Jeep CJ
Jeep CJ-2A
Overview
Manufacturer	Willys-Overland (1944-1953) Willys Motors[1] (1953-1963) Kaiser Jeep[1] (1963-1970) American Motors Corporation (Jeep) (1971-1986)
Production	1944-1986 More than 1.5 million[2]
Assembly	Toledo Complex Toledo, Ohio, United States Maywood, California, United States Brampton Assembly (AMC) Brampton, Ontario Canada Pars Khodro, Tehran, Iran Cairo, Egypt (AAV) Türk-Willys Overland, Tuzla, Istanbul, Turkey Willys Overland do Brasil S.A, São Bernardo do Campo, São Paulo, Brazil
Body and chassis
Class	Compact sport utility vehicle
Body style	doorless / 2-door SUV doorless / 2-door convertible 2-door pickup truck
Layout	Front engine, rear-wheel drive / four-wheel drive
Chronology
Predecessor	Willys MB (For World War 2) Jeep Commando (For pickup version)
Successor	Jeep Wrangler Jeep Comanche (For pickup version)

The Jeep CJ models are a series and a range of small, open-bodied off-road vehicles and compact pickup trucks, built and sold by several successive incarnations of the Jeep automobile marque from 1945 through 1986. The 1945 Willys "Universal Jeep" was the world's first mass-produced civilian four-wheel drive car.

In 1944, Willys-Overland, the primary manufacturer of the World War II military Jeep, built the first prototypes for a commercial version – the CJ, short for "civilian Jeep".^[3] The design was a direct evolution from the war jeep, but the most obvious change was adding a tailgate, and relocating the spare wheel to the side. Also, besides adding basic civilian amenities and options and legally-compliant lighting, the CJ required a sturdier drivetrain than the war jeep, because the targeted rural buyers would work the vehicles hard and expect years of durability, instead of mere weeks as during WWII.

From then on, all CJ Jeeps consistently had a separate body and frame, rigid live axles with leaf springs both front and rear, a tapering nose design with flared fenders, and a fold-flat windshield, and could be driven without doors. Also, with few exceptions, they had part-time four-wheel drive systems, with the choice of high and low gearing, and open bodies with removable hard or soft tops. A few stand-out changes during 42 model years were the introductions of round-fendered vs. flat-fendered bodies (1955 CJ-5), straight-6 and V8-engines, automatic gearboxes, and different 4-wheel drive systems. The 1976 CJ-7 stretched the wheelbase by 10 inches (25 cm), and made doors and a removable hardtop common items.

After remaining in production through a range of model numbers, and several corporate parents, the Jeep CJ line was officially ended after 1986. More than 1.5 million CJ Jeeps were built, having continued the same basic body style for 45 years since the Jeep first appeared.^[2] Widely regarded as "America's workhorse", the CJs have been described as "probably the most successful utility vehicle ever made."^[4] American Motors VP Joseph Cappy said the end of "CJ production will signal an end of a very important era in Jeep history."^[5] In 1987, the Jeep CJ-7 was replaced by the first-generation Jeep Wrangler. Looking very similar and riding on the same wheelbase as the CJ-7, it carried over some important components, including its use of leaf springs.

The similar model the DJ "Dispatcher" was introduced in 1956 as a two-wheel drive version with open, fabric, or a closed steel body in both left- and right-hand drives for hotel, resort, police, and later United States Postal Service markets.^[6][7]

CJ-1

In 1942, the US Department of Agriculture tested the MB. By 1944, the Allies were confident the war would be won, and wartime production looked to be winding down. This allowed Willys to consider designing a Jeep for the postwar civilian market. Documentation is scarce, but in early 1944, Willys seemed to have found time to start drawing up plans, and one or two prototypes dubbed CJ(-1), for "Civilian Jeep", were running by May of that year. The first CJs had apparently been created by quick modification of the regular military MB, adding a tailgate, lower gearing, a drawbar, and a civilian-style canvas top. The first CJ served as a quick proof-of-concept test, and when a further design evolution materialized, probably became the CJ-1 by default.^[8] They were manufactured until the CJ-2s appeared, and they were the first Jeeps built from the ground up for civilian use.

No CJ-1s built have survived, and how many were made is unknown.^[9]

CJ-2

Although at least 40 were built, the Willys-Overland CJ-2 was not available for retail sale. The CJ-2s, also known as "AgriJeeps",^[11] were the second-generation prototypes for the first production civilian Jeep, and were used solely for testing purposes. Although their design was directly based on the military Willys MB, using the same Willys Go Devil engine — they were not only stripped of all military features, particularly the blackout lighting, but also the CJ-2s had many significant differences in body features and construction versus the military Jeep.^[8] They had tailgates, power take-offs, engine governors ($28.65),^[10] column-shift T90 manual transmissions, 5.38 gears, 2.43:1 low-range transfer cases, and driver's-side tool indentations. Rear wheelwells were redesigned so that seats could be enlarged, improved, and moved rearward, and new, more weathertight top designs were tried. A canvas half-top with roll-down doors was one of several top designs tried before production.^[8] The CJ-2 Go-Devil L-head engine was largely the same as the wartime Jeep, but used a different carburetor and ignition system.

