Fair item allocation is a kind of the fair division problem in which the items to divide are discrete rather than continuous. The items have to be divided among several partners who potentially value them differently, and each item has to be given as a whole to a single person.[1] This situation arises in various real-life scenarios:
- Several heirs want to divide the inherited property, which contains e.g. a house, a car, a piano and several paintings.
- Several lecturers want to divide the courses given in their faculty. Each lecturer can teach one or more whole courses.
- White elephant gift exchange parties
The indivisibility of the items implies that a fair division may not be possible. As an extreme example, if there is only a single item (e.g. a house), it must be given to a single partner, but this is not fair to the other partners. This is in contrast to the fair cake-cutting problem, where the dividend is divisible and a fair division always exists. In some cases, the indivisibility problem can be mitigated by introducing monetary payments or time-based rotation, or by discarding some of the items.[2]: 285 But such solutions are not always available.
An item assignment problem has several ingredients:
- The partners have to express their preferences for the different item-bundles.
- The group should decide on a fairness criterion.
- Based on the preferences and the fairness criterion, a fair assignment algorithm should be executed to calculate a fair division.
These ingredients are explained in detail below.
Preferences
Combinatorial preferences
A naive way to determine the preferences is asking each partner to supply a numeric value for each possible bundle. For example, if the items to divide are a car and a bicycle, a partner may value the car as 800, the bicycle as 200, and the bundle {car, bicycle} as 900 (see Utility functions on indivisible goods for more examples). There are two problems with this approach:
- It may be difficult for a person to calculate exact numeric values to the bundles.
- The number of possible bundles can be huge: if there are items then there are possible bundles. For example, if there are 16 items then each partner will have to present their preferences using 65536 numbers.
The first problem motivates the use of ordinal utility rather than cardinal utility. In the ordinal model, each partner should only express a ranking over the different bundles, i.e., say which bundle is the best, which is the second-best, and so on. This may be easier than calculating exact numbers, but it is still difficult if the number of items is large.
The second problem is often handled by working with individual items rather than bundles:
- In the cardinal approach, each partner should report a numeric valuation for each item;
- In the ordinal approach, each partner should report a ranking over the items, i.e., say which item is the best, which is the second-best, etc.
Under suitable assumptions, it is possible to lift the preferences on items to preferences on bundles. [3]: 44–48 Then, the agents report their valuations/rankings on individual items, and the algorithm calculates for them their valuations/rankings on bundles.
Additive preferences
To make the item-assignment problem simpler, it is common to assume that all items are independent goods (so they are not substitute goods nor complementary goods). [4] Then:
- In the cardinal approach, each agent has an additive utility function (also called: modular utility function). Once the agent reports a value for each individual item, it is easy to calculate the value of each bundle by summing up the values of its items.
- In the ordinal approach, additivity allows us to infer some rankings between bundles. For example, if a person prefers w to x to y to z, then he necessarily prefers {w,x} to {w,y} or to {x,y}, and {w,y} to {x}. This inference is only partial, e.g., we cannot know whether the agent prefers {w} to {x,y} or even {w,z} to {x,y}.[5][6]
The additivity implies that each partner can always choose a "preferable item" from the set of items on the table, and this choice is independent of the other items that the partner may have. This property is used by some fair assignment algorithms that will be described next.[2]: 287–288
Compact preference representation languages
Compact preference representation languages have been developed as a compromise between the full expressiveness of combinatorial preferences to the simplicity of additive preferences. They provide a succinct representation to some natural classes of utility functions that are more general than additive utilities (but not as general as combinatorial utilities). Some examples are:[2]: 289–294
- 2-additive preferences: each partner reports a value for each bundle of size at most 2. The value of a bundle is calculated by summing the values for the individual items in the bundle and adding the values of pairs in the bundle. Typically, when there are substitute items, the values of pairs will be negative, and when there are complementary items, the values of pairs will be positive. This idea can be generalized to k-additive preferences for every positive integer k.
- Graphical models: for each partner, there is a graph that represents the dependencies between different items. In the cardinal approach, a common tool is the GAI net (Generalized Additive Independence). In the ordinal approach, a common tool is the CP net (Conditional Preferences) and its extensions: TCP net, UCP net, CP theory, CI net (Conditional Importance) and SCI net (a simplification of CI net).
- Logic based languages: each partner describes some bundles using a first order logic formula, and may assign a value for each formula. For example, a partner may say: "For (x or (y and z)), my value is 5". This means that the agent has a value of 5 for any of the bundles: x, xy, xz, yz, xyz.
