In numerical analysis, the ITP method, short for Interpolate Truncate and Project, is the first root-finding algorithm that achieves the superlinear convergence of the secant method^[1] while retaining the optimal^[2] worst-case performance of the bisection method.^[3] It is also the first method with guaranteed average performance strictly better than the bisection method under any continuous distribution.^[3] In practice it performs better than traditional interpolation and hybrid based strategies (Brent's Method, Ridders, Illinois), since it not only converges super-linearly over well behaved functions but also guarantees fast performance under ill-behaved functions where interpolations fail.^[3]

The ITP method follows the same structure of standard bracketing strategies that keeps track of upper and lower bounds for the location of the root; but it also keeps track of the region where worst-case performance is kept upper-bounded. As a bracketing strategy, in each iteration the ITP queries the value of the function on one point and discards the part of the interval between two points where the function value shares the same sign. The queried point is calculated with three steps: it interpolates finding the regula falsi estimate, then it perturbes/truncates the estimate (similar to Regula falsi § Improvements in regula falsi) and then projects the perturbed estimate onto an interval in the neighbourhood of the bisection midpoint. The neighbourhood around the bisection point is calculated in each iteration in order to guarantee minmax optimality (Theorem 2.1 of ^[3]). The method depends on three hyper-parameters ${\displaystyle \kappa _{1}\in (0,\infty ),\kappa _{2}\in \left[1,1+\phi \right)}$ and ${\displaystyle n_{0}\in [0,\infty )}$ where ${\displaystyle \phi }$ is the golden ratio ${\displaystyle {\tfrac {1}{2}}(1+{\sqrt {5}})}$: the first two control the size of the truncation and the third is a slack variable that controls the size of the interval for the projection step.^{[lower-alpha 1]}

Root finding problem

Given a continuous function ${\displaystyle f}$ defined from ${\displaystyle [a,b]}$ to ${\displaystyle \mathbb {R} }$ such that ${\displaystyle f(a)f(b)\leq 0}$, where at the cost of one query one can access the values of ${\displaystyle f(x)}$ on any given ${\displaystyle x}$. And, given a pre-specified target precision ${\displaystyle \epsilon >0}$, a root-finding algorithm is designed to solve the following problem with the least amount of queries as possible:

Problem Definition: Find ${\displaystyle {\hat {x}}}$ such that ${\displaystyle |{\hat {x}}-x^{*}|\leq \epsilon }$, where ${\displaystyle x^{*}}$ satisfies ${\displaystyle f(x^{*})=0}$.

This problem is very common in numerical analysis, computer science and engineering; and, root-finding algorithms are the standard approach to solve it. Often, the root-finding procedure is called by more complex parent algorithms within a larger context, and, for this reason solving root problems efficiently is of extreme importance since an inefficient approach might come at a high computational cost when the larger context is taken into account. This is what the ITP method attempts to do by simultaneously exploiting interpolation guarantees as well as minmax optimal guarantees of the bisection method that terminates in at most ${\displaystyle n_{1/2}\equiv \lceil \log _{2}((b_{0}-a_{0})/2\epsilon )\rceil }$ iterations when initiated on an interval ${\displaystyle [a_{0},b_{0}]}$.

The method

Given ${\displaystyle \kappa _{1}\in (0,\infty ),\kappa _{2}\in \left[1,1+\phi \right)}$, ${\displaystyle n_{1/2}\equiv \lceil \log _{2}((b_{0}-a_{0})/2\epsilon )\rceil }$ and ${\displaystyle n_{0}\in [0,\infty )}$ where ${\displaystyle \phi }$ is the golden ratio ${\displaystyle {\tfrac {1}{2}}(1+{\sqrt {5}})}$, in each iteration ${\displaystyle j=0,1,2\dots }$ the ITP method calculates the point ${\displaystyle x_{\text{ITP}}}$ following three steps:

Step 1 of the ITP method.

Step 2 of the ITP method.

Step 3 of the ITP method.

All three steps combined form the ITP method. The thick blue line represents the "projected-truncated-interpolation" of the method.

1. [Interpolation Step] Calculate the bisection and the regula falsi points: ${\displaystyle x_{1/2}\equiv {\frac {a+b}{2}}}$ and ${\displaystyle x_{f}\equiv {\frac {bf(a)-af(b)}{f(a)-f(b)}}}$ ;
2. [Truncation Step] Perturb the estimator towards the center: ${\displaystyle x_{t}\equiv x_{f}+\sigma \delta }$ where ${\displaystyle \sigma \equiv {\text{sign}}(x_{1/2}-x_{f})}$ and ${\displaystyle \delta \equiv \min\{\kappa _{1}|b-a|^{\kappa _{2}},|x_{1/2}-x_{f}|\}}$ ;
3. [Projection Step] Project the estimator to minmax interval: ${\displaystyle x_{\text{ITP}}\equiv x_{1/2}-\sigma \rho _{k}}$ where ${\displaystyle \rho _{k}\equiv \min \left\{\epsilon 2^{n_{1/2}+n_{0}-j}-{\frac {b-a}{2}},|x_{t}-x_{1/2}|\right\}}$.