The CJ-2s were built in two main batches, but even within the two groups, each was a little different, as they evolved and were modified for various types of work. For instance a number of experimental combinations of powertrain components were tested. Earlier models were dubbed “pilot models” because they still had so many differences from the production Jeeps. They were painted olive-drab, and had brass “JEEP” badges on the windshield base, the hood sides, and the rear. Some CJ-2s also had an "AgriJeep" plaque fixed to the dash. Later models were stamped "JEEP" and were painted in a few civilian colors that translated into the "WILLYS" stamping and the colors that appeared on the first production CJ-2A Jeeps built from 1945.^[8] The spare tire was mounted forward of the passenger-side rear wheel on the earlier models and aft of the rear wheel on later ones. The CJ-2s were likely distributed to "agricultural stations" for evaluation purposes.

Of the 40–45 CJ-2s built, serial numbers CJ2-03, CJ2-04, CJ2-06 (X30), CJ2-09 (X33), CJ2-11, CJ2-12, CJ2-14, CJ2-16, CJ2-26, CJ2-29, CJ2-32 (X56), CJ2-37 (X61), and CJ2-38 (X62)^[12] have survived, although some in very rough condition. CJ2-06 and CJ2-09 have been restored.^[8][9]

CJ-2A

Willys-Overland CJ-2A
Overview
Production	1945-1949 214,760 produced
Powertrain
Engine	134 cu in (2.2 L) L134 I4[13]
Transmission	3-speed Borg-Warner T-90 manual[13]
Dimensions
Wheelbase	80 in (2,032 mm) [14]
Length	130.1 in (3,305 mm) [15]
Width	59 in (1,499 mm) [16]
Height	69.4 in (1,763 mm) (top up) [16]
Curb weight	2,137 lb (969 kg) [16]

1946 Jeep CJ

1946 advertisement marketed the "Universal Jeep", not mentioning the CJ-2A type-code yet

Jeep demonstration for farming and industry – Netherlands, 1946

The lessons learned with the CJ-2 led to the development of the first full-production CJ, the 1945-1949 Willys-Overland CJ-2A, or Universal Jeep. A trademark for "AGRIJEEP" was granted in December 1944, but was not used.^[8] The CJ-2A looked very much like a civilianized MB with a tailgate and side-mounted spare wheel. A distinct difference between the MB and the CJ-2A lay in the grilles of the two vehicles. Where the MB had recessed headlights and nine-slot grilles, the CJ-2A had larger, slightly bulging headlights, flush-mounted in a seven-slot grille. While still powered by the reliable L-134 Go-Devil engine, the CJ-2A replaced the MB's T-84 transmission with a beefier T-90 three-speed.

Production of the CJ-2A started on 17 July 1945, sharing production time with the MB – roughly 9000 more MBs were produced through September 1945.^[17] Many of the early CJ-2As were produced using remaining stock of the military jeep components such as engine blocks, and in a few cases, modified frames. Up to serial no. 13453, the MB-style full floating rear axle was fitted. Once they were used up, the CJ got a stronger Dana / Spicer model 41.^[17] Sometimes the use of MB parts was due to strikes at suppliers, such as Autolite. Since Willys produced few parts in-house and relied heavily on suppliers, it was vulnerable to strikes. Unfortunately for Willys, strikes were common after the war, and this likely contributed to low production totals in 1945 and early 1946.

Since the CJ-2A was primarily intended for farming, ranching, and industrial applications, stock CJ-2As only came with a driver seat and driver side mirror, and a wide variety of options was available, such as: front passenger seat, rear seat, center rear-view mirror, canvas top, front power take-off (PTO), rear PTO, belt pulley drive, capstan winch, governor, rear hydraulic lift, snow plow, welder, generator,^[13] mower, disc, front bumper weight, heavy-duty springs, dual vacuum windshield wipers (stock CJ-2As were equipped with a manual wiper on the passenger side and a vacuum wiper on the driver side), dual taillights (stock CJ-2As had a taillight on the driver side and a reflector on the passenger side), hot-climate radiator, driveshaft guards, heater, side steps, and radiator brush guard.

The CJ-2As were produced in lively color combinations that in some ways symbolized the hope and promise of postwar America. True to their intended purpose, the combinations also resembled those used by the most popular farm equipment manufacturers of the day. From 1945 to mid-1946, CJ-2As were only available in two color combinations: Pasture Green with Autumn Yellow wheels and Harvest Tan with Sunset Red wheels. Additional color combinations added in mid-1946 were: Princeton Black with Harvard Red or Sunset Red wheels, Michigan Yellow with Pasture Green, Sunset Red or Americar Black wheels, Normandy Blue with Autumn Yellow or Sunset Red wheels, and Harvard Red with Autumn Yellow or Americar Black wheels. The Pasture Green and Harvest Tan combinations were dropped later in 1946. The Harvard Red combinations were dropped in 1947 and replaced with Picket Gray with Harvard Red wheels, and Luzon Red with Universal Beige wheels. In 1948, these color combinations were also added: Emerald Green with Universal Beige wheels, Potomac Gray with Harvard Red or American Black wheels. For 1949, the Picket Gray, Michigan Yellow, and Normandy Blue combinations were dropped. Olive drab was also available for export models.

On early CJ-2As, the front seats were covered in olive-drab vinyl. Around mid-1947, Slate Gray vinyl became available for certain color combinations. Later, Barcelona Red was added to the mix.