- Bidding languages: many languages for representing combinatorial preferences have been studied in the context of combinatorial auctions. Some of these languages can be adapted to the item assignment setting.
Fairness criteria
Individual guarantee criteria
An individual guarantee criterion is a criterion that should hold for each individual partner, as long as the partner truthfully reports his preferences. Five such criteria are presented below. They are ordered from the weakest to the strongest (assuming the valuations are additive):[7]
Maximin share
The maximin-share (also called: max-min-fair-share guarantee) of an agent is the most preferred bundle he could guarantee himself as divider in divide and choose against adversarial opponents. An allocation is called MMS-fair if every agent receives a bundle that he weakly prefers over his MMS.[8]
Proportional fair-share (PFS)
The proportional-fair-share of an agent is 1/n of his utility from the entire set of items. An allocation is called proportional if every agent receives a bundle worth at least his proportional-fair-share.
Min-max fair-share (mFS)
The min-max-fair-share of an agent is the minimal utility that she can hope to get from an allocation if all the other agents have the same preferences as her, when she always receives the best share. It is also the minimal utility that an agent can get for sure in the allocation game “Someone cuts, I choose first”. An allocation is mFS-fair if all agents receive a bundle that they weakly prefer over their mFS.[7] mFS-fairness can be described as the result of the following negotiation process. A certain allocation is suggested. Each agent can object to it by demanding that a different allocation be made by another agent, letting him choose first. Hence, an agent would object to an allocation only if in all partitions, there is a bundle that he strongly prefers over his current bundle. An allocation is mFS-fair iff no agent objects to it, i.e., for every agent there exists a partition in which all bundles are weakly worse than his current share.
For every agent with subadditive utility, the mFS is worth at least . Hence, every mFS-fair allocation is proportional. For every agent with superadditive utility, the MMSis worth at most . Hence, every proportional allocation is MMS-fair. Both inclusions are strict, even when every agent has additive utility. This is illustrated in the following example:[7]
- There are three agents and three items:
- Alice values the items as 2,2,2. For her, MMS=PFS=mFS=2.
- Bob values the items as 3,2,1. For him, MMS=1, PFS=2 and mFS=3.
- Carl values the items as 3,2,1. For him, MMS=1, PFS=2 and mFS=3.
- The possible allocations are as follows:
- Every allocation which gives an item to each agent is MMS-fair.
- Every allocation which gives the first and second items to Bob and Carl and the third item to Alice is proportional.
- No allocation is mFS-fair.
- There are three agents and three items:
The above implications do not hold when the agents' valuations are not sub/superadditive.[9]
Envy-freeness (EF)
Every agent weakly prefers his own bundle to any other bundle. Every envy-free allocation of all items is mFS-fair; this follows directly from the ordinal definitions and does not depend on additivity. If the valuations are additive, then an EF allocation is also proportional and MMS-fair. Otherwise, an EF allocation may be not proportional and even not MMS.[9] See envy-free item assignment for more details.
Competitive equilibrium from Equal Incomes (CEEI)
This criterion is based on the following argument: the allocation process should be considered as a search for an equilibrium between the supply (the set of objects, each one having a public price) and the demand (the agents’ desires, each agent having the same budget for buying the objects). A competitive equilibrium is reached when the supply matches the demand. The fairness argument is straightforward: prices and budgets are the same for everyone. CEEI implies EF regardless of additivity. When the agents' preferences are additive and strict (each bundle has a different value), CEEI implies Pareto efficiency.[7]
Several recently suggested fairness criteria are:[10]
Envy-freeness-except-1 (EF1)
For each two agents A and B, if we remove from the bundle of B the item most valuable for A, then A does not envy B (in other words, the "envy level" of A in B is at most the value of a single item). Under monotonicity, an EF1 allocation always exists.
Envy-freeness-except-cheapest (EFx)
For each two agents A and B, if we remove from the bundle of B the item least valuable for A, then A does not envy B. EFx is strictly stronger than EF1. It is not known whether EFx allocations always exist.
Global optimization criteria
A global optimization criterion evaluates a division based on a given social welfare function:
- The egalitarian social welfare is minimum utility of a single agent. An item assignment is called egalitarian-optimal if it attains the maximum possible egalitarian welfare, i.e., it maximizes the utility of the poorest agent. Since there can be several different allocations maximizing the smallest utility, egalitarian optimality is often refined to leximin-optimality: from the subset of allocations maximizing the smallest utility, it selects those allocations that maximize the second-smallest utility, then the third-smallest utility, and so on.
