A US Navy aviator uses a pair of helmet-mounted AN/AVS-6 vision goggles. The effect on the natural night vision of the eye is evident
A standard telescopic sight augmented with a night-vision device in front on the M110. Note that in addition to the image intensifier, the NVD gathers much more light by its much larger aperture
A 1PN51-2 night-vision reticle with markings for range estimation

A night-vision device (NVD), also known as a night optical/observation device (NOD) or night-vision goggle (NVG), is an optoelectronic device that allows visualization of images in low levels of light, improving the user's night vision. The device enhances ambient visible light and converts near-infrared light into visible light which can be seen by the user; this is known as I2 (image intensification). By comparison, viewing of infrared thermal radiation is referred to as thermal imaging and operates in a different section of the infrared spectrum. A night vision device usually consists of an image intensifier tube, a protective housing, and may have some type of mounting system. Many NVDs also include a protective sacrificial lens, mounted over the front lens (ie. objective lens) on NVDs to protect the latter from damage by environmental hazards,[1] and some can incorporate telescopic lenses. The image produced by an NVD is typically monochrome green, as green was considered to be the easiest color to look at for prolonged periods in the dark.[2] Night vision devices may be passive, relying solely on ambient light, or may be active, using an IR (infrared) illuminator to visualize the environment better.

Night vision devices can be handheld but many are head-mounted and attach to helmets. When used with firearms, an IR laser sight is often mounted to the user's weapon. The laser sight produces an infrared beam that is only visible through an NVD and aids with aiming.[3] Some night vision devices are specially made to be mounted to firearms. These can be used in conjunction with weapon sights like rifle scopes or can be used as standalone sights; some thermal weapon sights have been designed to provide similar capabilities.[4]

These devices were first used in World War II and came into wide use during the Vietnam War.[5] The technology has evolved greatly since its introduction, leading to several "generations"[6] of night-vision equipment with performance increases and price reductions. Consequently, though they are commonly used by the military and law enforcement agencies, night vision devices are available to civilian users for a wide range of applications including aviation, driving, demining, etc.[7]

History

Early night vision technology used prior to the end of World War II has been described as Generation 0.[5]

In 1929 Hungarian physicist Kálmán Tihanyi invented an infrared-sensitive electronic television camera for anti-aircraft defense in the UK.[8]

Night-vision devices were introduced in the German Army as early as 1939 and were used in World War II. AEG started developing the first devices in 1935. In mid-1943, the German Army began the first tests with infrared night-vision devices and telescopic rangefinders mounted on Panther tanks. Two different arrangements were constructed and used on Panther tanks. The Sperber FG 1250 ("Sparrow Hawk"), with a range of up to 600 m, had a 30 cm infrared searchlight and an image converter operated by the tank commander.

From late 1944 to March 1945 the German military conducted successful tests of FG 1250 sets mounted on Panther Ausf. G tanks (and other variants). Before World War II ended in 1945, approximately 50 (or 63) Panthers had been equipped with the FG 1250 and saw combat on both the Eastern and Western Fronts. The "Vampir" man-portable system for infantry was used with StG 44 assault rifles.[9]

Parallel development of night-vision systems occurred in the US. The M1 and M3 infrared night-sighting devices, also known as the "sniperscope" or "snooperscope", saw limited service with the US Army in World War II[10] and in the Korean War, to assist snipers.[5] These were active devices, using a large infrared light source to illuminate targets. Their image-intensifier tubes used an anode and an S-1 photocathode, made primarily of silver, cesium, and oxygen, and electrostatic inversion with electron acceleration was used to achieve gain.[11]

An experimental Soviet device called the PAU-2 was field-tested in 1942.

In 1938 the British Admiralty assumed responsibility for all British military infra-red research. They worked first with Philips until the fall of the Netherlands, then with Philips' UK subsidiary Radio Transmission Equipment Ltd., and finally with EMI, who in early 1941 provided the compact lightweight image converter tubes required. By July 1942 the British had produced a binocular apparatus called 'Design E'. This was bulky, needing an external power pack generating 7,000 volts, but saw limited use with amphibious vehicles of 79th Armoured Division in the 1945 crossing of the Rhine. Between May and June 1943, 43rd (Wessex) Infantry Division trialled man-portable night vision sets, and the British later experimented with mounting the devices to Mark III and Mark II(S) Sten submachine guns. However, by January 1945 the British had only made seven infra-red receiver sets. Although some were sent to India and Australia for trials before the end of 1945, by the Korean War and Malayan Emergency the British were using night vision equipment supplied by the United States.[12]

Examples of early night vision equipment include:

  • FG 1250 Sperber
  • ZG 1229 Vampir
  • PAU-2
  • PNV-57A tanker goggles
  • SU-49/PAS-5[13]
  • T-120 Sniperscope, 1st model (World War II)
  • M2 Sniperscope, 2nd model (World War II)
  • M3 Sniperscope, 4th model (Korean War)
  • AN/PAS-4 (early Vietnam War)[14]

After World War II, Vladimir K. Zworykin developed the first practical commercial night-vision device at Radio Corporation of America, intended for civilian use. Zworykin's idea came from a former radio-guided missile.[15] At that time, infrared was commonly called black light, a term later restricted to ultraviolet. Zworykin's invention was not a success due to its large size and high cost.[16]

United States

Generation 1

An M16A1 rifle fitted with the AN/PVS-2 Starlight scope

First-generation passive devices developed and patented by the US Army in the 1960s, introduced during the Vietnam War, were an adaptation of earlier active GEN 0 technology and relied on ambient light instead of using an extra infrared light source. Using an S-20 photocathode, their image intensifiers produced a light amplification of around 1,000,[17] but they were quite bulky and required moonlight to function properly.

Examples:

Generation 2 (GEN II)

A cut-open and depotted AN/PVS-5, showing the components of a night-vision device. This device was manufactured in 2nd generation (5A to 5C) and 3rd generation (5D)

Second-generation devices developed in the 1970s, featuring an improved image-intensifier tube using a micro-channel plate (MCP)[21] with an S-25 photocathode,[11] and resulted in a much brighter image, especially around the edges of the lens. This led to increased clarity in low ambient-light environments, such as moonless nights. Light amplification was around 20,000.[17] Image resolution and reliability were also improved.

