Hopf fibration

The Hopf fibration can be visualized using a stereographic projection of

S 3

to

R 3

and then compressing

R 3

to a ball. This image shows points on

S 2

and their corresponding fibers with the same color.

Pairwise linked keyrings mimic part of the Hopf fibration.

In the mathematical field of differential topology, the Hopf fibration (also known as the Hopf bundle or Hopf map) describes a 3-sphere (a hypersphere in four-dimensional space) in terms of circles and an ordinary sphere. Discovered by Heinz Hopf in 1931, it is an influential early example of a fiber bundle. Technically, Hopf found a many-to-one continuous function (or "map") from the $3$ -sphere onto the $2$ -sphere such that each distinct point of the $2$ -sphere is mapped from a distinct great circle of the $3$ -sphere (Hopf 1931).^[1] Thus the $3$ -sphere is composed of fibers, where each fiber is a circle — one for each point of the $2$ -sphere.

This fiber bundle structure is denoted

S^{1}\hookrightarrow S^{3}{\xrightarrow {\ p\,}}S^{2},

meaning that the fiber space $S 1$ (a circle) is embedded in the total space $S 3$ (the $3$ -sphere), and $p : S 3 \to S 2$ (Hopf's map) projects $S 3$ onto the base space $S 2$ (the ordinary $2$ -sphere). The Hopf fibration, like any fiber bundle, has the important property that it is locally a product space. However it is not a trivial fiber bundle, i.e., $S 3$ is not globally a product of $S 2$ and $S 1$ although locally it is indistinguishable from it.

This has many implications: for example the existence of this bundle shows that the higher homotopy groups of spheres are not trivial in general. It also provides a basic example of a principal bundle, by identifying the fiber with the circle group.

Stereographic projection of the Hopf fibration induces a remarkable structure on $R 3$ , in which all of 3-dimensional space, except for the z-axis, is filled with nested tori made of linking Villarceau circles. Here each fiber projects to a circle in space (one of which is a line, thought of as a "circle through infinity"). Each torus is the stereographic projection of the inverse image of a circle of latitude of the $2$ -sphere. (Topologically, a torus is the product of two circles.) These tori are illustrated in the images at right. When $R 3$ is compressed to the boundary of a ball, some geometric structure is lost although the topological structure is retained (see Topology and geometry). The loops are homeomorphic to circles, although they are not geometric circles.

There are numerous generalizations of the Hopf fibration. The unit sphere in complex coordinate space $C n +1$ fibers naturally over the complex projective space $CP n$ with circles as fibers, and there are also real, quaternionic,^[2] and octonionic versions of these fibrations. In particular, the Hopf fibration belongs to a family of four fiber bundles in which the total space, base space, and fiber space are all spheres:

S^{0}\hookrightarrow S^{1}\to S^{1},

S^{1}\hookrightarrow S^{3}\to S^{2},

S^{3}\hookrightarrow S^{7}\to S^{4},

S^{7}\hookrightarrow S^{15}\to S^{8}.

By Adams's theorem such fibrations can occur only in these dimensions.

The Hopf fibration is important in twistor theory.

Definition and construction

For any natural number n, an n-dimensional sphere, or n-sphere, can be defined as the set of points in an $(n+1)$ -dimensional space which are a fixed distance from a central point. For concreteness, the central point can be taken to be the origin, and the distance of the points on the sphere from this origin can be assumed to be a unit length. With this convention, the n-sphere, $S^{n}$ , consists of the points $(x_{1},x_{2},\ldots ,x_{n+1})$ in $\mathbb {R} ^{n+1}$ with x₁² + x₂² + ⋯+ x_{n + 1}² = 1. For example, the $3$ -sphere consists of the points (x₁, x₂, x₃, x₄) in R⁴ with x₁² + x₂² + x₃² + x₄² = 1.

The Hopf fibration $p : S 3 \to S 2$ of the $3$ -sphere over the $2$ -sphere can be defined in several ways.

Direct construction

Identify $R 4$ with $C 2$ and $R 3$ with $C \times R$ (where $C$ denotes the complex numbers) by writing:

(x_{1},x_{2},x_{3},x_{4})\leftrightarrow (z_{0},z_{1})=(x_{1}+ix_{2},x_{3}+ix_{4})

and

(x_{1},x_{2},x_{3})\leftrightarrow (z,x)=(x_{1}+ix_{2},x_{3})

.