- The Nash social welfare is the product of the utilities of the agents. An assignment called Nash-optimal or Maximum-Nash-Welfare if it maximizes the product of utilities. Nash-optimal allocations have some nice fairness properties.[10]
An advantage of global optimization criteria over individual criteria is that welfare-maximizing allocations are Pareto efficient.
Allocation algorithms
Various algorithms for fair item allocation are surveyed in pages on specific fairness criteria:
- Maximin-share item allocation;
- Proportional item allocation;
- Minimax-share item allocation: The problem of calculating the mFS of an agent is coNP-complete. The problem of deciding whether an mFS allocation exists is in , but its exact computational complexity is still unknown.[7]
- Envy-free item allocation;
- Egalitarian item allocation;
- Nash-optimal allocation: [11] and [12] prove hardness of calculating utilitarian-optimal and Nash-optimal allocations. [13] present an approximation procedure for Nash-optimal allocations.
- Picking sequence: a simple protocol where the agents take turns in selecting items, based on some pre-specified sequence of turns. The goal is to design the picking-sequence in a way that maximizes the expected value of a social welfare function (e.g. egalitarian or utilitarian) under some probabilistic assumptions on the agents' valuations.
- Competitive equilibrium: various algorithms for finding a CE allocation are described in the article on Fisher market.
Variants and extensions
Different entitlements
In this variant, different agents are entitled to different fractions of the resource. A common use-case is dividing cabinet ministries among parties in the coalition.[14] It is common to assume that each party should receive ministries according to the number of seats it has in the parliament. The various fairness notions have to be adapted accordingly. Several classes of fairness notions were considered:
- Notions based on weighted competitive equilibrium; [15] [16]
- Notions based on weighted envy-freeness;[17] [18] [19]
- Notions based on weighted fair share;[20]
See also: Proportional cake-cutting with different entitlements.
Allocation to groups
In this variant, bundles are given not to individual agents but to groups of agents. Common use-cases are: dividing inheritance among families, or dividing facilities among departments in a university. All agents in the same group consume the same bundle, though they may value it differently. The classic item allocation setting corresponds to the special case in which all groups are singletons.
With groups, it may be impossible to guarantee unanimous fairness (fairness in the eyes of all agents in each group), so it is often relaxed to democratic fairness (fairness in the eyes of e.g. at least half the agents in each group).[21]
See also: Fair division among groups.
Allocation of public goods
In this variant, each item provides utility not only to a single agent but to all agents. Different agents may attribute different utilities to the same item. The group has to choose a subset of items satisfying some constraints, for example:
- At most k items can be selected. This variant is closely related to multiwinner voting, except that in multiwinner voting the number of elected candidates is usually much smaller than the number of voters, while in public goods allocation the number of chosen goods is usually much larger than the number of agents. An example is a public library that has to decide which books to purchase, respecting the preferences of the readers; the number of books is usually much larger than the number of readers.[22]
- The total cost of all items must not exceed a fixed budget. This variant is often known as participatory budgeting.
- The number of items should be as small as possible, subject to that all agents must agree that the chosen set is better than the non-chosen set. This variant is known as the agreeable subset problem.
- There may be general matroid constraints, matching constraints or knapsack constraints on the chosen set.[23]
Allocation of private goods can be seen as a special case of allocating public goods: given a private-goods problem with n agents and m items, where agent i values item j at vij, construct a public-goods problem with n*m items, where agent i values each item i,j at vij, and the other items at 0. Item i,j essentially represents the decision to give item j to agent i. This idea can be formalized to show a general reduction from private-goods allocation to public-goods allocation that retains the maximum Nash welfare allocation, as well as a similar reduction that retains the leximin optimal allocation.[22]
Common solution concepts for public goods allocation are core stability (which implies both Pareto-efficiency and proportionality),[23] maximum Nash welfare, leximin optimality and proportionality up to one item.[22]
Public decision making
In this variant, several agents have to accept decisions on several issues. A common use-case is a family that has to decide what activity to do each day (here each issue is a day). Each agent assigns different utilities to the various options in each issue. The classic item allocation setting corresponds to the special case in which each issue corresponds to an item, each decision option corresponds to giving that item to a particular agent, and the agents' utilities are zero for all options in which the item is given to someone else. In this case, proportionality means that the utility of each agent is at least 1/n of his "dictatorship utility", i.e., the utility he could get by picking the best option in each issue. Proportionality might be unattainable, but PROP1 is attainable by Round-robin item allocation.[24]
See also: multi-issue voting.