Examples:

Later advances in GEN II technology brought the tactical characteristics of "GEN II+" devices (equipped with better optics, SUPERGEN tubes, improved resolution and better signal-to-noise ratios), though GEN II+ is not formally recognized by the NVESD.[24]

Generation 3 (GEN III)

An early development version of the AN/PVS-7 goggle

Third-generation night-vision systems, developed in the late 1980s, maintained the MCP from Gen II, but used a photocathode made with gallium arsenide, which further improved image resolution. Gallium arsenide photocathodes are primarily manufactured by L3Harris Technologies and Elbit Systems of America and image light from 500-900 nm.[25] In addition, the MCP is coated with an ion barrier film to increase tube life. However, the ion barrier causes fewer electrons to pass through, thus diminishing the improvement that the gallium-arsenide photocathode provides. Because of the ion barrier, the "halo" effect around bright spots or light sources is larger as well. Light amplification with these devices is improved to around 30,000–50,000.[17] Power consumption is higher than in GEN II tubes.

Examples:

Auto-gating

Autogating (ATG) is a function which rapidly switches the power supply's voltage to the photocathode on and off. However, these switches are rapid enough that they are not detectable to the human eye and peak voltage supplied to the night vision device is maintained.[29] This achieves several purposes: first, it reduces the "duty cycle" (ie. the amount of time that the tube has power running through it) which increases the device's lifespan.[30] Second, autogating enhances the BSP (Bright-Source Protection), which is the built-in system that reduces the voltage supplied to the photocathode in response to ambient light levels. ABC (Automatic Brightness Control) is a similar function which modulates the amount of voltage supplied to the microchannel plate (rather than the photocathode) in response to ambient light. Together, BSP and ABC (alongside the autogating function) serve to prevent temporary blindness for the user and prevent damage to the tube when the night vision device is exposed to sudden bright sources of light,[29] like a muzzle flash or artificial lighting being switched on.[30] These modulation systems also help maintain a steady illumination level in the user's view which improves the ability to keep "eyes on target" in spite of temporary flashes of light. These functions are especially useful for pilots, soldiers in urban environments, and special operations forces who may be exposed to dynamic, rapidly changing light levels.[30][31]

Generation 3+ (GEN III OMNI I–IX)

"Diagram of an image intensifier."
Generation II, III and IV devices use a microchannel plate for amplification. Photons from a dimly lit source enter the objective lens (on the left) and strike the photocathode (gray plate). The photocathode (which is negatively biased) releases electrons, which are accelerated to the higher-voltage microchannel plate (red). Each electron causes multiple electrons to be released from the microchannel plate. The electrons are drawn to the higher-voltage phosphor screen (green). Electrons that strike the phosphor screen cause the phosphor to produce photons of light viewable through the eyepiece lenses.

OMNI, or OMNIBUS, refers to a series of contracts through which the US Army purchased GEN III night vision devices. This started with OMNI I which procured AN/PVS-7A and AN/PVS-7B devices, then continued with OMNI II (1990), OMNI III (1992), OMNI IV (1996), OMNI V (1998), OMNI VI (2002), OMNI VII (2005),[32] OMNI VIII, and OMNI IX.[33]

However, OMNI is not a specification in and of itself. The performance of a particular GEN III OMNI device generally depends upon the tube which is used. For example, a GEN III OMNI III MX-10160A/AVS-6 tube will perform similarly to a GEN III OMNI VII MX-10160A/AVS-6 tube, even though the former was manufactured in ~1992 and the latter ~2005.[33][34]

One particular technology, PINNACLE©, is often mentioned as well. It is a proprietary thin-film microchannel plate technology created by ITT (since combined with Exelis, acquired by Harris, then sold to Elbit Systems of America) that was included in the OMNI VII contract. The thin-film improves performance.[34]

That being said, GEN III OMNI V–IX devices developed in the 2000s and onward can differ from standard GEN III and earlier GEN III OMNI I-IV devices in one or both of two important ways:

  1. An automatic gated power supply system regulates the photocathode voltage, allowing the NVD to instantaneously adapt to changing light conditions.[35]
  2. A removed or greatly thinned ion barrier (thin film) which decreases the number of electrons that are usually rejected by the standard GEN III MCP, hence resulting in less image noise.[36] The disadvantage to a thin or removed ion barrier is the overall decrease in tube life from a theoretical 20,000 h mean time to failure (MTTF) for standard Gen III type, to 15,000 h MTTF for thin film types. However, this is largely negated by the low number of image-intensifier tubes that reach 15,000 h of operation before requiring replacement.

While the consumer market sometimes classifies this type of system as generation 4, the United States military describes these systems as generation 3 autogated tubes (GEN III OMNI V-IX). Moreover, as autogating power supplies can now be added to any previous generation of night-vision devices, "autogating" capability does not automatically class the devices as belonging to a particular OMNI classification. Any postnominals appearing after a generation type (i.e., Gen II+, Gen III+) do not change the generation type of the device, but instead indicate improvement(s) over the original specification's requirements.[37]

Examples:

  • AN/PVS-22[38]
  • NVS-22
  • Binocular Night Vision Device (BNVD) (AN/PVS-15, AN/PVS-21, AN/PVS-23, AN/PVS-31A, AN/PVS-31D)
  • Ground Panoramic Night Vision Goggle (GPNVG-18)

Figure of merit

Figure of merit (FoM) is a number which gives a quantitative measure of a night vision device's effectiveness and clarity. It is calculated using the number of line pairs per millimeter which a user can detect while using the device multiplied by the image intensifier's signal-to-noise ratio.[39][33][40]

In the late 1990s, innovations in photocathode technology significantly increased the signal-to-noise ratio, with newly developed tubes starting to surpass the performance of standard Gen 3 tubes.

By 2001, the United States federal government concluded that a tube's "generation" was not a determinant factor of a tube's global performance, making the term "generation" irrelevant in determining the performance of an image-intensifier tube, and therefore eliminated the term as a basis of export regulations.

Though image-intensification technology employed by different manufacturers varies, from the tactical point of view, a night-vision system is an optical device that enables vision in conditions of low light. The US government itself has recognized the fact that the technology itself makes little difference, as long as an operator can see clearly at night. Consequently, the United States bases export regulations not on the generation, but on the figure of merit.