Thus $S 3$ is identified with the subset of all $(z 0, z 1)$ in $C 2$ such that $| z 0 | 2 + | z 1 | 2 = 1$ , and $S 2$ is identified with the subset of all $(z, x)$ in $C \times R$ such that $| z | 2 + x 2 = 1$ . (Here, for a complex number $z = x + i y, | z | 2 = z z * = x 2 + y 2$ , where the star denotes the complex conjugate.) Then the Hopf fibration $p$ is defined by

p(z_{0},z_{1})=(2z_{0}z_{1}^{\ast },\left|z_{0}\right|^{2}-\left|z_{1}\right|^{2}).

The first component is a complex number, whereas the second component is real. Any point on the $3$ -sphere must have the property that $| z 0 | 2 + | z 1 | 2 = 1$ . If that is so, then $p (z 0, z 1)$ lies on the unit $2$ -sphere in $C \times R$ , as may be shown by adding the squares of the absolute values of the complex and real components of $p$

2z_{0}z_{1}^{\ast }\cdot 2z_{0}^{\ast }z_{1}+\left(\left|z_{0}\right|^{2}-\left|z_{1}\right|^{2}\right)^{2}=4\left|z_{0}\right|^{2}\left|z_{1}\right|^{2}+\left|z_{0}\right|^{4}-2\left|z_{0}\right|^{2}\left|z_{1}\right|^{2}+\left|z_{1}\right|^{4}=\left(\left|z_{0}\right|^{2}+\left|z_{1}\right|^{2}\right)^{2}=1

Furthermore, if two points on the 3-sphere map to the same point on the 2-sphere, i.e., if $p (z 0, z 1) = p (w 0, w 1)$ , then $(w 0, w 1)$ must equal $(λ z 0, λ z 1)$ for some complex number $λ$ with $| λ | 2 = 1$ . The converse is also true; any two points on the $3$ -sphere that differ by a common complex factor $λ$ map to the same point on the $2$ -sphere. These conclusions follow, because the complex factor $λ$ cancels with its complex conjugate $λ *$ in both parts of $p$ : in the complex $2 z 0 z 1 *$ component and in the real component $| z 0 | 2 - | z 1 | 2$ .

Since the set of complex numbers $λ$ with $| λ | 2 = 1$ form the unit circle in the complex plane, it follows that for each point $m$ in $S 2$ , the inverse image $p -1 (m)$ is a circle, i.e., $p -1 m ≅ S 1$ . Thus the $3$ -sphere is realized as a disjoint union of these circular fibers.

A direct parametrization of the $3$ -sphere employing the Hopf map is as follows.^[3]

z_{0}=e^{i\,{\frac {\xi _{1}+\xi _{2}}{2}}}\sin \eta

z_{1}=e^{i\,{\frac {\xi _{2}-\xi _{1}}{2}}}\cos \eta .

or in Euclidean $R 4$

x_{1}=\cos \left({\frac {\xi _{1}+\xi _{2}}{2}}\right)\sin \eta

x_{2}=\sin \left({\frac {\xi _{1}+\xi _{2}}{2}}\right)\sin \eta

x_{3}=\cos \left({\frac {\xi _{2}-\xi _{1}}{2}}\right)\cos \eta

x_{4}=\sin \left({\frac {\xi _{2}-\xi _{1}}{2}}\right)\cos \eta

Where $η$ runs over the range from $0$ to $π /2$ , $ξ 1$ runs over the range from $0$ to $2 π$ , and $ξ 2$ can take any value from $0$ to $4 π$ . Every value of $η$ , except $0$ and $π /2$ which specify circles, specifies a separate flat torus in the $3$ -sphere, and one round trip ( $0$ to $4 π$ ) of either $ξ 1$ or $ξ 2$ causes you to make one full circle of both limbs of the torus.

A mapping of the above parametrization to the $2$ -sphere is as follows, with points on the circles parametrized by $ξ 2$ .

z=\cos(2\eta )

x=\sin(2\eta )\cos \xi _{1}

y=\sin(2\eta )\sin \xi _{1}

Geometric interpretation using the complex projective line

A geometric interpretation of the fibration may be obtained using the complex projective line, $CP 1$ , which is defined to be the set of all complex one-dimensional subspaces of $C 2$ . Equivalently, $CP 1$ is the quotient of $C2\{0}$ by the equivalence relation which identifies $(z 0, z 1)$ with $(λ z 0, λ z 1)$ for any nonzero complex number λ. On any complex line in C² there is a circle of unit norm, and so the restriction of the quotient map to the points of unit norm is a fibration of $S 3$ over $CP 1$ .