A total of 214,760 CJ-2As were produced. Because of the use of military production parts on the earliest CJ-2As, and the many changes made during its early production, restorers and collectors refer to CJ-2As up to around serial no. 34,530 as "Very Early Civilian" and from mid-1946 to about mid-1947 as "Early Civilian". Only minor changes were made after the mid-1947 models.^[17]

CJ-3A

Willys-Overland CJ-3A
Overview
Production	1949-1953 131,843 produced
Body and chassis
Related	Willys M38
Powertrain
Engine	134 cu in (2.2 L) L134 I4[13]
Transmission	3-speed Borg-Warner T-90 manual
Dimensions
Wheelbase	80 in (2,032 mm) [13]
Length	129.8 in (3,297 mm) [18]
Width	57.1 in (1,450 mm) (body) [19] / 63.1 in (1,603 mm) with spare tyre
Height	66.4 in (1,687 mm) windshield up [19]

Jeep with plow attachment in 1949 matchbook cover art

The Willys-Overland CJ-3A was introduced in 1949, and was in production until 1953, when replaced by the CJ-3B. It was powered by Willys' 60 hp (45 kW; 61 PS) L-134 Go-Devil four-cylinder engine, with a T-90 transmission and Dana 18 transfer case, a Dana 25 front axle and Dana 41 or 44 rear axle. It featured a one-piece windshield with a vent, and wipers at the bottom. The CJ-3A had beefed-up suspension (10 leaf) to accommodate the various agricultural implements that were being built for the vehicle.^[20] Another difference was a shorter rear wheelwell (the wheelwell from the top front edge to the rear of the body is 32 in (810 mm) on the 3A compared to 34 in (860 mm) on the 2A) and moving the driver's seat rearward.^[21] As of 1951, a Farm Jeep and a Jeep Tractor version were offered; the latter was very bare-bones, for field use only, and featured a power takeoff.^[22]

1951 CJ-3A military version

In total, 131,843 CJ-3As were produced before the series ended in 1953. About 550 of the CJ3-As were assembled by Mitsubishi as the J1/J2 in late 1952 and early 1953, exclusively for the Japanese police and forestry agency.^[23]

Zamboni Model B ice resurfacer mounted on a Jeep CJ

The CJ-3A-derived military jeep was the Willys MC (or M38), and it began complementing the Ford and Willys World War II jeeps starting in 1949.

The CJ-3A, along with the later CJ-3B and CJ-5, was used as a platform for early models of the Zamboni Company's ice resurfacer produced from 1950 to 1964, which were mounted on top of the Jeeps to clean and smooth the surface of ice rinks. Zamboni resurfacers would be constructed using original chassis designs starting in 1964, thereby eliminating the need for Jeep parts on new machines.^[24][25][26]

CJ-4

The Willys-Overland CJ-4 or "X-151" was only built as an experimental concept in 1950 or 1951.^[27] It used the new Willys Hurricane engine and had an 81 in (2,057 mm) wheelbase. The CJ-4 body tub was an intermediate design between the straightforward raised hood from the CJ-3B and the all new curved body style of the CJ-5. The design was rejected and the vehicle was eventually sold to a factory employee.^[28]

Evidence has surfaced, that derived prototypes called CJ-4M and CJ-4MA (XM170) have also been seriously considered, as precursors to the 1951 M38A1 and M170 military Jeeps. Although the CJ-4M prototype may not have been actually built,^[29] the stretched wheelbase ambulance prototype with registration "CJ-4MA-01" turned up in 2005.^[30]

CJ-3B

Willys CJ-3B
Overview
Production	1953-1968
Body and chassis
Related	Willys M606
Powertrain
Engine	134 cu in (2.2 L) Hurricane I4
Dimensions
Wheelbase	80 in (2,032 mm)[31]
Length	129.875 in (3,299 mm)[13]

The Willys CJ-3B replaced the CJ-3A in 1953, the same year Willys-Overland was bought by Kaiser Motors. The Kaiser parent company removed "Overland" from the Willys Motors subcompany name. The CJ-3B introduced a higher grille and hood to clear the new Willys Hurricane engine. A four-speed manual transmission became optional in 1963, at an extra cost of $194 (~$1,854 in 2022).^[13] The turning radius was 17.5 ft (5.3 m).^[32] Until 1968, about 196,000 CJ-3Bs were produced, of which 155,494 were assembled in the U.S.^[33][34]

The CJ-3B was turned into the M606 military jeep (mostly used for export, through 1968) by equipping it with commercially available heavy-duty options, such as larger tires and springs, and by adding black-out lighting, olive drab paint, and a trailer hitch. Shipments of the M606 militarized version of the Jeep CJ-3B, exported for military aid under the Mutual Defense Assistance Program, accounted for a substantial percentage of the limited CJ-3B production in the 1960s.^[33]

Mitsubishi Jeep

Mitsubishi Jeep J-series
Overview
Manufacturer	Mitsubishi Motors
Production	1953-1998
Assembly	Pajero Manufacturing Co., Ltd, Sakahogi, Gifu, Japan
Body and chassis
Body style	2-door SUV 2-door convertible 4-door station wagon
Layout	Front engine, four-wheel drive
Powertrain
Engine	2.0 L 4G52 I4 2.2 L JH4 I4 2.4 L 4G53 I4 2.2 L KE31 diesel I4 2.7 L 4DR5 diesel I4
Dimensions
Wheelbase	2,030 mm (80 in) 2,255 mm (88.8 in) 2,640 mm (104 in)
Length	3,390–4,330 mm (133–170 in)
Chronology
Successor	Mitsubishi Pajero

The Jeep was introduced to the Japanese market as the Jeep J3 in July 1953 after Willys agreed to allow Mitsubishi to market the car, competing with the Nissan Patrol and the Toyota Land Cruiser.^[38] The name wasn't in reference to "CJ3", but rather denoted the fact that 53 "J1"s (CJ-3A with 6-volt electrics) had been built for the Japanese regional forest office and around 500 "J2"s (CJ-3A with 12-volt electrics) were built for the National Safety Forces.^[23] Mitsubishi continued knock-down production of vehicles derived from the CJ-3B design until August 1998, when tighter emissions and safety standards finally made the Jeep obsolete. In total, about 200,000 units were built in this 45-year period.^[39] Short, medium, and long wheelbases were available, as well as a variety of bodystyles, and gasoline and diesel engines.^[40] In Japan, it was sold at a specific retail chain called Galant Shop. The Japanese GSDF refers to them as Type 73 Light Truck.