ITAR regulations specify that US-made tubes with a FOM greater than 1400 are not exportable outside the US; however, the Defense Technology Security Administration (DTSA) can waive that policy on a case-by-case basis.

Fusion night vision

A comparison of I² only night vision (above) and I² plus thermal fusion (below)

Fusion night vision is a newer advance in night vision technology which combines I² (image intensification) with thermal imaging, which functions in the medium (MWIR 3-5 µm) and/or long (LWIR 8-14 µm) wavelength range.[41] Initial models appeared in the 2000s and progressed in the 2010s.[32] Some devices are dedicated fusion devices while others are clip-on thermal imagers which can add a thermal overlay to standard I² night vision devices.[42] Fusion technologies combines the strengths of traditional I², which is excellent for navigation and discernment of fine details, with the strengths of thermal imaging, which excels in spotting the heat signatures of targets. Fusion systems have offered a number of different imaging modes including "fused" night vision with thermal overlay, night vision only, thermal only, and various special fusion modes like outline (which outlines objects that have thermal signatures) or "decamouflage", which highlights all objects that are of near-human temperatures. Fusion devices do struggle with weight and power usage and are often heavier and have shorter run times than contemporary I²-only devices.[43]

Aside from fusion of I² and thermal imaging within a single device, some users have tried using an I² device over one eye and a thermal device over the other eye, relying on the human visual system to provide a binocular combined view of the two. Some, but not all, thermal imaging systems can also be viewed through a night vision device (ie. lining up the thermal imager in front of the I² night vision device) to produce a form of fusion vision.[42][44]

Examples:

  • AN/PSQ-20 ENVG (Enhanced Night Vision Goggles)
  • AN/PSQ-36 FGE (Fusion Goggle Enhanced, previously FGS for Fusion Goggle System)
  • AN/PSQ-42 ENVG-B (Enhanced Night Vision Goggles-Binocular)
  • AN/PSQ-44 ENVG-B (Enhanced Night Vision Goggles-Binocular)
  • AN/PAS-29 COTI/E-COTI: (Enhanced) Clip-On Thermal Imager

Out of Band (OOB)

Out of Band (OOB) refers to night vision technologies which operate outside of the 500-900 nm NIR (near infrared) range that traditional Gen III gallium arsenide tubes detect. Imaging outside the usual spectrum is possible with dedicated OOB image intensifier tubes or with clip-on devices. Two examples include Photonis' 4G HyMa (Hybrid Multi-Alkali) image intensifier tubes (bandwidth of 350-1100 nm, from near UV to IR) and Safran Optics 1's AN/PAS-34 E-COSI (Enhanced Clip-On SWIR Imager), which clips onto standard night vision devices and provides an overlay (in the 900-1700 nm range), respectively.[45]

OOB provides several advantages. First, OOB imaging makes better use of ambient light; while a standard Gen III device can only intensify light in the 500-900 nm NIR range, an OOB device also intensifies any UV light or SWIR light in the environment. As a result, an OOB device might be able to see more on a starlit night than a standard GEN III device could. Second, OOB imaging can help JTACs and other FACs when marking targets with a laser designator. Many laser designators use 1064nm light, which is barely visible to standard Gen III devices, so ground personnel may need to use a separate "see-spot" device to visually confirm that the designator's targeting laser is on target. OOB night vision devices, however, can easily image the 1064nm range.[25][46]

Third, OOB light is not visible to most commercially available night vision devices. Despite ITAR restrictions, night vision technologies have proliferated among peer and near-peer countries and have also made their way into terrorist hands. For example, there has been documented use of night vision equipment by the Taliban Red Unit.[47] As a result, if friendly forces are using night vision equipment like IR illuminators, IR strobes, IR lasers, etc. then hostile forces using night vision equipment could spot them as well. OOB strobes, illuminators, and lasers, on the other hand, are easily visible when using OOB night vision but much more difficult to spot with current Gen III night vision equipment as they appear faintly if at all (depending on wavelength and intensity).[48][49]

Additionally, depending on the wavelengths covered by an OOB imaging device, users might be able to observe the lasers used in laser rangefinders as they often operate in the 1550nm range.[50]

Examples (ground personnel, helmet-mounted imagers):

  • Photonis 4G INTENS image intensifier tubes (350-1100 nm)[49][25]
  • Optics 1 AN/PAS-34 E-COSI (Enhanced Clip-On SWIR Imager) (900-1700 nm)[45]
  • Optics 1 COSMO (Clip-On SWIR Monocular)[51]

Examples (ground personnel, weapon-mounted lasers):

  • B.E. Meyers & Co. MAWL-CLAD (Modular Aiming Weapon Laser--Covert Laser Aiming Device) (1064 nm laser)[52][53][54]
  • LA-17/PEQ D-PILS (Dual-band Pointer and Illuminator Laser System) (1400-1600 nm)[55][56]
  • Rheinmetall LM-VAMPIR (Laser Module--VAriable Multi Purpose InfraRed)[57]
  • AN/PSQ-23 STORM, STORM-PI, STORM-SLX, STORM II; and L3Harris SPEAR (1570 nm)[55][50]
  • Optics 1 ICUGR (Integrated Compact Ultralight Gun-mounted Rangefinder) (1550 nm)[58]
  • Rheinmetall FCS-RPAL (Fire Control System--Rheinmetall Precision Aiming Laser) (1550 nm)[59]
  • Rheinmetall FCS-TRB (Fire Control System--TacRay Ballistic) (1550 nm)[60]
  • Wilcox RAPTAR S (Rapid Targeting and Ranging Module) (1550 nm)[61]
  • Wilcox MRF Xe (Micro Range Finder--Enhanced) (1550 nm)[62]
  • B.E. Meyers & Co. IZLID Ultra 1064 and 1550 (Infrared Zoom Laser Illuminator Designator) (1064 nm, 1550 nm)[63]
  • Optics 1 CTAM (Coded Target Acquisition Marker) (1064 nm)[64]

Wide Field of View (WFoV)

A US airman tests AN/AVS-10 panoramic night-vision goggles in March 2006.
GPNVG-18.

