such as black mold. These fungi may also thrive on many "modern" building materials.
• Wood burns more readily than some other materials, making timber-frame buildings somewhat more susceptible to fire damage, although this idea is not universally accepted: Since the cross-sectional dimensions of many structural members exceed 15 cm × 15 cm (6" × 6"), timber-frame structures benefit from the unique properties of large timbers, which char on the outside, forming an insulated layer that protects the rest of the beam from burning.^[58][59]
• prior flood or soil subsidence damage