Mitsubishi Jeep Delivery Wagon J37

The original J3 was a basic, doorless, and roofless version, with steering on the left, rather than the right, despite Japan having left-side traffic. The first right-hand drive versions did not appear until nearly eight years later (J3R/J11R). The original J3 and its derivatives were equipped with the 2.2 L (2,199 cc) F-head "Hurricane" (called JH4 by Mitsubishi, for Japanese Hurricane 4-cylinder) inline four-cylinder, originally producing 70 PS (51 kW; 69 hp) at 4,000 rpm.^[41] In 1955 a slightly longer wheelbase J10 which could seat six was added, and in 1956 the J11 appeared, a two-door "delivery wagon" with a full metal body. This was considerably longer, at 433 cm (170 in) versus 339 cm (133 in) for the J3.

Local production of the JH4 engine commenced in 1955. A locally developed diesel version (KE31) was introduced for the JC3 in 1958, originally with 56 PS (41 kW) at 3,500 rpm but with 61 PS (45 kW; 60 hp) at 3,600 rpm a few years later.^[41] Later versions used 4DR5 and 4DR6 (J23 turbo) 2.7 liter overhead-valve diesel engines. The final military version J24A produced 135PS from an improved 4DR5 engine with front-mounted air-to-air intercooler.

By 1962, the output of the gasoline JH4 engine had crept up to 76 PS (56 kW; 75 hp). By the time of the introduction of the longer J20 in 1960, a six-seater like the J10, but with a differently configurated (more permanent) front windshield, as well as available metal doors, Mitsubishi had also added small diagonal skirts to the leading edge of the Jeep's front fenders. This remained the last change to the sheetmetal up front until the end of Mitsubishi Jeep production in 1998.

Later models include 2-L, short-wheelbase, soft-top J58 (J54 with a diesel engine), and the J38 gasoline wagon on the longest wheelbase.^[42] The last iteration of the Japanese Jeeps was the J53 with diesel turbo engine.

CJ-5

Willys CJ-5/Jeep CJ-5
Overview
Also called	Ford Jeep (Brazil)[43] Jeep Shahbaz (Iran, Pars Khodro)[44] Shinjin Jeep (South Korea)[45]
Production	1954-1983 603,303 produced [46]
Model years	1955-1983
Body and chassis
Related	Jeep DJ-5 Willys M38A1
Powertrain
Engine	134 cu in (2.2 L) Willys Hurricane I4 192 cu in (3.1 L) Perkins 4.192 I4 diesel 225 cu in (3.7 L) Dauntless V6 151 cu in (2.5 L) Iron Duke I4 232 cu in (3.8 L) AMC I6 258 cu in (4.2 L) AMC I6 304 cu in (5.0 L) AMC V8
Transmission	three-speed manual four-speed manual
Dimensions
Wheelbase	81 in (2,057 mm) (1954-1971)[13] 83.5 in (2,121 mm)[47] (1972-1983)
Length	138.2 in (3,510 mm)
Width	68.5 in (1,740 mm)
Height	67.7 in (1,720 mm)
Curb weight	2,665 lb (1,209 kg)[48]

The Willys CJ-5 (after 1964 Jeep CJ-5) was influenced by new corporate owner, Kaiser, and the Korean War M38A1 Jeep. It was intended to replace the CJ-3B, but that model continued in production. The CJ-5 repeated this pattern, continuing in production for three decades while three newer models appeared. "The CJ-5 has the distinct honor of being a vehicle that was hard to kill off... equaling the longest production run of note."^[49]

1965 Jeep CJ5-A Tuxedo Park Mark IV half cab

Willys M38A1

From 1961 to 1965, optional for the CJ-5 and CJ-6 was the British-made Perkins 192 cu in (3.15 L) Diesel I4 with 62 hp (46 kW) at 3,000 rpm and 143 lb/ft (213 kg/m) at 1350 rpm.^[50]

In 1965, Kaiser bought license to produce the Buick 225 cu in (3.7 L) V6 Dauntless engine, to offer the new 155 hp (116 kW) option on the CJ-5 and CJ-6, countering complaints that the 75 hp four-cylinder Willys Hurricane engine was underpowered. Power steering was an $81 option.^[13] The V6 engine proved so popular, by 1968, some 75% of CJ-5s were sold with it.^[51]

CJ-5 with the "Jeep-A-Trench" accessory

Kaiser Jeep was sold to American Motors Corporation (AMC) in 1970, and the Buick engine was retired after the 1971 model year. (GM's Buick division repurchased the engine tooling in the early 1970s which served as the powerplant in several GM vehicles.) The "Trac-Lok" limited-slip differential replaced the "Powr-Lok" in 1971, and PTOs were no longer available after that year.^[52] AMC began marketing the Jeep less as a universal utility vehicle, and more as a sporty one, notably increasing its performance and features.

