A fluyt (archaic Dutch: fluijt "flute"; Dutch pronunciation: [flœyt] ) ⓘ[1] is a Dutch type of sailing vessel originally designed by the shipwrights of Hoorn as a dedicated cargo vessel.[2] Originating in the Dutch Republic in the 16th century, the vessel was designed to facilitate transoceanic delivery with the maximum of space and crew efficiency. Unlike rivals, it was not built for conversion in wartime to a warship, so it was cheaper to build and carried twice the cargo, and could be handled by a smaller crew. Construction by specialized shipyards using new tools made it half the cost of rival ships. These factors combined to sharply lower the cost of transportation for Dutch merchants, giving them a major competitive advantage.[3][4]: 20 The fluyt was a significant factor in the 17th-century rise of the Dutch seaborne empire.[4]: 68 In 1670 the Dutch merchant marine totalled 568,000 tons of shipping—about half the European total.[5]
Ship design
The standard fluyt design minimized or completely eliminated its armaments to maximize available cargo space, and used block and tackle extensively to facilitate ship operations. Another advantage of its pear-shape (when viewed from the fore or aft) was a shallow draft which allowed the vessel to bring cargo in and out of ports and down rivers that other vessels could not reach. This ship class was credited in enhancing Dutch competitiveness in international trade, and was widely employed by the Dutch East India Company in the 17th and 18th centuries.[4] However, its usefulness caused the fluyt to gain such popularity that similar designs were soon developed by seagoing competitors of the Dutch. For example, the English shipbuilding industry began to adapt the design of the fluyt during the later part of the 17th century as English merchants, seeing how much cheaper Dutch shipping was, acquired Dutch-built ships that were captured in the Anglo-Dutch wars.[6]
The design of fluyts was largely similar to that of the early galleons (a ship invented in Spain, and received by the Dutch as a part of the same Kingdom). These ships typically weighed 200–300 tons and were approximately 80 feet (24 metres) in length.
It is a persistent myth that the fluyt was developed and functioned to evade Sound Tolls. The toll registers, however, show that during the 70 years from 1562 to 1632 it was a well-established procedure in the Sound for the toll-officers to use the bills of lading to determine the loading-capacities of the vessels passing through. They did not employ any sort of measuring device to assess the width, length, and depth of the vessels and then calculate the size of the ships.[7]
The fluyt was square rigged with two or three masts. When rigged with three masts, the fore and main (front two) masts were square rigged, with the mizzen (rearmost) mast often rigged with a triangular lateen sail, as pictured above. Masts were much higher than those of galleons to allow for greater speed. At times fluyts were also armed and served as auxiliary vessels, which was a common practice in the Baltic Sea.
The Swan
In 2003, Martin Mattenik and Deep Sea Productions, using side scanning sonar, discovered a shipwreck lying on the floor of the Baltic Sea. The wreck was visited five times between 2003 and 2010. The Baltic is unusual in that there is a thick layer of fresh water inhospitable to saltwater-loving shipworms and shipwrecks are protected from the ravages of shipworms. The top of the wreck's rudder is decorated with three flowers which is typical of Dutch-built ships of the era. This ship is believed to be named the Swan due to the sculpted body of a swan found in the wreckage. At the time it was customary to attach a figure depicting the name of the ship to the transom. Dutch fluyts were built and used in the 16th and 17th centuries as a contract-for-hire vessel. England had not yet established its own large-scale shipbuilding industry and the Dutch dominated the market.[8] During the 17th century, English companies leased ships like the Swan to carry colonists to America.
Replicas
The Hector, constructed in Pictou, Nova Scotia, and launched in 2000, is a replica of an early 18th-century fluyt which, in the summer of 1773 carried 189 Scottish immigrants to Nova Scotia. The replica was constructed according to line drawings from the Maritime Museum Rotterdam, and built using traditional shipbuilding techniques. As of 2017, the Hector is operated by the Hector Quay Society and is open to the public.[9]
The Mayflower II is a replica of the original Mayflower, which transported the Pilgrims to Plymouth in modern-day Massachusetts - and is a fluyt design.
See also
References
- ↑ van Brederode, Willem; Doedens, A. (2008). Doedens, A.; Looijesteijn, Henk (eds.). Op jacht naar Spaans zilver: het scheepsjournaal van Willem van Brederode, kapitein der mariniers in de Nassause vloot (1623–1626) [On the hunt for Spanish silver: The logbook of Willem van Brederode, Captain of the Marines in the Nassau Fleet (1623–1626)]. Hilversum: Verloren. ISBN 9789087040475.
- ↑ Wheatley, Joe. "Fluyts and Katts". The Captain Cook Society. Retrieved 11 May 2017.
- ↑ de Vries, Jan (1976). The Economy of Europe in an Age of Crisis, 1600–1750. Cambridge University Press. pp. 117–18.
- 1 2 3 Boxer, CR (1965). The Dutch Seaborne Empire 1600–1800. Alfred A. Knopf.
- ↑ Blanning, Tim (2007). The Pursuit of Glory: Europe, 1648–1815. Penguin. p. 96.
- ↑ Davis, Ralph (1962). The Rise of the English Shipping Industry in the 17th and 18th Centuries. Newton Abbot: David & Charles. pp. 47–54. ISBN 0-7153-5462-0.
- ↑ Mogens, Jensen (2018). "Was the flute a vessel designed to evade paying toll in the Sound?" (PDF). Tijdschrift voor Zeegeschiedenis [Marine History Magazine]. 37 (2). Retrieved 1 April 2022.
- ↑ Unger, Richard W. (April 1981). "Dutch Shipbuilding in the Golden Age". History Today. Vol. 34, No. 1.
- ↑ "Hector Heritage Quay – The Symbol of Scottish Immigration in North America". shiphector.com. Retrieved 2017-07-05.