Night vision devices, whether monocular or binocular, typically have a limited field of view (FoV); the commonly used AN/PVS-14 has a FoV of 40°[65] which is rather less than the 95° monocular horizontal FoV and 190° binocular horizontal FoV that humans possess.[66] Due to the limited FoV, users must visually scan about to fully check their surroundings, which is a time consuming process. This limitation is particularly evident when using night vision devices for flying, driving, or CQB where split second decisions must be made. Because of these limitations, many SF/SOF operators preferred to use white light rather than night vision when conducting CQB.[67] As a result, much time and effort has gone into research to develop a wider FoV solution for night vision devices. As of 2021, there were three primary methods for increasing peripheral vision in night vision devices (each with their own advantages and disadvantages):

  • Panoramic night vision goggles (PNVG)
  • Foveated night vision goggles (F-NVG)
  • Diverging image tube night vision goggles (DIT-NVG)[68]

Panoramic night vision goggles (PNVG) increase field of view by increasing the number of sensors: if tubes are generally limited to 40°, then one can add more tubes to increase peripheral vision. This solution works well and does not compromise device performance or visual clarity but comes at the cost of size, weight, power requirements, and complexity.[68] A well-known set of peripheral NVGs is the GPNVG-18 (Ground Peripheral Night Vision Goggle), which was used in the raid in Abbottabad that killed Osama bin Laden.[69] These goggles, and the aviation AN/AVS-10 PNVG from which they were derived, offer a 97° FoV.[67]

Foveated night vision (F-NVG) uses specialized WFoV optics to increase the field of view through a night vision intensifier tube. The fovea refers to the part of the retina which is responsible for central vision. These night vision devices have users still look "straight through" the tubes so light passing through the center of the tube falls on the foveal retina, as is the case with traditional binocular NVGs. While these devices increase FoV, it comes at the price of image quality and edge distortions.[68] A US Naval contract for US$47.6 million was awarded to Kent Optronics to retrofit AN/PVS-15 units with WFoV optics that expanded them to 80° FoV with less than 4% distortion.[70][71][72]

Diagram of the WFoV BNVD, based on AN/PVS-31A

Diverging image tube (DIT) night vision increases FoV by positioning the night vision tubes so they are no longer parallel but are angled slightly outward. This increases peripheral FoV but causes distortion and reduced image quality. Unfortunately, optical clarity is best when looking through the center of an image intensifier tube. With DIT, users are no longer looking "straight through" the center of the tubes (which provides the clearest images) and light passing through the center of the tubes no longer falls on the fovea (the area of clearest vision). The AN/PVS-25 was one such example of DIT night vision from the late 2000s.[68] The WFoV BNVD is a variant of the AN/PVS-31A which incorporates both F-NVG and DIT-NVG concepts: the foveal WFoV optics increase the FoV of each tube from 40° to 55°, while the slight angulation of the tubes positions them so there is a 40° overlap of binocular vision in the center and a total 70° bi-ocular FoV. With the performance of the modified AN/PVS-31A tubes used, the WFoV BNVD has a FoM of 2706 which is better than the FoM in both the GPNVG-18 and the standard AN/PVS-31A.[73][68]

Examples:

  • Panoramic NVG (PNVG):
  • Foveated NVG (F-NVG):
    • WFoV F-NVG retrofit AN/PVS-15 goggles
    • WFoV BNVD (combined F-NVG and DIT-NVG variant of AN/PVS-31A)
  • Diverging Image Tube NVG (DIT-NVG)
    • AN/PVS-25
    • WFoV BNVD (combined F-NVG and DIT-NVG variant of AN/PVS-31A)
    • Noise Fighters Panobridge: binocular bridge mount which combines two AN/PVS-14 monoculars and allows them to be angulated outward or positioned parallel for DIT or traditional configuration[74][68]

Digital

Some night vision devices, including several of the ENVG (AN/PSQ-20) models, are "digital". Introduced in the late 2000s, these allow electronic transmission of the device's night vision view, though this often comes at the price of size, weight, power usage.[32]

Advancements in high-sensitivity digital camera technology has made it possible to produce NVGs that use a camera-display pair instead of an image intensifier. At the low end of the market, these devices can offer Gen-1-equivalent quality at a lower cost.[75] At the higher end, SiOnyx has produced digital color NVGs. The "Opsin" of 2022 has a form factor and helmet weight similar to that of an AN/PVS-14, but requires a separate battery pack with a shorter battery life and remains inferior in sensitivity.[76] Being a camera-based design, it can however tolerate bright light and process a wider range of wavelengths.[77]

Other technologies

Ceramic Optical Ruggedized Engine (CORE) is a technology which was first shown at the 2012 SHOT Show in Las Vegas, NV by Armasight.[78] CORE produces a higher-performance Gen 1 tubes. The main difference between CORE tubes and standard Gen 1 tubes is introduction of a ceramic plate instead of a glass one. This plate is produced from specially formulated ceramic and metal alloys. Edge distortion is improved, photo sensitivity is increased, and the resolution can be as high as 60 lp/mm. CORE is still considered Gen 1, as it does not utilize a microchannel plate.

Scientists at the University of Michigan have developed a contact lens that can act as a night-vision device. The lens has a thin strip of graphene between layers of glass that reacts to photons to make dark images look brighter. Current prototypes only absorb 2.3% of light, so the percentage of light pickup has to rise before the lens can be viable. The graphene technology can be expanded into other uses, like car windshields, to improve night-driving. The US. Army is interested in the technology to potentially replace night-vision goggles.[79]

The Sensor and Electron Devices Directorate (SEDD) of the US Army Research Laboratory developed quantum-well infrared detector (QWID) technology. This technology's epitaxial layers, which result in diode formation, compose a gallium arsenide or aluminum gallium arsenide system (GaAs or AlGaAs). It is particularly sensitive to infrared waves that are mid-long lengths. The Corrugated QWIP (CQWIP) broadens detection capacity by using a resonance superstructure to orient more of the electric field parallel, so that it can be absorbed. Although cryogenic cooling between 77 K and 85 K is required, QWID technology is considered for constant surveillance viewing due to its claimed low cost and uniformity in materials.[80]