1972 Revamp
The 1972 model year brought significant changes to the CJ-5. American Motors began fitting their own engines, which also required changes to both body and chassis. The base Willys 4-cylinder was replaced by AMC's Torque Command straight-6 engines, giving the entry-level CJ-5 the power of the previously optional Buick V6. Standard became the 232 cu in (3.8 L), and optional the 258 cu in (4.2 L), which was standard in California. Both engines used a one-barrel Carter YF carburetor. Also in 1972, AMC's 304 cu in (5.0 L) V8 engine became available, which upgraded the power-to-weight ratio to a level comparable to a V8 muscle-car. Other drive-train changes included a new front axle - a full-floating, open-knuckle Dana 30, which was both 25 lbs lighter and reduced the turning circle by 6 ft.

To accommodate the new engines, the wheelbase was stretched by 2.5 in (64 mm), and the fenders and hood were stretched by 5 in (127 mm).^[51][53] A new box-frame was fitted, featuring six cross-members for more rigidity.^[54] Also, a larger fuel tank was mounted, moved from under the driver's seat to under the rear, between the frame rails.^[55]

A dealer-installed radio became available in 1973, air conditioning became available via dealership in 1975. Electronic, breakerless distributors replaced breaker-point Delco distributors for the full engine line-up, and a catalytic converter was added to models equipped with the 304 V8.^[56]

In 1975, for the 1976 model year, the tub and frame were modified from earlier versions. The frame went from a partially open channel/boxed frame with riveted crossmembers, to majoritively boxed with welded crossmembers, and from parallel rails to widening fore to aft to benefit stability.^[57] and the body tub became more rounded. The windshield frame and windshield angle were also changed, meaning that tops from 1955 to 1975 will not fit a 1976-1983 CJ-5 and vice versa. The rear axle was also changed in 1976 from a Dana 44 to an AMC-manufactured model 20 that had a larger-diameter ring gear, but used a two-piece axleshaft/hub assembly instead of the one-piece design used in the Dana.

For 1977, the frame was modified again to a completely boxed unit. Power disc brakes and the "Golden Eagle" package (which included a tachometer and clock) were new options,^[13] as well as air conditioning.^[56]

In 1979, the standard engine became the 258 cu in (4.2 L) I6 that now featured a Carter BBD two-barrel carburetor.

From 1980 to 1983, the CJ-5 came standard with a "Hurricane"-branded version of the GM Iron Duke I4 with an SR4 close-ratio, four-speed manual transmission. The 258 cu in (4.2 L) AMC straight-6 engine remained available as an option, but the transmission was changed from the Tremec T-150 three-speed to a Tremec T-176 close-ratio four-speed. The Dana 30 front axle was retained, but the locking hubs were changed to a five-bolt retaining pattern versus the older six-bolt.

The demise of the AMC CJ5 model has been attributed to a December 1980 60 Minutes segment where the Insurance Institute for Highway Safety (IIHS) staged a demonstration to illustrate that the CJ5 was apt to roll over "in routine road circumstances at relatively low speeds." Years later, it was revealed the testers only managed to achieve eight rollovers out of 435 runs through a corner. The IIHS requested the testers implement "vehicle loading" (hanging weights in the vehicle's corners inside the body, where they were not apparent to the camera) to generate worst-case conditions for stability.^[58]

Special CJ-5 versions

• 1961 Tuxedo Park
• 1962 Tuxedo Park Mark II
• 1963 Tuxedo Park Mark III
• 1964 Tuxedo Park Mark IV

The early Tuxedo Park models were trim lines designed to make the CJ "more comfortable and appealing to the general public."^[59] However, the Tuxedo Park Mark IV was claimed as a separate model from the other CJ series (marked in 1965 as the "Universal"), with more differences than past models. The Tuxedo Park Mark IV was an attempt to crack the mass market; it was, according to Jeep, “a new idea in sports cars ... the sportiest, most FUNctional car on the automotive scene."^[60] It added to the standard CJ chrome-plated bumpers, hood latches, gas cap, mirror, and tail lamp trim. Two wheelbases, 81 in (2,057 mm) and 101 in (2,565 mm), were available, with a variety of convertible top and seat colors, and front bucket seats upholstered in "pleated British calf-grain vinyl". Sales of this model, introduced in 1965, were low.^[60]

• 1969-1970 Camper

From 1969 Kaiser-Jeep offered a camper for the CJ-5 as a factory option, but also available separately, as it would fit any CJ-5 made since 1955. The camper mounted in the "bed" of the CJ-5, extended well beyond the back of the car, and had another axle of its own, that carried most of the weight. It also extended above the front seats of a CJ-5, which is where the main sleeper was located.^{[61][62][63][64][65][66]} When AMC bought Kaiser-Jeep in 1970, they ended the Jeep camper option. With only 336 produced, the Jeep Camper is one of the rarest commercial RV models ever.^[62]

• 1969 462

The 1969 Universal offered a "462" performance package. It was a limited-production model that featured the V6 engine, front bucket seats and a rear bench, roll bar, heavy-duty frame and springs, a locking differential, oil-pan skid plate, rear swing-out tire carrier, full wheel covers, ammeter, and oil pressure gauges; padded visors were optional.^[67]

1974 Jeep CJ-5 Renegade

• 1970 Renegade I

The 1970 "Renegade I" models continued the features of the "462" package, along with special hood trim stripes and limited colors. Renegade I production for 1970 is estimated between 250 and 500 units equipped with all of the previous performance upgrades along with a simple black stripe on the sides of the hood, new 8-inch wide white road wheels with G70x15 tires, and offered in only two bright colors: Wild Plum and Mint Green.^[68] Note that there may have been other colors produced including a pale yellow produced in October of 1969.