Repeated allocation
Often, the same items are allocated repeatedly. For example, recurring house chores. If the number of repetitions is a multiple of the number of agents, then it is possible to find in polynomial time a sequence of allocations that is envy-free and complete, and to find in exponential time a sequence that is proportional and Pareto-optimal. But, an envy-free and Pareto-optimal sequence may not exist. With two agents, if the number of repetitions is even, it is always possible to find a sequence that is envy-free and Pareto-optimal.[25]
Stochastic allocations of indivisible goods
Stochastic allocations of indivisible goods[26] is a type of fair item allocation in which a solution describes a probability distribution over the set of deterministic allocations.
Assume that items should be distibuted between agents. Formally, in the deterministic setting, a solution describes a feasible allocation of the items to the agents — a partition of the set of items into subsets (one for each agent). The set of all deterministic allocations can be described as follows:
In the stochastic setting, a solution is a probability distribution over the set . That is, the set of all stochastic allocations (i.e., all feasible solutions to the problem) can be described as follows:
There are two functions related to each agent, a utility function associated with a deterministic allocation ; and an expected utility function associated with a stochastic allocation which defined according to as follows:
Fairness criteria
The same criteria that are suggested for deterministic setting can also be considered in the stochastic setting:
- Utilitarian rule: this rule says that society should choose the solution that maximize the sum of utilities. That is, to choose a stochastic allocation that maximizes the utilitarian walfare: Kawase and Sumita[27] show that maximization of the utilitarian welfare in the stochastic setting can always be achieved with a deterministic allocation. The reason is that the utilitarian value of the deterministic allocation is at least the utilitarian value of :
- Egalitarian rule: this rule says that society should choose the solution that maximize the utility of the poorest. That is, to choose a stochastic allocation that maximizes the egalitarian walfare: In contrast to the utilitarian rule, here, the stochastic setting allows society to achieve higher value[28] — as an example, consider the case where are two identical agents and only one item that worth 100. It is easy to see that in the deterministic setting the egalitarian value is , while in the stochastic setting it is .
- Hardness: Kawase and Sumita[29] prove that finding a stochastic allocation that maximizes the eqalitarian welfare is NP-hard even when agents' utilities are all budget-additive; and also, that it is NP-hard to approximate the eqalitarian welfare to a factor better than even when all agents have the same submodular utility function.
- Algorithm: Kawase and Sumita[30] present an algorithm that, given an algorithm for finding a deterministic allocation that approximates the utilitarian welfare to a factor , finds a stochastic allocation that approximates the egalitarian welfare to the same factor .
See also
- Bin covering problem and Bin packing problem - two well-studied optimization problems that can be seen as special cases of indivisible goods allocation and indivisible chores allocation, respectively. Many techniques used for these problems are useful in the case of fair item allocation, too.
- Fair division experiments - including some case-studies and lab experiments related to fair item assignment.
- Rental harmony - a fair division problem where indivisible items and a fixed total cost have to be divided simultaneously.
- Fair random assignment - a fair division problem without money, in which fairness is attained through randomization.
- House allocation problem - a fair division problem in which each agent should get exactly one object, with neither monetary transfers nor randomization.
- Price of fairness - a general measure of the trade-off between fairness and efficiency, with some results about the item assignment setting.
- Fair subset sum problem
- 17-animal inheritance puzzle
References
- ↑ Demko, Stephen; Hill, Theodore P. (1988-10-01). "Equitable distribution of indivisible objects". Mathematical Social Sciences. 16 (2): 145–158. doi:10.1016/0165-4896(88)90047-9. ISSN 0165-4896.
- 1 2 3 Sylvain Bouveret and Yann Chevaleyre and Nicolas Maudet, "Fair Allocation of Indivisible Goods". Chapter 12 in: Brandt, Felix; Conitzer, Vincent; Endriss, Ulle; Lang, Jérôme; Procaccia, Ariel D. (2016). Handbook of Computational Social Choice. Cambridge University Press. ISBN 9781107060432. (free online version)
- ↑ Barberà, S.; Bossert, W.; Pattanaik, P. K. (2004). "Ranking sets of objects." (PDF). Handbook of utility theory. Springer US.