$CP 1$ is diffeomorphic to a $2$ -sphere: indeed it can be identified with the Riemann sphere $C \infty = C \cup {\infty}$ , which is the one point compactification of $C$ (obtained by adding a point at infinity). The formula given for $p$ above defines an explicit diffeomorphism between the complex projective line and the ordinary $2$ -sphere in $3$ -dimensional space. Alternatively, the point $(z 0, z 1)$ can be mapped to the ratio $z 1 / z 0$ in the Riemann sphere $C \infty$ .

Fiber bundle structure

The Hopf fibration defines a fiber bundle, with bundle projection $p$ . This means that it has a "local product structure", in the sense that every point of the $2$ -sphere has some neighborhood $U$ whose inverse image in the $3$ -sphere can be identified with the product of $U$ and a circle: $p -1 (U) ≅ U \times S 1$ . Such a fibration is said to be locally trivial.

For the Hopf fibration, it is enough to remove a single point $m$ from $S 2$ and the corresponding circle $p -1 (m)$ from $S 3$ ; thus one can take $U = S2\{m}$ , and any point in $S 2$ has a neighborhood of this form.

Geometric interpretation using rotations

Another geometric interpretation of the Hopf fibration can be obtained by considering rotations of the $2$ -sphere in ordinary $3$ -dimensional space. The rotation group SO(3) has a double cover, the spin group $Spin(3)$ , diffeomorphic to the $3$ -sphere. The spin group acts transitively on $S 2$ by rotations. The stabilizer of a point is isomorphic to the circle group; its elements are angles of rotation leaving the given point unmoved, all sharing the axis connecting that point to the sphere's center. It follows easily that the $3$ -sphere is a principal circle bundle over the $2$ -sphere, and this is the Hopf fibration.

To make this more explicit, there are two approaches: the group $Spin(3)$ can either be identified with the group Sp(1) of unit quaternions, or with the special unitary group SU(2).

In the first approach, a vector $(x 1, x 2, x 3, x 4)$ in $R 4$ is interpreted as a quaternion $q \in H$ by writing

q=x_{1}+\mathbf {i} x_{2}+\mathbf {j} x_{3}+\mathbf {k} x_{4}.\,\!

The $3$ -sphere is then identified with the versors, the quaternions of unit norm, those $q \in H$ for which $| q | 2 = 1$ , where $| q | 2 = q q *$ , which is equal to $x 12 + x 22 + x 32 + x 42$ for $q$ as above.

On the other hand, a vector $(y 1, y 2, y 3)$ in $R 3$ can be interpreted as a pure quaternion

p=\mathbf {i} y_{1}+\mathbf {j} y_{2}+\mathbf {k} y_{3}.\,\!

Then, as is well-known since Cayley (1845), the mapping

p\mapsto qpq^{*}\,\!

is a rotation in $R 3$ : indeed it is clearly an isometry, since $| q p q * | 2 = q p q * q p * q * = q p p * q * = | p | 2$ , and it is not hard to check that it preserves orientation.

In fact, this identifies the group of versors with the group of rotations of $R 3$ , modulo the fact that the versors $q$ and $- q$ determine the same rotation. As noted above, the rotations act transitively on $S 2$ , and the set of versors $q$ which fix a given right versor $p$ have the form $q = u + v p$ , where $u$ and $v$ are real numbers with $u 2 + v 2 = 1$ . This is a circle subgroup. For concreteness, one can take $p = k$ , and then the Hopf fibration can be defined as the map sending a versor $ω to ω k ω *$ . All the quaternions $ωq$ , where $q$ is one of the circle of versors that fix $k$ , get mapped to the same thing (which happens to be one of the two $180°$ rotations rotating $k$ to the same place as $ω$ does).

Another way to look at this fibration is that every versor ω moves the plane spanned by ${1, k}$ to a new plane spanned by ${ω, ωk}$ . Any quaternion $ωq$ , where $q$ is one of the circle of versors that fix $k$ , will have the same effect. We put all these into one fibre, and the fibres can be mapped one-to-one to the $2$ -sphere of $180°$ rotations which is the range of $ωkω *$ .