• 1971 Renegade II

The 1971 "Renegade II" continued the previous year's features with bright alloy road wheels (replacing the painted steel units), the addition of a black center hood stripe, and new color selections: about 200 were painted Baja Yellow, 200 Mint Green, 50 Riverside Orange, and 150 finished in Big Bad Orange, the same paint as available on the "Big Bad" AMC AMX and Javelin.^[69] AMC design studios proposed a striping scheme for a Renegade III model for the 1972 model year, but because of their popularity, the Renegade became a regular production appearance package option.^[70]

• 1972-1983 Renegade

The 1972 "Renegade" was available from 1972 to 1983 with AMC's 304 cu in (5.0 L) V8 engine, alloy wheels, and a Trac-Lok limited-slip differential.

1979 Jeep CJ Silver Anniversary edition, lengthened nose as compared to pre-1972 models

• 1973 Super Jeep

Only produced in 1973, the Super Jeep was an appearance package created because of a shortage of aluminum wheels needed for the CJ-5 Renegade versions. Only a few hundred were built.^[71]

• 1977-1983 Golden Eagle

From 1977 to 1983, the Golden Eagle package came with a soft-top or hard-top option, power disc brakes, power steering, tachometer, 304 CID V8, air conditioning, side steps, and Golden Eagle decals.^[54]

• 1979 Silver Anniversary^[72]

The 1979 Silver Anniversary edition was a limited-edition version (1000 units) of the Renegade model marketed to celebrate 25 years of the CJ-5. Features included a special "Quick Silver" metallic paint, black to silver accent body striping and special Renegade decals on the hood sides, black soft top, special spare tire cover, black vinyl bucket seats, and a dashboard plaque noting the CJ's production from 1954 to 1979.^[72][73]

• 1980 Golden Hawk — a 1980-only sticker package for CJ-5, CJ-7 and Cherokee.
• 1980-1983 Laredo

Brazil

1961 Willys Jeep 101 4 portas (aka "Bernardao")

1963 Brazilian-built CJ-5

While most foreign assemblers focused on the CJ-3B, Brazil received the CJ-5, instead. After having closed their market to imported cars in 1954, assembly of the "Willys Jeep Universal" (as it was known in Brazil) from CKD kits began in 1957.^[43] By 1958, production relied on locally sourced components, with the vehicles equipped with a 90 hp (67 kW) 2.6 liter I6 engine (also used by Willys do Brasil for passenger cars). The Universals came with a three-speed manual transmission. The Brazilian-built vehicles are easily recognized by their squared-off rear wheel openings. In 1961, a long-wheelbase version, similar to the CJ-6, was added to the line. Called the "Willys Jeep 101", it shared the chassis of the local Rural, a redesigned Willys Jeep Station Wagon. Like the Brazilian-made CJ5s, the 101 has square rear-wheel openings.^[43] This version was introduced in 1961, but was not retained after Ford's takeover in the fall of 1967. On 9 October 1967, Ford do Brasil bought the Brazilian Willys subsidiary and took over the production of the CJ-5, the Willys Jeep Station Wagon-based "Rural", and its pick-up truck version. Ford kept the line with no modifications except for some Ford badges on the sides and on the tailgate.^[43] In 1976, Ford equipped the CJ-5 and the Rural with the locally built version of the 2.3-L OHC four-cylinder engine used in the Ford Pinto (also used in the Brazilian Maverick) and a four-speed manual transmission. This engine produced 91 PS (67 kW; 90 hp) (SAE) at 5000 rpm.^[75] In 1980, the engine was modified to run on Neat ethanol fuel (E100); this option lasted until 1983, when Ford ended the production of the CJ-5 in Brazil.^[43]

CJ-6

Willys CJ-6/Jeep CJ-6
Overview
Production	1955-1981
Body and chassis
Related	Willys M170
Powertrain
Engine	134 cu in (2.2 L) Willys Hurricane I4 225 cu in (3.7 L) Dauntless V6 151 cu in (2.5 L) GM Iron Duke I4 232 cu in (3.8 L) AMC I6 258 cu in (4.2 L) AMC I6 304 cu in (5.0 L) AMC V8 192 cu in (3.1 L) Perkins 4.192 I4 diesel
Dimensions
Wheelbase	101 in (2,565 mm) (1955-1971) 103.5 in (2,629 mm) (1972-1981)

Introduced in 1953 as the M170 military version, the civilian CJ-6 made its debut in 1955 as a 1956 model. It was stretched version of the CJ-5 with a 20 in (508 mm) longer-wheelbase (101 in, 1955-1971 / 103.5 in, 1972–1981).^[76] The extended chassis allowed a variety of configurations, including adding a second row of seats. The M170 military version shared many of the features of the M38A1 (Military CJ-5), but had the passenger-door opening extended back to the rear wheel well. As in the CJ-5, the V6 and V8 engine choices appeared in 1965 and 1972.

The U.S. Forest Service put of CJ-6 Jeeps into use. American sales ended after 1975, with the introduction of the CJ-7. A total of 50,172 were produced when the series went out of production in 1981.^[46]

Never very popular in the United States, most CJ-6 models were sold to Sweden and South America. It was also assembled in South Africa, by Volkswagen's local subsidiary,^[77] and in Israel by Kaiser in Haifa and later by Israel automobile industries in Nazareth.^[78] In Brasil, a local 4 door option existed for the 1963 model, called Jeep Universal 101 Bernardão 4 portas

M170

M170, right side showing larger opening that extends from the cowl back to the rear wheel.