Materials from the II–VI compounds, such as HgCdTe, are used for high-performing infrared light-sensing cameras. In 2017 the US Army Research Labs in collaboration with Stony Brook University developed an alternative within the III–V family of compounds. InAsSb, a III–V compound, is commonly used commercially for opto-electronics in items such as DVDs and cell phones. Low cost and larger semiconductors frequently cause atomic spacing to decrease leading to size mismatch defects. To counteract this possibility in implementing InAsSb, scientists added a graded layer with increased atomic spacing and an intermediate layer of the substrate GaAs to trap any potential defects. This technology was designed with night-time military operations in mind.[81]

Soviet Union and Russia

Active night-vision scope NSP-2 mounted on an AKML
NSPU (1PN34) 3.5× night-vision scope mounted on an AKS-74U
1PN93-2 night-vision scope mounted on a RPG-7D3

The Soviet Union, and after 1991 the Russian Federation, have developed a range of night-vision devices. Models used after 1960 by the Russian/Soviet Army are designated 1PNxx (Russian: 1ПНxx), where 1PN is the GRAU index of night-vision devices. The PN stands for pritsel nochnoy (Russian: прицел ночной), meaning "night sight", and the xx is the model number. Different models introduced around the same time use the same type of batteries and mechanism for mounting on the weapon. The multi-weapon models have replaceable elevation scales, with one scale for the ballistic arc of each supported weapon. The weapons supported include the AK family, sniper rifles, light machine guns and hand-held grenade launchers.

  • 1PN34 refractor-based night sight for a range of small arms and grenade launchers, see photo.
  • 1PN50 refractor-based night observation binoculars.[82]
  • 1PN51 reflector-based night sight for a range of small arms and grenade launchers.[83]
  • 1PN51-2 reflector-based night sight for the RPG-29.[84]
  • 1PN58 refractor-based night sight for a range of small arms and grenade launchers.[85]
  • 1PN93-2 reflector-based night sight for the RPG-7D3, see photo.
  • 1PN110, a more recent (~Gen 3) night sight for the RPG-29.[86]
  • 1PN113, a night sight similar to the 1PN110, for the SV-98 sniper rifle.[86]

The Russian army has also contracted the development of and fielded a series of so-called counter-sniper night sights (Russian: Антиснайпер, romanized: Antisnayper). The counter-sniper night sight is an active system that uses laser pulses from a laser diode to detect reflections from the focal elements of enemy optical systems and estimate their range. The vendor claims that this system is unparalleled:[87]

  • 1PN106 counter-sniper night sight for the SVD sniper rifle and its SVDS variant.
  • 1PN119 counter-sniper night sight for the PKMN and Pecheneg light machine guns.
  • 1PN120 counter-sniper night sight for the SVDK sniper rifle.
  • 1PN121 counter-sniper night sight for the ASVK large caliber sniper rifle.
  • 1PN123 counter-sniper night sight for the SV-98 sniper rifle.

Legality

  • Belgium: firearms legislation forbids any night-vision device if it can be mounted on a firearm; even if not mounted, they are considered illegal.[88]
  • Czech Republic: not regulated.[89] Previously only available for hunting.
  • Germany: law forbids such devices if their purpose is to be mounted on firearms.[90][91] Due to the African swine fever virus, exceptions for hunting wild boars were made around 2021.[92]
  • Iceland: the use of night-vision devices for hunting is prohibited, while there are no restrictions on the devices themselves.[93]
  • India: civilian possession and trading of night-vision scopes is illegal. Permission is needed from Union home ministry for possession.[94]
  • Netherlands: the possession of night-vision devices is not regulated, but night-vision devices mounted on firearms are forbidden unless a permit is granted. The usage of night-vision equipment for night-time hunting (weapon mounted) is allowed only with a special permit in certain areas (the Veluwe) for hunting wild boar.
  • New Zealand: rescue helicopter services use several sets of 3rd-generation night-vision goggles imported from the US, and the country is required to restrict access to the equipment to comply with the strict regulations regarding their export.[95] There are no prohibitions on the ownership or use of night-vision equipment for shooting non-indigenous game animals, such as rabbits, hares, deer, pigs, tahr, chamois, goats, wallabies, etc.
  • United States: a 2010–2011 summary of state hunting regulations for the use of night-vision equipment in hunting[96] listed 13 states in which the equipment is prohibited, 17 states with various restrictions (e.g. only for certain non-game species, and/or in a certain date range), and 20 states without restrictions. It did not summarize the regulations for thermal-imaging equipment.
    • California: it is a misdemeanor to possess a device "designed for or adaptable to use on a firearm which, through the use of a projected infrared light source and electronic telescope, enables the operator thereof to visually determine and locate the presence of objects during the night-time".[97] This essentially covers scopes using Gen0 technology, but not the subsequent generations. There was an effort in 1995[98] to further expand restrictions to forbid night-vision devices that did not incorporate a light source, but it did not become law.
    • Minnesota, as of 2014, "A person may not possess night vision or thermal imaging equipment while taking wild animals or while having in possession [an uncased and loaded weapon] that could be used to take wild animals."[99] There is an exception for law-enforcement and military use. The night-vision prohibition was enacted in 2007, and the thermal-imaging prohibition was added in 2014. Two bills were introduced in the Minnesota Legislature in 2016, proposing to allow night-vision and thermal-imaging equipment for, respectively, 1) "predator" or 2) "unprotected wild animal" hunting.[100]