The value of the function ${\displaystyle f(x_{\text{ITP}})}$ on this point is queried, and the interval is then reduced to bracket the root by keeping the sub-interval with function values of opposite sign on each end.

Input: ${\displaystyle a,b,\epsilon ,\kappa _{1},\kappa _{2},n_{0},f}$ 
    Preprocessing: ${\displaystyle n_{1/2}=\lceil \log _{2}{\tfrac {b-a}{2\epsilon }}\rceil }$, ${\displaystyle n_{\max }=n_{1/2}+n_{0}}$, and  ${\displaystyle j=0}$;
    While ( ${\displaystyle b-a>2\epsilon }$ )
  
        Calculating Parameters:
            ${\displaystyle x_{1/2}={\tfrac {a+b}{2}}}$, ${\displaystyle r=\epsilon 2^{n_{\max }-j}-(b-a)/2}$, ${\displaystyle \delta =\kappa _{1}(b-a)^{\kappa _{2}}}$;
        Interpolation:
            ${\displaystyle x_{f}={\tfrac {y_{b}a-y_{a}b}{y_{b}-y_{a}}}}$;
        Truncation:
            ${\displaystyle \sigma ={\text{sign}}(x_{1/2}-x_{f})}$;
            If ${\displaystyle \delta \leq |x_{1/2}-x_{f}|}$ then ${\displaystyle x_{t}=x_{f}+\sigma \delta }$,
            Else ${\displaystyle x_{t}=x_{1/2}}$;
        Projection:
            If ${\displaystyle |x_{t}-x_{1/2}|\leq r}$ then ${\displaystyle x_{\text{ITP}}=x_{t}}$,
            Else ${\displaystyle x_{\text{ITP}}=x_{1/2}-\sigma r}$;
        Updating Interval:
            ${\displaystyle y_{\text{ITP}}=f(x_{\text{ITP}})}$;
            If ${\displaystyle y_{\text{ITP}}>0}$ then ${\displaystyle b=x_{ITP}}$ and ${\displaystyle y_{b}=y_{\text{ITP}}}$,
            Elseif ${\displaystyle y_{\text{ITP}}<0}$ then ${\displaystyle a=x_{\text{ITP}}}$ and ${\displaystyle y_{a}=y_{\text{ITP}}}$,
            Else ${\displaystyle a=x_{\text{ITP}}}$ and ${\displaystyle b=x_{\text{ITP}}}$;
            ${\displaystyle j=j+1}$;
Output: ${\displaystyle {\hat {x}}={\tfrac {a+b}{2}}}$

Example: Finding the root of a polynomial

Suppose that the ITP method is used to find a root of the polynomial ${\displaystyle f(x)=x^{3}-x-2\,.}$ Using ${\displaystyle \epsilon =0.0005,\kappa _{1}=0.1,\kappa _{2}=2}$ and ${\displaystyle n_{0}=1}$ we find that:

Iteration	${\displaystyle a_{n}}$	${\displaystyle b_{n}}$	${\displaystyle c_{n}}$	${\displaystyle f(c_{n})}$
1	1	2	1.43333333333333	-0.488629629629630
2	1.43333333333333	2	1.52713145056966	0.0343383329048983
3	1.43333333333333	1.52713145056966	1.52009281150978	-0.00764147709265051
4	1.52009281150978	1.52713145056966	1.52137899116052	-4.25363464540141e-06
5	1.52137899116052	1.52713145056966	1.52138301273268	1.96497878177659e-05
6	1.52137899116052	1.52138301273268	← Stopping Criteria Satisfied

This example can be compared to Bisection method § Example: Finding the root of a polynomial. The ITP method required less than half the number of iterations than the bisection to obtain a more precise estimate of the root with no cost on the minmax guarantees. Other methods might also attain a similar speed of convergence (such as Ridders, Brent etc.) but without the minmax guarantees given by the ITP method.

Analysis

The main advantage of the ITP method is that it is guaranteed to require no more iterations than the bisection method when ${\displaystyle n_{0}=0}$. And so its average performance is guaranteed to be better than the bisection method even when interpolation fails. Furthermore, if interpolations do not fail (smooth functions), then it is guaranteed to enjoy the high order of convergence as interpolation based methods.

See also

• Bisection method
• Ridders' method
• Regula falsi
• Brent's method

Notes

References

External links

• An Improved Bisection Method, by Kudos