This approach is related to the direct construction by identifying a quaternion $q = x 1 + i x 2 + j x 3 + k x 4$ with the $2\times2$ matrix:

{\begin{bmatrix}x_{1}+\mathbf {i} x_{2}&x_{3}+\mathbf {i} x_{4}\\-x_{3}+\mathbf {i} x_{4}&x_{1}-\mathbf {i} x_{2}\end{bmatrix}}.\,\!

This identifies the group of versors with $SU(2)$ , and the imaginary quaternions with the skew-hermitian $2\times2$ matrices (isomorphic to $C \times R$ ).

Explicit formulae

The rotation induced by a unit quaternion $q = w + i x + j y + k z$ is given explicitly by the orthogonal matrix

{\begin{bmatrix}1-2(y^{2}+z^{2})&2(xy-wz)&2(xz+wy)\\2(xy+wz)&1-2(x^{2}+z^{2})&2(yz-wx)\\2(xz-wy)&2(yz+wx)&1-2(x^{2}+y^{2})\end{bmatrix}}.

Here we find an explicit real formula for the bundle projection by noting that the fixed unit vector along the $z$ axis, $(0,0,1)$ , rotates to another unit vector,

{\Big (}2(xz+wy),2(yz-wx),1-2(x^{2}+y^{2}){\Big )},\,\!

which is a continuous function of $(w, x, y, z)$ . That is, the image of $q$ is the point on the $2$ -sphere where it sends the unit vector along the $z$ axis. The fiber for a given point on $S 2$ consists of all those unit quaternions that send the unit vector there.

We can also write an explicit formula for the fiber over a point $(a, b, c)$ in $S 2$ . Multiplication of unit quaternions produces composition of rotations, and

q_{\theta }=\cos \theta +\mathbf {k} \sin \theta

is a rotation by $2 θ$ around the $z$ axis. As $θ$ varies, this sweeps out a great circle of $S 3$ , our prototypical fiber. So long as the base point, $(a, b, c)$ , is not the antipode, $(0, 0, -1)$ , the quaternion

q_{(a,b,c)}={\frac {1}{\sqrt {2(1+c)}}}(1+c-\mathbf {i} b+\mathbf {j} a)

will send $(0, 0, 1)$ to $(a, b, c)$ . Thus the fiber of $(a, b, c)$ is given by quaternions of the form $q (a, b, c) q θ$ , which are the $S 3$ points

{\frac {1}{\sqrt {2(1+c)}}}{\Big (}(1+c)\cos(\theta ),a\sin(\theta )-b\cos(\theta ),a\cos(\theta )+b\sin(\theta ),(1+c)\sin(\theta ){\Big )}.\,\!

Since multiplication by $q (a, b, c)$ acts as a rotation of quaternion space, the fiber is not merely a topological circle, it is a geometric circle.

The final fiber, for $(0, 0, -1)$ , can be given by defining $q (0,0,-1)$ to equal $i$ , producing

{\Big (}0,\cos(\theta ),-\sin(\theta ),0{\Big )},

which completes the bundle. But note that this one-to-one mapping between $S 3$ and $S 2 \times S 1$ is not continuous on this circle, reflecting the fact that $S 3$ is not topologically equivalent to $S 2 \times S 1$ .

Thus, a simple way of visualizing the Hopf fibration is as follows. Any point on the $3$ -sphere is equivalent to a quaternion, which in turn is equivalent to a particular rotation of a Cartesian coordinate frame in three dimensions. The set of all possible quaternions produces the set of all possible rotations, which moves the tip of one unit vector of such a coordinate frame (say, the $z$ vector) to all possible points on a unit $2$ -sphere. However, fixing the tip of the $z$ vector does not specify the rotation fully; a further rotation is possible about the $z -$ axis. Thus, the $3$ -sphere is mapped onto the $2$ -sphere, plus a single rotation.

The rotation can be represented using the Euler angles θ, φ, and ψ. The Hopf mapping maps the rotation to the point on the 2-sphere given by θ and φ, and the associated circle is parametrized by ψ. Note that when θ = π the Euler angles φ and ψ are not well defined individually, so we do not have a one-to-one mapping (or a one-to-two mapping) between the 3-torus of (θ, φ, ψ) and S³.