See also

References

  1. ↑ P, Will (10 August 2021). "Night Vision Devices Releases Lightweight Sacrificial Windows". The Firearm Blog. Archived from the original on 10 August 2021.
  2. ↑ Liszewski, Andrew (30 April 2021). "The Army's New Night-Vision Goggles Look Like Technology Stolen From Aliens". Gizmodo. Archived from the original on 30 April 2021. Retrieved 23 May 2021.
  3. ↑ Utley, Sean (2020-06-11). "Selecting An IR Laser And Illuminator". Firearms News. Archived from the original on 2020-07-27. Retrieved 2021-01-22.
  4. ↑ Lynch, Kyle (15 January 2019). "Why You Should Consider Adding a Clip On Night Vision Device". Tactical Life. Archived from the original on 18 September 2021. Retrieved 23 August 2022.
  5. 1 2 3 Tyson, Jeff (27 April 2001). "How Night Vision Works". HowStuffWorks. Archived from the original on 9 June 2022. Retrieved 1 March 2011.
  6. ↑ as defined by the US Army Night Vision and Electronic Sensors Directorate (NVESD)
  7. ↑ "NVESD About Us". Fort Belvoir, VA: Night Vision & Electronic Sensors Directorate. Archived from the original on 1 February 2010.
  8. ↑ Naughton, Russell (10 August 2004). "Kalman Tihanyi (1897–1947)". Monash University. Archived from the original on 8 October 2020. Retrieved 15 March 2013.
  9. ↑ "German Infrared Night-Vision Devices – Infrarot-Scheinwerfer". www.achtungpanzer.com. Archived from the original on 2010-01-25. Retrieved 16 March 2018.
  10. ↑ "Bull's-eyes in the Night". Popular Science. July 1946. p. 73.
  11. 1 2 "Image Intensification Tube Technology and Evolution". GlobalSecurity.org. Archived from the original on 20 June 2022. Retrieved 2011-03-01.
  12. ↑ Wellard, Christian (18 October 2023). "British development of infra-red weapon sights, 1938–1953". Arms & Armour. 20 (2): 199–217. doi:10.1080/17416124.2023.2270302. S2CID 264324073. Retrieved 19 October 2023.
  13. 1 2 "Vietnam Era Night Vision: SU49/PAS 5 NVG and PAS 6 Infrared Metascope". Modern Forces. Archived from the original on 17 May 2022. Retrieved 9 June 2022.
  14. ↑ Fortier, David M. (24 July 2020). "How Does Night Vision Work?". Firearms News. Archived from the original on 21 April 2021. Retrieved 9 June 2022.
  15. ↑ Pennsylvania State University. Zworykin, Vladimir Archived 2012-08-31 at the Wayback Machine. Biographical sketch.
  16. ↑ "Black-Light Telescope Sees in the Dark". Popular Science Monthly. March 1936. p. 33.
  17. 1 2 3 "Night Vision Goggles (NVG)". GlobalSecurity.org. Archived from the original on 22 May 2022. Retrieved 16 March 2018.
  18. 1 2 Utah Gun Collector's Association. ""Fight at Night!" U.S. Army Night Vision, 1945-1980". Utah Gun Collectors Association. Archived from the original on 12 April 2022. Retrieved 10 June 2022.
  19. ↑ "5855-00-087-2942 (AN/PVS-1) Data". Part Target. Archived from the original on 3 November 2015. Retrieved 10 June 2022.
  20. ↑ "5855-00-087-2947 (AN/PVS-2) Data". Part Target. Archived from the original on 24 June 2016. Retrieved 10 June 2022.
  21. ↑ "Night Vision Equipment by Pulsar FAQ". pulsar-nv.com. Archived from the original on 23 August 2011. Retrieved 16 March 2018.
  22. ↑ "AN/PVS-4 Individual Weapon Night Sight". GlobalSecurity.org. Archived from the original on 24 August 2021. Retrieved 16 March 2018.
  23. ↑ "AN/PVS-5 Night Vision Goggles". GlobalSecurity.org. Archived from the original on 24 August 2021. Retrieved 16 March 2018.
  24. 1 2 Chrzanowski, K (June 2013). "Review of night vision technology" (PDF). Opto-Electronics Review. 21 (2): 153–181. Bibcode:2013OERv...21..153C. doi:10.2478/s11772-013-0089-3. S2CID 121662581. Archived from the original (PDF) on 27 May 2021.
  25. 1 2 3 "Differences between Gen3 and 4G image intensification technology" (PDF). Photonis Night Vision. October 2020. Archived from the original (PDF) on 5 May 2021. Retrieved 16 July 2022.
  26. ↑ "AN/PVS-7 Night Vision Goggle". GlobalSecurity.org. Archived from the original on 22 May 2022. Retrieved 16 March 2018.
  27. ↑ "AN/PVS-14, MONOCULAR NIGHT VISION DEVICE (MNVD)". GlobalSecurity.org. Archived from the original on 6 May 2022. Retrieved 16 March 2018.
  28. ↑ "CANVS COLOR NIGHT VISION GOGGLES". CANVS. Archived from the original on 29 October 2015. Retrieved 16 March 2018.
  29. 1 2 Montoro, Harry P. "Image Intensification: The Technology of Night Vision". Photonics. Archived from the original on 4 July 2021. Retrieved 19 May 2022.
  30. 1 2 3 "Photonis Night Vision Auto-Gating" (PDF). Photonis. March 2019. Archived from the original (PDF) on 6 January 2022. Retrieved 15 July 2022.
  31. ↑ "P-431 (Rev. 09-21) FLIGHT TRAINING INSTRUCTION NIGHT VISION GOGGLE PHASE TH-57C 2021" (PDF). Chief of Naval Air Training. Department of the Navy. 14 September 2021. pp. 2–5. Archived from the original (PDF) on 19 May 2022. Retrieved 19 May 2022.
  32. 1 2 3 Defense Industry Daily staff (6 May 2016). "Through a Glass, Darkly: Night Vision Gives US Troops Edge". Defense Industry Daily. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  33. 1 2 3 C, Nicholas (24 April 2020). "Friday Night Lights: Understanding Night Vision Specs And Generations". The Firearm Blog. Archived from the original on 22 January 2021. Retrieved 19 May 2022.
  34. 1 2 Lasky, Chip (2011). "PVS-14 Buyer's Guide" (PDF). TNVC. Archived from the original (PDF) on 19 July 2017. Retrieved 19 May 2022.
