SCSI target devices provide a number of SCSI log pages. These can be interrogated by a Log Sense command and in some cases can be set by a Log Select command. The Log Sense and Log Select commands include a 6-bit address field, allowing for 64 possible log pages. There is a standard map of log page addresses below. Note that any given SCSI device type will only support a subset of these log pages.

  • 00h - supported log pages
  • 01h - buffer over-run/under-run
  • 02h - error counter (write)
  • 03h - error counter (read)
  • 04h - error counter (read reverse)
  • 05h - error counter (verify)
  • 06h - non-medium error
  • 07h - last n error events
  • 08h-2Fh - reserved
  • 30h-3Eh - vendor-specific
  • 3Fh - reserved


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.