Fluid mechanics

If the Hopf fibration is treated as a vector field in 3 dimensional space then there is a solution to the (compressible, non-viscous) Navier–Stokes equations of fluid dynamics in which the fluid flows along the circles of the projection of the Hopf fibration in 3 dimensional space. The size of the velocities, the density and the pressure can be chosen at each point to satisfy the equations. All these quantities fall to zero going away from the centre. If a is the distance to the inner ring, the velocities, pressure and density fields are given by:

\mathbf {v} (x,y,z)=A\left(a^{2}+x^{2}+y^{2}+z^{2}\right)^{-2}\left(2(-ay+xz),2(ax+yz),a^{2}-x^{2}-y^{2}+z^{2}\right)

p(x,y,z)=-A^{2}B\left(a^{2}+x^{2}+y^{2}+z^{2}\right)^{-3},

\rho (x,y,z)=3B\left(a^{2}+x^{2}+y^{2}+z^{2}\right)^{-1}

for arbitrary constants $A$ and $B$ . Similar patterns of fields are found as soliton solutions of magnetohydrodynamics:^[4]

Generalizations

The Hopf construction, viewed as a fiber bundle p: S³ → CP¹, admits several generalizations, which are also often known as Hopf fibrations. First, one can replace the projective line by an n-dimensional projective space. Second, one can replace the complex numbers by any (real) division algebra, including (for n = 1) the octonions.

Real Hopf fibrations

A real version of the Hopf fibration is obtained by regarding the circle S¹ as a subset of R² in the usual way and by identifying antipodal points. This gives a fiber bundle S¹ → RP¹ over the real projective line with fiber S⁰ = {1, −1}. Just as CP¹ is diffeomorphic to a sphere, RP¹ is diffeomorphic to a circle.

More generally, the n-sphere Sⁿ fibers over real projective space RPⁿ with fiber S⁰.

Complex Hopf fibrations

The Hopf construction gives circle bundles p : S²ⁿ⁺¹ → CPⁿ over complex projective space. This is actually the restriction of the tautological line bundle over CPⁿ to the unit sphere in Cⁿ⁺¹.

Quaternionic Hopf fibrations

Similarly, one can regard S⁴ⁿ⁺³ as lying in Hⁿ⁺¹ (quaternionic n-space) and factor out by unit quaternion (= S³) multiplication to get the quaternionic projective space HPⁿ. In particular, since S⁴ = HP¹, there is a bundle S⁷ → S⁴ with fiber S³.

Octonionic Hopf fibrations

A similar construction with the octonions yields a bundle S¹⁵ → S⁸ with fiber S⁷. But the sphere S³¹ does not fiber over S¹⁶ with fiber S¹⁵. One can regard S⁸ as the octonionic projective line OP¹. Although one can also define an octonionic projective plane OP², the sphere S²³ does not fiber over OP² with fiber S⁷.^[5]^[6]

Fibrations between spheres

Sometimes the term "Hopf fibration" is restricted to the fibrations between spheres obtained above, which are

S¹ → S¹ with fiber S⁰
S³ → S² with fiber S¹
S⁷ → S⁴ with fiber S³
S¹⁵ → S⁸ with fiber S⁷

As a consequence of Adams's theorem, fiber bundles with spheres as total space, base space, and fiber can occur only in these dimensions. Fiber bundles with similar properties, but different from the Hopf fibrations, were used by John Milnor to construct exotic spheres.

Geometry and applications

The fibers of the Hopf fibration stereographically project to a family of Villarceau circles in R³.

The Hopf fibration has many implications, some purely attractive, others deeper. For example, stereographic projection S³ → R³ induces a remarkable structure in R³, which in turn illuminates the topology of the bundle (Lyons 2003). Stereographic projection preserves circles and maps the Hopf fibers to geometrically perfect circles in R³ which fill space. Here there is one exception: the Hopf circle containing the projection point maps to a straight line in R³ — a "circle through infinity".

The fibers over a circle of latitude on S² form a torus in S³ (topologically, a torus is the product of two circles) and these project to nested toruses in R³ which also fill space. The individual fibers map to linking Villarceau circles on these tori, with the exception of the circle through the projection point and the one through its opposite point: the former maps to a straight line, the latter to a unit circle perpendicular to, and centered on, this line, which may be viewed as a degenerate torus whose minor radius has shrunken to zero. Every other fiber image encircles the line as well, and so, by symmetry, each circle is linked through every circle, both in R³ and in S³. Two such linking circles form a Hopf link in R³

Hopf proved that the Hopf map has Hopf invariant 1, and therefore is not null-homotopic. In fact it generates the homotopy group π₃(S²) and has infinite order.