- ↑ Sylvain Bouveret; Ulle Endriss; Jérôme Lang (2010). Fair Division Under Ordinal Preferences: Computing Envy-Free Allocations of Indivisible Goods. Proceedings of the 2010 conference on ECAI 2010: 19th European Conference on Artificial Intelligence. Retrieved 26 August 2016.
- ↑ Brams, Steven J.; Edelman, Paul H.; Fishburn, Peter C. (2003). "Fair Division of Indivisible Items". Theory and Decision. 55 (2): 147. doi:10.1023/B:THEO.0000024421.85722.0a. S2CID 153943630.
- ↑ Brams, S. J. (2005). "Efficient Fair Division: Help the Worst off or Avoid Envy?". Rationality and Society. 17 (4): 387–421. CiteSeerX 10.1.1.118.9114. doi:10.1177/1043463105058317. S2CID 154808734.
- 1 2 3 4 5 Bouveret, Sylvain; Lemaître, Michel (2015). "Characterizing conflicts in fair division of indivisible goods using a scale of criteria". Autonomous Agents and Multi-Agent Systems. 30 (2): 259. doi:10.1007/s10458-015-9287-3. S2CID 16041218.
- ↑ Budish, E. (2011). "The Combinatorial Assignment Problem: Approximate Competitive Equilibrium from Equal Incomes". Journal of Political Economy. 119 (6): 1061–1103. CiteSeerX 10.1.1.357.9766. doi:10.1086/664613. S2CID 154703357.
- 1 2 Heinen, Tobias; Nguyen, Nhan-Tam; Rothe, Jörg (2015). "Fairness and Rank-Weighted Utilitarianism in Resource Allocation". Algorithmic Decision Theory. Lecture Notes in Computer Science. Vol. 9346. p. 521. doi:10.1007/978-3-319-23114-3_31. ISBN 978-3-319-23113-6.
- 1 2 Caragiannis, Ioannis; Kurokawa, David; Moulin, Hervé; Procaccia, Ariel D.; Shah, Nisarg; Wang, Junxing (2016). The Unreasonable Fairness of Maximum Nash Welfare (PDF). Proceedings of the 2016 ACM Conference on Economics and Computation - EC '16. p. 305. doi:10.1145/2940716.2940726. ISBN 9781450339360.
- ↑ Nguyen, Trung Thanh; Roos, Magnus; Rothe, Jörg (2013). "A survey of approximability and inapproximability results for social welfare optimization in multiagent resource allocation". Annals of Mathematics and Artificial Intelligence. 68 (1–3): 65–90. CiteSeerX 10.1.1.671.3497. doi:10.1007/s10472-012-9328-4. S2CID 6864410.
- ↑ Nguyen, Nhan-Tam; Nguyen, Trung Thanh; Roos, Magnus; Rothe, Jörg (2013). "Computational complexity and approximability of social welfare optimization in multiagent resource allocation". Autonomous Agents and Multi-Agent Systems. 28 (2): 256. doi:10.1007/s10458-013-9224-2. S2CID 442666.
- ↑ Trung Thanh Nguyen; Jörg Rothe (2013). Envy-ratio and average-nash social welfare optimization in multiagent resource allocation. AAMAS 13.
- ↑ Brams, Steven J.; Kaplan, Todd R. (2004). "Dividing the Indivisible". Journal of Theoretical Politics. 16 (2): 143. doi:10.1177/0951629804041118. hdl:10036/26974. S2CID 154854134.
- ↑ Babaioff, Moshe; Nisan, Noam; Talgam-Cohen, Inbal (2017-03-23). "Competitive Equilibrium with Indivisible Goods and Generic Budgets". arXiv:1703.08150 [cs.GT].
- ↑ Segal-Halevi, Erel (2018-07-09). "Competitive Equilibrium For almost All Incomes". Proceedings of AAMAS 2018. Aamas '18. International Foundation for Autonomous Agents and Multiagent Systems. pp. 1267–1275.
- ↑ Chakraborty, Mithun; Igarashi, Ayumi; Suksompong, Warut; Zick, Yair (2021-08-16). "Weighted Envy-freeness in Indivisible Item Allocation". ACM Transactions on Economics and Computation. 9 (3): 18:1–18:39. arXiv:1909.10502. doi:10.1145/3457166. ISSN 2167-8375. S2CID 202719373.