  35. ↑ Clemens, Candace (May 2007). "From starlight to street light" (PDF). Law Enforcement Technology. Archived from the original (PDF) on 2008-02-28. Retrieved 16 March 2018.
  36. ↑ "www.nivitech.com / Nightvision Technology / Principles of Nightvision Devices". nivitech.com. Archived from the original on 23 January 2018. Retrieved 16 March 2018.
  37. ↑ "How Night Vision Works in night vision Goggles, Scopes, Binoculars, Riflescopes". ATN Corp. Archived from the original on 18 June 2022. Retrieved 16 March 2018.
  38. ↑ "AN/PVS-22 Universal Night Sight Attachement". Nightvis. Archived from the original on 13 August 2006. Retrieved 16 March 2018.
  39. ↑ "Night Vision Specifications (2021 UPDATE)". Nite-walker. 26 November 2019. Archived from the original on 15 August 2021. Retrieved 19 May 2022.
  40. ↑ Bialos, Jeffrey P.; Koehl, Stuart L. (September 2005). "The NATO Response Force". National Defense University Center for Technology and National Security Policy. Archived from the original on June 29, 2011. Retrieved 2011-03-01.
  41. ↑ "Thermal Camera Specs You Should Know Before Buying". Teledyne FLIR. 18 December 2019. Archived from the original on 7 April 2022. Retrieved 16 July 2022.
  42. 1 2 C, Nicholas (17 May 2019). "FRIDAY NIGHT LIGHTS: DIY Thermal Fusion – By Our Powers Combined". The Firearm Blog. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  43. ↑ Gao, Charlie (29 March 2019). "This is How the Army Fights Wars "In the Dark"". The National Interest. Archived from the original on 30 March 2019. Retrieved 3 June 2022.
  44. ↑ "Adapter for mounting NOX18 to Panobridge". Noise Fighters. Archived from the original on 18 July 2022. Retrieved 18 July 2022.
  45. 1 2 Valpolini, Paolo (13 July 2020). "Safran completes its night vision portfolio". European Defense Review. Archived from the original on 27 May 2021. Retrieved 16 July 2022.
  46. ↑ Donval, Ariela; Fisher, Tali; Lipman, Ofir; Oron, Moshe (1 May 2012). "Laser designator protection filter for see-spot thermal imaging systems". Proceedings of SPIE Defense, Security, and Sensing 2012. 8353 (Infrared Technology and Applications XXXVIII): 835324–835324–8. Bibcode:2012SPIE.8353E..24D. doi:10.1117/12.916966. S2CID 122190698. Retrieved 16 July 2022.
  47. ↑ Tishman, Jon; Schoen, Dan (22 January 2021). "WE DON'T OWN THE NIGHT ANYMORE". Modern War Institute at West Point. Archived from the original on 22 January 2021. Retrieved 4 June 2022.
  48. ↑ C, Nicholas (11 June 2021). "Friday Night Lights: Night Vision OOB (Out Of Band) – Fact Or Fiction?". The Firearm Blog. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  49. 1 2 Kitson, David (5 September 2016). OUT-OF-BAND COUNTERMEASURE CAPABILITIES OF 4G SPECIFICATION IMAGE TUBES (PDF). Future Land Forces 2016 (PDF). Archived from the original (PDF) on 13 June 2022.
  50. 1 2 "SMALL PRECISION ENHANCED AIMING RANGEFINDER (SPEAR)". L3Harris Technologies. Archived from the original on 25 February 2022. Retrieved 2 June 2022.
  51. ↑ "COSMO Clip-On SWIR Monocular". Safran Optics 1. Archived from the original on 22 May 2022. Retrieved 17 July 2022.
  52. ↑ C, Nicholas (12 October 2017). "SWIR MAWL-CLAD – Now Even More Invisible IR Laser". The Firearm Blog. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  53. ↑ "B.E. MEYERS & CO. RELEASES THE MAWL-CLAD A NEW WAVELENGTH FOR THE MAWL SERIES". B.E. Meyers & Co. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  54. ↑ "MAWL-CLAD Laser Pointer". Scopex. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  55. 1 2 Schuster, Kurt; Kelly, Edward (18 September 2018). "Assessment for the Safe Use of Lasers: Pabarade Range, Lithuania" (PDF). Defense Technical Information Center. Air Force Research Laboratory. p. 14. Archived from the original (PDF) on 10 July 2021. Retrieved 19 May 2022.
  56. ↑ "5855-01-643-0982 (14300-3200, LA-17/PEQ) Data". Part Target. Archived from the original on 19 May 2022. Retrieved 19 May 2022.
  57. ↑ "LM-VAMPIR VARIABLE MUTLI PURPOSE INFRARED" (PDF). Rheinmetall. Archived from the original (PDF) on 14 July 2021. Retrieved 17 July 2022.
  58. ↑ "ICUGR Integrated Compact Ultralight Gun-Mounted Rangefinder". Safran Optics 1. Archived from the original on 13 March 2022. Retrieved 17 July 2022.
  59. ↑ "FCS-RPAL TACTICAL LASER RANGE FINDER WITH BALLISTIC COMPUTER" (PDF). Rheinmetall. Archived from the original (PDF) on 17 July 2022. Retrieved 17 July 2022.
  60. ↑ "FCS-TACRAY BALLISTIC TACTICAL LASER RANGE FINDER WITH BALLISTIC COMPUTER" (PDF). Rheinmetall. Archived from the original (PDF) on 17 July 2022. Retrieved 17 July 2022.
  61. ↑ "RAPTAR S RAPID TARGETING & RANGING MODULE - HIGH POWER" (PDF). Wilcox Industries. Archived from the original (PDF) on 17 July 2022. Retrieved 17 July 2022.
  62. ↑ "MRF Xe MICRO RANGE FINDER - ENHANCED - LOW POWER" (PDF). Wilcox Industries. Archived from the original (PDF) on 17 July 2022. Retrieved 17 July 2022.
  63. ↑ "BE MEYERS & CO RELEASES IZLID ULTRA IN 1064 NM AND 1550 NM SWIR VARIANTS". B.E. Meyers & Co. Archived from the original on 16 July 2022. Retrieved 16 July 2022.
  64. ↑ "CTAM Coded Target Acquisition Marker". Safran Optics 1. Archived from the original on 27 October 2021. Retrieved 17 July 2022.
  65. ↑ "L3HARRIS M914A (PVS-14) UNFILMED WHITE PHOSPHOR 2376+ FOM". TNVC. February 2022. Archived from the original on 22 May 2022. Retrieved 11 June 2022.