In quantum mechanics, the Riemann sphere is known as the Bloch sphere, and the Hopf fibration describes the topological structure of a quantum mechanical two-level system or qubit. Similarly, the topology of a pair of entangled two-level systems is given by the Hopf fibration

S^{3}\hookrightarrow S^{7}\to S^{4}.

(Mosseri & Dandoloff 2001). Moreover, the Hopf fibration is equivalent to the fiber bundle structure of the Dirac monopole.^[7]

Hopf fibration also found applications in robotics, where it was used to generate uniform samples on SO(3) for the probabilistic roadmap algorithm in motion planning.^[8] It also found application in the automatic control of quadrotors.^[9]^[10]

Notes

↑ This partition of the $3$ -sphere into disjoint great circles is possible because, unlike with the $2$ -sphere, distinct great circles of the $3$ -sphere need not intersect.
↑ quaternionic Hopf Fibration, ncatlab.org. https://ncatlab.org/nlab/show/quaternionic+Hopf+fibration
↑ Smith, Benjamin. "Benjamin H. Smith's Hopf fibration notes" (PDF). Archived from the original (PDF) on September 14, 2016.
↑ Kamchatnov, A. M. (1982), Topological solitons in magnetohydrodynamics (PDF)
↑ Besse, Arthur (1978). Manifolds all of whose Geodesics are Closed. Springer-Verlag. ISBN 978-3-540-08158-6. (§0.26 on page 6)
↑ sci.math.research 1993 thread "Spheres fibred by spheres"
↑ Friedman, John L. (June 2015). "Historical note on fiber bundles". Physics Today. 68 (6): 11. Bibcode:2015PhT....68f..11F. doi:10.1063/PT.3.2799.
↑ Yershova, Anna; Jain, Swati; LaValle, Steven M.; Mitchell, Julie C. (2010). "Generating Uniform Incremental Grids on SO (3) Using the Hopf Fibration". The International Journal of Robotics Research. 29 (7): 801–812. doi:10.1177/0278364909352700. ISSN 0278-3649. PMC 2896220. PMID 20607113.
↑ Watterson, Michael; Kumar, Vijay (2020). Amato, Nancy M.; Hager, Greg; Thomas, Shawna; Torres-Torriti, Miguel (eds.). "Control of Quadrotors Using the Hopf Fibration on SO(3)". Robotics Research. Springer Proceedings in Advanced Robotics. Cham: Springer International Publishing. 10: 199–215. doi:10.1007/978-3-030-28619-4_20. ISBN 978-3-030-28619-4. S2CID 195852176.
↑ Jia, Jindou; Guo, Kexin; Yu, Xiang; Zhao, Weihua; Guo, Lei (2022). "Accurate High-Maneuvering Trajectory Tracking for Quadrotors: A Drag Utilization Method". IEEE Robotics and Automation Letters. 7 (3): 6966–6973. doi:10.1109/LRA.2022.3176449. ISSN 2377-3766. S2CID 249550496.

