Suspension plasma spray

In materials engineering, suspension plasma spray (SPS) is a form of plasma spraying where the ceramic feedstock is dispersed in a liquid suspension before being injected into the plasma jet.^[1]^[2]

By suspending powder in a fluid, normal feeding problems are circumvented, allowing the deposition of finer microstructures through the use of finer powders.

References

↑ Fauchais, P.; Rat, V.; Delbos, C.; Coudert, J.F.; Chartier, T.; Bianchi, L. (2005). "Understanding of suspension DC plasma spraying of finely structured coatings for SOFC". IEEE Transactions on Plasma Science. 33 (2): 920–930. Bibcode:2005ITPS...33..920F. doi:10.1109/TPS.2005.845094. ISSN 0093-3813.
↑ Pierre L. Fauchais; Joachim V.R. Heberlein; Maher I. Boulos (24 January 2014). Thermal Spray Fundamentals: From Powder to Part. Springer Science & Business Media. pp. 564–. ISBN 978-0-387-68991-3.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[FauchaisRat2005-1] Fauchais, P.; Rat, V.; Delbos, C.; Coudert, J.F.; Chartier, T.; Bianchi, L. (2005). "Understanding of suspension DC plasma spraying of finely structured coatings for SOFC". IEEE Transactions on Plasma Science. 33 (2): 920–930. Bibcode:2005ITPS...33..920F. doi:10.1109/TPS.2005.845094. ISSN 0093-3813.

[FauchaisHeberlein2014-2] Pierre L. Fauchais; Joachim V.R. Heberlein; Maher I. Boulos (24 January 2014). Thermal Spray Fundamentals: From Powder to Part. Springer Science & Business Media. pp. 564–. ISBN 978-0-387-68991-3.

[1]

[2]