- ↑ Chakraborty, Mithun; Schmidt-Kraepelin, Ulrike; Suksompong, Warut (2021-12-01). "Picking sequences and monotonicity in weighted fair division". Artificial Intelligence. 301: 103578. arXiv:2104.14347. doi:10.1016/j.artint.2021.103578. ISSN 0004-3702. S2CID 233443832.
- ↑ Chakraborty, Mithun; Segal-Halevi, Erel; Suksompong, Warut (2022-06-28). "Weighted Fairness Notions for Indivisible Items Revisited". Proceedings of the AAAI Conference on Artificial Intelligence. 36 (5): 4949–4956. arXiv:2112.04166. doi:10.1609/aaai.v36i5.20425. ISSN 2374-3468. S2CID 244954009.
- ↑ Babaioff, Moshe; Ezra, Tomer; Feige, Uriel (2021-11-15). "Fair-Share Allocations for Agents with Arbitrary Entitlements". arXiv:2103.04304 [cs.GT].
- ↑ Segal-Halevi, Erel; Suksompong, Warut (2019-12-01). "Democratic fair allocation of indivisible goods". Artificial Intelligence. 277: 103167. arXiv:1709.02564. doi:10.1016/j.artint.2019.103167. ISSN 0004-3702. S2CID 203034477.
- 1 2 3 Garg, Jugal; Kulkarni, Pooja; Murhekar, Aniket (2021). Bojańczy, Miko\laj; Chekuri, Chandra (eds.). "On Fair and Efficient Allocations of Indivisible Public Goods". 41st IARCS Annual Conference on Foundations of Software Technology and Theoretical Computer Science (FSTTCS 2021). Leibniz International Proceedings in Informatics (LIPIcs). Dagstuhl, Germany: Schloss Dagstuhl – Leibniz-Zentrum für Informatik. 213: 22:1–22:19. doi:10.4230/LIPIcs.FSTTCS.2021.22. ISBN 978-3-95977-215-0. S2CID 236154847.
- 1 2 Fain, Brandon; Munagala, Kamesh; Shah, Nisarg (2018-06-11). "Fair Allocation of Indivisible Public Goods". Proceedings of the 2018 ACM Conference on Economics and Computation. EC '18. New York, NY, USA: Association for Computing Machinery. pp. 575–592. doi:10.1145/3219166.3219174. ISBN 978-1-4503-5829-3. S2CID 3331859.
- ↑ Conitzer, Vincent; Freeman, Rupert; Shah, Nisarg (2016). "Fair Public Decision Making | Proceedings of the 2017 ACM Conference on Economics and Computation". arXiv:1611.04034. doi:10.1145/3033274.3085125. S2CID 30188911.
{{cite journal}}
: Cite journal requires|journal=
(help) - ↑ Igarashi, Ayumi; Lackner, Martin; Nardi, Oliviero; Novaro, Arianna (2023-04-04). "Repeated Fair Allocation of Indivisible Items". arXiv:2304.01644 [cs.GT].
- ↑ Kawase, Yasushi; Sumita, Hanna (2020). "On the Max-Min Fair Stochastic Allocation of Indivisible Goods". Proceedings of the AAAI Conference on Artificial Intelligence. 34 (2): 2070–2078. doi:10.1609/AAAI.V34I02.5580. S2CID 214407880.
- ↑ Kawase, Yasushi; Sumita, Hanna (2020). "On the Max-Min Fair Stochastic Allocation of Indivisible Goods". Proceedings of the AAAI Conference on Artificial Intelligence. 34 (2): 2070–2078. doi:10.1609/AAAI.V34I02.5580. S2CID 214407880.
- ↑ Kawase, Yasushi; Sumita, Hanna (2020). "On the Max-Min Fair Stochastic Allocation of Indivisible Goods". Proceedings of the AAAI Conference on Artificial Intelligence. 34 (2): 2070–2078. doi:10.1609/AAAI.V34I02.5580. S2CID 214407880.
- ↑ Kawase, Yasushi; Sumita, Hanna (2020). "On the Max-Min Fair Stochastic Allocation of Indivisible Goods". Proceedings of the AAAI Conference on Artificial Intelligence. 34 (2): 2070–2078. doi:10.1609/AAAI.V34I02.5580. S2CID 214407880.
- ↑ Kawase, Yasushi; Sumita, Hanna (2020). "On the Max-Min Fair Stochastic Allocation of Indivisible Goods". Proceedings of the AAAI Conference on Artificial Intelligence. 34 (2): 2070–2078. doi:10.1609/AAAI.V34I02.5580. S2CID 214407880.