1975 Jeep CJ-6 fire engine.

CJ-6, right side showing smaller opening similar to other CJ models and shorter than on the M170.

CJ-5A and CJ-6A

From 1964 to 1968, Kaiser elevated the Tuxedo Park from just a trim package to a separate model for the CJ-5A and CJ-6A. A Tuxedo Park Mark IV is signified by a different prefix from a normal CJ-5 with a VIN prefix of 8322 and a CJ6a is 8422, while a normal CJ-5 VIN prefix is 8305 from 1964 to 1971.

CJ-7

Jeep CJ-7
Overview
Model years	1976-1986
Body and chassis
Related	SsangYong Korando
Powertrain
Engine	150 cu in (2.5 L) AMC I4 151 cu in (2.5 L) Iron Duke I4 232 cu in (3.8 L) AMC I6 258 cu in (4.2 L) AMC I6 304 cu in (5.0 L) AMC V8 145 cu in (2.4 L) Isuzu C240 I4 diesel
Transmission	3-speed automatic 3-speed manual 4-speed manual 5-speed manual
Dimensions
Wheelbase	93.3 in (2,370 mm)
Length	148 in (3,759 mm)
Width	68.5 in (1,740 mm)
Height	67.7 in (1,720 mm)
Curb weight	2,707 lb (1,228 kg)[79]
Chronology
Successor	Jeep Wrangler YJ

The Jeep CJ-7 featured a wheelbase 10 inches longer than that of the CJ-5, with its curved side entry cutouts partially squared up to accommodate hinged doors. The other main difference between CJ-5 and CJ-7 was to the chassis, which consisted of two parallel longitudinal main c-section rails. To help improve vehicle handling and stability, the rear section of the chassis stepped out to allow the springs and shock absorbers to be mounted closer to the outside of the body. It was introduced for the 1976 model year, with a total of 379,299 built during eleven years of production.^[46]

Transmission options included the standard part-time two-speed transfer case, automatic, and an optional new automatic all-wheel drive system called Quadra-Trac. Other features included an optional molded hardtop and steel doors. The CJ-7 was also available in Renegade and Laredo models. Distinguished by their different body decals, the Laredo model featured highback leather bucket seats, a tilting steering wheel, and a chrome package that included the bumpers, front grill cover, and side mirrors. An optional Trak-Lok rear differential was available, too.

The reports of the CJ-7 were different in each type of engine: the 145 cu in (2.4 L) diesel was mated to the 4.10 ratio axle (in both Renegade and Laredo), while the 258 cubic-inch straight six and 150 cubic-inch four-cylinder used 3.73 and AMC V8 304-powered models (produced 1976–1981, which became part of the Golden Eagle version) used the 3.55 ratio axles.

A diesel-powered version was made in the Ohio factory for export only. The engines were provided by General Motors, the owners of Isuzu Motor Cars. Production of this diesel version was between 1980 and 1982. This model had the Isuzu C240 engine, T176 transmission, and Dana 300 transfer case, although reports of some being produced with the Dana 20 exist. Typically, they had 4.1-ratio, narrow-track axles.

From 1976 through 1980, the CJ-7 came equipped with a Dana 20 transfer case, Dana 30 front axle (27- or 31-spline), and a 29-spline AMC 20 rear axle, while in later years, Laredo packages added a tachometer, chrome bumpers, tow hooks, and interior upgrades including leather seats and clock. In 1980, the Laredo was first fitted with an AMC 20 rear axle until mid-1986, when it was equipped with a Dana 44, and all 1980 and newer CJ-7s came with the Dana 300 transfer case.

The Canadian Army took delivery of 195 militarized versions of the CJ-7 in 1985. These were put into service as a stop-gap measure between the retirement of the M38A1 and the introduction of the Bombardier Iltis. They were codified by the Canadian Forces with the Equipment Configuration Code number 121526.

The CJ-7 continues to be used in the sport of mud racing, with either the stock body or a fiberglass replica. CJ-7 has been successfully and widely used as a favorite for rock crawling, through simple and complex modification. These last Jeeps produced were also highlighted with a factory dash plaque that read, "Last of a Great Breed - This collectors-edition CJ ends an era that began with the legendary Jeep of World War II".

1982 Jamboree Edition #0152 — Topaz Gold Metallic

1982 Jamboree Edition #0693 — Olympic White

Jeep Renegade

During 11 years of production, the CJ-7 had various common trim packages:

• 1976-1986 Renegade (2.4D L6-2.5-4.2-5.0 AMC 304 V8)
• 1976-1980 Golden Eagle (5.0 AMC 304 V8)
• 1980 Golden Hawk (5.0 AMC 304 V8)
• 1980-1986 Laredo (2.4D-4.2 I6)

Jeep also produced two special edition CJ-7 packages:

• 1982-1983 Limited (2,500 units were built as a limited-production luxury model; 4.2 L I6 with T5 or automatic transmissions)
• 1982 Jamboree Commemorative Edition (630 numbered units built for the 30th anniversary of the Rubicon Trail;^[80] 4.2L).  with only 630 units produced (560 Topaz Gold Metallic and 70 Olympic White), the CJ-7 Jamboree is the rarest CJ-7 ever built and one of the rarest Jeeps of all time. The Jamboree is in the same production rarity class as the 1971 CJ-5 Renegade-II. It is the most heavily optioned CJ ever built; it was the Rubicon of its day. All units were uniquely numbered via a dash plaque; it is the only AMC Jeep to have been numbered.^[80]