References

Cayley, Arthur (1845), "On certain results relating to quaternions" (PDF), Philosophical Magazine, 26 (171): 141–145, doi:10.1080/14786444508562684; reprinted as article 20 in Cayley, Arthur (1889), The collected mathematical papers of Arthur Cayley, vol. (1841–1853), Cambridge University Press, pp. 123–126
Hopf, Heinz (1931), "Über die Abbildungen der dreidimensionalen Sphäre auf die Kugelfläche", Mathematische Annalen, Berlin: Springer, 104 (1): 637–665, doi:10.1007/BF01457962, ISSN 0025-5831, S2CID 123533891
Hopf, Heinz (1935), "Über die Abbildungen von Sphären auf Sphären niedrigerer Dimension", Fundamenta Mathematicae, Warsaw: Polish Acad. Sci., 25: 427–440, doi:10.4064/fm-25-1-427-440, ISSN 0016-2736
Lyons, David W. (April 2003), "An Elementary Introduction to the Hopf Fibration" (PDF), Mathematics Magazine, 76 (2): 87–98, arXiv:2212.01642, doi:10.2307/3219300, ISSN 0025-570X, JSTOR 3219300
Mosseri, R.; Dandoloff, R. (2001), "Geometry of entangled states, Bloch spheres and Hopf fibrations", Journal of Physics A: Mathematical and Theoretical, 34 (47): 10243–10252, arXiv:quant-ph/0108137, Bibcode:2001JPhA...3410243M, doi:10.1088/0305-4470/34/47/324, S2CID 119462869.
Steenrod, Norman (1951), The Topology of Fibre Bundles, PMS 14, Princeton University Press (published 1999), ISBN 978-0-691-00548-5
Urbantke, H.K. (2003), "The Hopf fibration-seven times in physics", Journal of Geometry and Physics, 46 (2): 125–150, Bibcode:2003JGP....46..125U, doi:10.1016/S0393-0440(02)00121-3
Zamboj, Michal (8 Jan 2021). "Synthetic construction of the Hopf fibration in a double orthogonal projection of 4-space". Journal of Computational Design and Engineering. 8 (3): 836–854. arXiv:2003.09236v2. doi:10.1093/jcde/qwab018.
Banchoff, Thomas (1988). "Geometry of the Hopf Mapping and Pinkall's Tori of Given Conformal Type". In Tangora, Martin (ed.). Computers in Algebra. New York and Basel: Marcel Dekker. pp. 57–62.

External links

"Hopf fibration", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
Rowland, Todd. "Hopf fibration". MathWorld.
Dimensions Math Chapters 7 and 8 illustrate the Hopf fibration with animated computer graphics.
An Elementary Introduction to the Hopf Fibration by David W. Lyons (PDF)
YouTube animation showing dynamic mapping of points on the 2-sphere to circles in the 3-sphere, by Professor Niles Johnson.
YouTube animation of the construction of the 120-cell By Gian Marco Todesco shows the Hopf fibration of the 120-cell.
Video of one 30-cell ring of the 600-cell from http://page.math.tu-berlin.de/~gunn/.
Interactive visualization of the mapping of points on the 2-sphere to circles in the 3-sphere

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] This partition of the $3$ -sphere into disjoint great circles is possible because, unlike with the $2$ -sphere, distinct great circles of the $3$ -sphere need not intersect.

[quaternionic_Hopf_Fibration_on_nLab-2] quaternionic Hopf Fibration, ncatlab.org. https://ncatlab.org/nlab/show/quaternionic+Hopf+fibration

[3] Smith, Benjamin. "Benjamin H. Smith's Hopf fibration notes" (PDF). Archived from the original (PDF) on September 14, 2016.

[4] Kamchatnov, A. M. (1982), Topological solitons in magnetohydrodynamics (PDF)

[5] Besse, Arthur (1978). Manifolds all of whose Geodesics are Closed. Springer-Verlag. ISBN 978-3-540-08158-6. (§0.26 on page 6)

[6] sci.math.research 1993 thread "Spheres fibred by spheres"

[7] Friedman, John L. (June 2015). "Historical note on fiber bundles". Physics Today. 68 (6): 11. Bibcode:2015PhT....68f..11F. doi:10.1063/PT.3.2799.

[8] Yershova, Anna; Jain, Swati; LaValle, Steven M.; Mitchell, Julie C. (2010). "Generating Uniform Incremental Grids on SO (3) Using the Hopf Fibration". The International Journal of Robotics Research. 29 (7): 801–812. doi:10.1177/0278364909352700. ISSN 0278-3649. PMC 2896220. PMID 20607113.

[9] Watterson, Michael; Kumar, Vijay (2020). Amato, Nancy M.; Hager, Greg; Thomas, Shawna; Torres-Torriti, Miguel (eds.). "Control of Quadrotors Using the Hopf Fibration on SO(3)". Robotics Research. Springer Proceedings in Advanced Robotics. Cham: Springer International Publishing. 10: 199–215. doi:10.1007/978-3-030-28619-4_20. ISBN 978-3-030-28619-4. S2CID 195852176.

[10] Jia, Jindou; Guo, Kexin; Yu, Xiang; Zhao, Weihua; Guo, Lei (2022). "Accurate High-Maneuvering Trajectory Tracking for Quadrotors: A Drag Utilization Method". IEEE Robotics and Automation Letters. 7 (3): 6966–6973. doi:10.1109/LRA.2022.3176449. ISSN 2377-3766. S2CID 249550496.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]