  66. ↑ Howard, Ian P.; Rogers, Brian J. (1995). Binocular vision and stereopsis. New York: Oxford University Press. p. 32. ISBN 978-0-19-508476-4. Retrieved 3 June 2014.
  67. 1 2 Lasky, Chip (December 2012). "GPNVG-18 L-3 Ground Panoramic Night Vision Goggle" (PDF). TNVC. Archived from the original (PDF) on 8 March 2021. Retrieved 19 May 2022.
  68. 1 2 3 4 5 6 Kim, Augee (17 July 2017). "TNVC, INC. WFOV (WIDE FIELD OF VIEW) NIGHT VISION GOGGLE OVERVIEW" (PDF). TNVC. Archived from the original (PDF) on 10 June 2022. Retrieved 21 June 2022.
  69. ↑ Tarantola, Andrew (6 November 2014). "The Four-Eyed Night Vision Goggles That Helped Take Down Bin Laden". Gizmodo. Archived from the original on 2 April 2022. Retrieved 19 May 2022.
  70. ↑ "Navy SBIR/STTR Success Wide Field-of-View Foveal-Night Vision Goggle Retrofit" (PDF). Navy Small Business Innovation Research. 2016. Archived from the original (PDF) on 13 February 2022. Retrieved 21 June 2022.
  71. ↑ Keller, John (9 May 2016). "Navy asks Kent Optronics to develop wide-field-of-view binocular night-vision goggles". Military Aerospace Electronics. Crane, Indiana. Archived from the original on 21 June 2022. Retrieved 21 June 2022.
  72. ↑ "N-Vision Optics Announces New Wide Field of View PVS-15 Night Vision Binocular". Soldier Systems Daily. 6 January 2017. Archived from the original on 2 February 2020. Retrieved 21 June 2022.
  73. ↑ "Evolution of USASOC Future Force Capabilities" (PDF). NDIA. USASOC. 2017. Archived from the original (PDF) on 15 March 2022. Retrieved 22 May 2022.
  74. ↑ "PANOBRIDGE MK2". Noise Fighters. Archived from the original on 31 March 2022. Retrieved 18 July 2022.
  75. ↑ Reviews, Best Binocular (30 October 2012). "How Digital Night Vision Works". Best Binocular Reviews.
  76. ↑ "Night Vision: Digital vs Analog, which is best?". Gloom Group.
  77. ↑ T.REX ARMS (Feb 5, 2023). "SiOnyx Opsin: Digital Night Vision HAS ARRIVED". YouTube.
  78. ↑ "Armasight Spark". Outdoors Bay. Archived from the original on 8 May 2012.
  79. ↑ Hoffman, Mike (28 March 2014). "Collaboration between DefenseTech and LEON". Defense Tech. Archived from the original on 28 March 2014.
  80. ↑ Ratches, James; Chait, Richard; Lyons, John W. (February 2013). "Some Recent Sensor-Related Army Critical Technology Events" (PDF). National Defense University. Center for Technology and National Security Policy. Archived from the original (PDF) on 6 May 2022.
  81. ↑ "Researchers Develop New Material for Army Night-Time Operations". AZO materials. 12 January 2018. Retrieved 5 July 2018.
  82. ↑ БИНОКЛЬ НОЧНОЙ 1ПН50 ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ [NIGHT BINOCULARS 1PN50 TECHNICAL DESCRIPTION AND OPERATING INSTRUCTIONS] (in Russian). 55 pages.
  83. ↑ ИЗДЕЛИЕ 1ПН51 ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ [PRODUCT 1PN51 TECHNICAL DESCRIPTION AND OPERATING INSTRUCTIONS] (in Russian). January 1992. 48 pages.
  84. ↑ ИЗДЕЛИЕ 1ПН51-2 ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ [PRODUCT 1PN51-2 TECHNICAL DESCRIPTION AND OPERATING INSTRUCTIONS] (in Russian). September 1991. 52 pages.
  85. ↑ ИЗДЕЛИЕ 1ПН58 ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ [PRODUCT 1PN58 TECHNICAL DESCRIPTION AND OPERATING INSTRUCTIONS] (in Russian). February 1991. 53 pages.
  86. 1 2 "1PN110 and 1PN113 Night Vision Sights". gunsru.ru. Archived from the original on 2015-04-26. Retrieved 2014-11-26.
  87. ↑ "Anti-Sniper Special Purpose Night Vision Sights". gunsru.ru. Retrieved 2015-03-15.
  88. ↑ "Wapenwet – Gecoördineerde versie | Wapenunie Online". Wapenunie.be. Retrieved 2016-12-23.
  89. ↑ Gawron, Tomáš (22 December 2020). "Přehledně: Jaké změny přináší novela zákona o zbraních [What changes are coming with the Firearms Act Amendment]". zbrojnice.com (in Czech). Retrieved 22 December 2020.,
  90. ↑ Section 19 5a of the German Bundesjagdgesetz (BJagdG) states: "It is forbidden to use artificial light sources, mirrors, devices to illuminate or light targets, or night vision devices with image converters or electronic amplification intended for guns." These aids are not banned for observation purposes but for catching or killing game.
  91. ↑ "Lust auf Nachtjagd geht nicht ohne Nachtsichtgeräte Thermalgeräte" (in German). 12 July 2017. Retrieved 21 September 2018.
  92. ↑ dpa/lnw (2021-01-30). "Wildschwein-Jagd mit Nachtsichtgeräten in NRW erlaubt". proplanta.de (in German). Retrieved 2022-09-21.
  93. ↑ "THERMAL VISION TECHNOLOGY A MAJOR BENEFIT TO THE HUNTING MARKET". LYNRED. Archived from the original on 23 November 2021. Retrieved 23 November 2021.
  94. ↑ "Available online in India: Military-grade equipment banned for commercial sale". Hindustan Times. 14 December 2016.
  95. ↑ "Seeing in the Dark", Vector, magazine of the Civil Aviation Authority of New Zealand, January/February 2008, pages 10–11.
  96. ↑ "A 50 State guide – is night vision legal to use for hunting in my State?". High Tech Red Neck. 2010.
  97. ↑ "WAIS Document Retrieval". www.leginfo.ca.gov. Retrieved 16 March 2018.
  98. ↑ "AB 1059". ca.gov. Archived from the original on 11 July 2012. Retrieved 16 March 2018.
  99. ↑ "MN Statutes Section 97B.086". MN Revisor of Statutes. State of MN. Retrieved 31 March 2016.
  100. ↑ Orrick, Dave (2016-03-29). "Would night vision make coyote hunting safer? Divisions arise". Pioneer Press.
Wikimedia Commons has media related to Night vision devices.

US patents

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.