Engines

• 150 cu in (2.5 L) AMC I4
• 151 cu in (2.5 L) GM Iron Duke I4
• 232 cu in (3.8 L) AMC I6
• 258 cu in (4.2 L) AMC I6 99.4 PS (73 kW; 98 hp), 261 N⋅m (193 lb⋅ft)
• 304 cu in (5.0 L) AMC V8 127 PS (93 kW; 125 hp), 296 N⋅m (218 lb⋅ft)^[79]
• 145 cu in (2.4 L) Isuzu Diesel C240

Transmissions

• Warner T-18 (four-speed with a Dana 20 1976-1979) (aftermarket adapters exist for a dana 300, but it was not a factory option) (also known as a three-speed with granny gear)
• Borg-Warner T-4 (four-speed with a Dana 300)
• Borg-Warner T-5 (five-speed with a Dana 300)
• Tremec T-150 (three-speed manual transmission with a Dana 20 1976-1979)
• Tremec T-176 (four-speed manual with a Dana 300)
• Borg-Warner SR-4 (four-speed with a Dana 300)
• GM TH-400 (three-speed automatic with BW QuadraTrac #1339)
• TF-999 (three-speed automatic transmission - 4.2 L with a Dana 300)
• TF-904 (three-speed automatic transmission - 2.5 L with a Dana 300)

Transfer cases

• Dana 20 (1976–79)
• Dana 300 (1980–86)
• Borg-Warner #1339 (1976–1979)

Axles

• Dana 30 Front narrow track (1976–1981)
• Dana 30 Front wide track (1982–1986)
• 2-Piece AMC 20 Narrow track rear (1976–1981)
• 2-Piece AMC 20 Narrow track offset differential rear (1976–1979) only for QuadraTrac #1339-equipped vehicles
• 2-Piece AMC 20 Wide track rear (1982–1986)
• Dana 44 Wide track rear (mid-year 1986)

Scrambler (CJ-8)

Jeep Scrambler (CJ-8)

The CJ-8, officially referred to as the Jeep Scrambler, was a long-wheelbase version of the CJ-7, introduced in 1981 and manufactured through 1986. It featured a 103.5 in (2,629 mm) wheelbase^[76] and a removable half cab, creating a small pick-up style box instead of using a separate pickup bed. Scramblers used the traditional transfer case with manual front locking hubs to engage the four-wheel drive. Most had either a four- or five-speed manual transmission, but a three-speed automatic transmission was an option. The Scrambler would be discontinued in 1986 and effectively replaced by the Cherokee-based Comanche. Former President Ronald Reagan owned a Scrambler and used it on his California ranch.^[81]

CJ-10

Jeep CJ-10
Overview
Also called	Jeep One-Tonner[85] Jeep J10[85]
Production	1981-1985
Assembly	United States: South Bend, Indiana[85] Mexico: Toluca, Mexico State (Vehículos Automotores Mexicanos)[85]
Body and chassis
Body style	2-door pickup truck
Powertrain
Engine	151 cu in (2.5 L) AMC I4[85] 198 cu in (3.2 L) Nissan SD33 I6 diesel[85] 258 cu in (4.2 L) AMC I6[85]
Transmission	three-speed TorqueFlite A727 automatic[85] 4-speed Tremec T177 manual[85]
Dimensions
Wheelbase	119.8 in (3,040 mm)[86][87]
Length	191 in (4,850 mm) cab & chassis [86] 196 in (4,980 mm)[87] with the utility box and rear bumper[86]
Width	68 in (1,730 mm)[86][87]
Height	72 in (1,830 mm)[86][87]
Curb weight	4,300 lb (2,000 kg)[85]

The Jeep CJ-10 was a CJ-bodied pickup truck based on a heavily modified Jeep J10 pickup truck.^[85] Produced from 1981 to 1985, it was sold and designed for export markets, Australia in particular.^[85] They featured rectangular headlights mounted in the fenders and a ten-slot grille, where all other CJ Jeeps had a seven-slot grille. The CJ-10 could have either a hard or soft top. The truck could be equipped to handle either a 5,900 lb (2,700 kg) or 6,700 lb (3,000 kg) GVW. Three engines were offered; a 198 cu in (3.2 L) six-cylinder Nissan-built diesel engine, a 151 cu in (2.5 L) four-cylinder AMC-built engine, or a 258 cu in (4.2 L) six-cylinder AMC-built engine. The driveline was largely from the larger J series pickups, consisting of either a four-speed Tremec T177 manual transmission or a three-speed TorqueFlite A727 automatic transmission, a New Process 208 transfer case, a Dana 44 front axle, and either a semi-floating Dana 44 or Dana 60 rear axle, depending on GVW rating.^[85] Importation of the CJ-10 into Australia ended in 1985 with the drop of the Australian dollar's value, causing the vehicle to be significantly more costly than its competitors.^[85]

CJ-10A

The Jeep CJ-10A was a CJ-10-based flightline aircraft tug. Produced in Mexico from 1984 to 1986, it was used by the United States Air Force as an aircraft-tug. It was a 4x2 bobtail design.^[85] About 2,300 were produced.

References

External links

Wikimedia Commons has media related to Jeep CJ.

• Jeep 1970 - 1986 sales & accessories brochures
• Jeep CJ at the Internet Movie Cars Database
• Historic American Engineering Record (HAER) No. CA-2320, "1962 Willys 'Jeep' CJ-6, Ronald Reagan Center, 217 State Street, Santa Barbara, Santa Barbara County, CA", 2 measured drawings