In mathematical analysis, a family of functions is equicontinuous if all the functions are continuous and they have equal variation over a given neighbourhood, in a precise sense described herein. In particular, the concept applies to countable families, and thus sequences of functions.
Equicontinuity appears in the formulation of Ascoli's theorem, which states that a subset of C(X), the space of continuous functions on a compact Hausdorff space X, is compact if and only if it is closed, pointwise bounded and equicontinuous. As a corollary, a sequence in C(X) is uniformly convergent if and only if it is equicontinuous and converges pointwise to a function (not necessarily continuous a-priori). In particular, the limit of an equicontinuous pointwise convergent sequence of continuous functions fn on either metric space or locally compact space[1] is continuous. If, in addition, fn are holomorphic, then the limit is also holomorphic.
The uniform boundedness principle states that a pointwise bounded family of continuous linear operators between Banach spaces is equicontinuous.[2]
Equicontinuity between metric spaces
Let X and Y be two metric spaces, and F a family of functions from X to Y. We shall denote by d the respective metrics of these spaces.
The family F is equicontinuous at a point x0 ∈ X if for every ε > 0, there exists a δ > 0 such that d(ƒ(x0), ƒ(x)) < ε for all ƒ ∈ F and all x such that d(x0, x) < δ. The family is pointwise equicontinuous if it is equicontinuous at each point of X.[3]
The family F is uniformly equicontinuous if for every ε > 0, there exists a δ > 0 such that d(ƒ(x1), ƒ(x2)) < ε for all ƒ ∈ F and all x1, x2 ∈ X such that d(x1, x2) < δ.[4]
For comparison, the statement 'all functions ƒ in F are continuous' means that for every ε > 0, every ƒ ∈ F, and every x0 ∈ X, there exists a δ > 0 such that d(ƒ(x0), ƒ(x)) < ε for all x ∈ X such that d(x0, x) < δ.
- For continuity, δ may depend on ε, ƒ, and x0.
- For uniform continuity, δ may depend on ε and ƒ.
- For pointwise equicontinuity, δ may depend on ε and x0.
- For uniform equicontinuity, δ may depend only on ε.
More generally, when X is a topological space, a set F of functions from X to Y is said to be equicontinuous at x if for every ε > 0, x has a neighborhood Ux such that
for all y ∈ Ux and ƒ ∈ F. This definition usually appears in the context of topological vector spaces.
When X is compact, a set is uniformly equicontinuous if and only if it is equicontinuous at every point, for essentially the same reason as that uniform continuity and continuity coincide on compact spaces. Used on its own, the term "equicontinuity" may refer to either the pointwise or uniform notion, depending on the context. On a compact space, these notions coincide.
Some basic properties follow immediately from the definition. Every finite set of continuous functions is equicontinuous. The closure of an equicontinuous set is again equicontinuous. Every member of a uniformly equicontinuous set of functions is uniformly continuous, and every finite set of uniformly continuous functions is uniformly equicontinuous.
Examples
- A set of functions with a common Lipschitz constant is (uniformly) equicontinuous. In particular, this is the case if the set consists of functions with derivatives bounded by the same constant.
- Uniform boundedness principle gives a sufficient condition for a set of continuous linear operators to be equicontinuous.
- A family of iterates of an analytic function is equicontinuous on the Fatou set.[5][6]
Counterexamples
- The sequence of functions fn(x) = arctan(nx), is not equicontinuous because the definition is violated at x0=0.
Equicontinuity of maps valued in topological groups
Suppose that T is a topological space and Y is an additive topological group (i.e. a group endowed with a topology making its operations continuous). Topological vector spaces are prominent examples of topological groups and every topological group has an associated canonical uniformity.
- Definition:[7] A family H of maps from T into Y is said to be equicontinuous at t ∈ T if for every neighborhood V of 0 in Y, there exists some neighborhood U of t in T such that h(U) ⊆ h(t) + V for every h ∈ H. We say that H is equicontinuous if it is equicontinuous at every point of T.
Note that if H is equicontinuous at a point then every map in H is continuous at the point. Clearly, every finite set of continuous maps from T into Y is equicontinuous.
Equicontinuous linear maps
Because every topological vector space (TVS) is a topological group so the definition of an equicontinuous family of maps given for topological groups transfers to TVSs without change.
Characterization of equicontinuous linear maps
A family of maps of the form between two topological vector spaces is said to be equicontinuous at a point if for every neighborhood of the origin in there exists some neighborhood of the origin in such that for all
If is a family of maps and is a set then let With notation, if and are sets then for all if and only if
Let and be topological vector spaces (TVSs) and be a family of linear operators from into Then the following are equivalent:
- is equicontinuous;
- is equicontinuous at every point of
- is equicontinuous at some point of
- is equicontinuous at the origin.
- that is, for every neighborhood of the origin in there exists a neighborhood of the origin in such that (or equivalently, for every ).
[8]
- for every neighborhood of the origin in is a neighborhood of the origin in
- the closure of in is equicontinuous.
- denotes endowed with the topology of point-wise convergence.
- the balanced hull of is equicontinuous.
while if is locally convex then this list may be extended to include:
- the convex hull of is equicontinuous.[9]
- the convex balanced hull of is equicontinuous.[10][9]
while if and are locally convex then this list may be extended to include:
- for every continuous seminorm on there exists a continuous seminorm on such that for all [9]
- Here, means that for all
while if is barreled and is locally convex then this list may be extended to include:
- is bounded in ;[11]
- is bounded in [11]
- denotes endowed with the topology of bounded convergence (that is, uniform convergence on bounded subsets of
while if and are Banach spaces then this list may be extended to include:
- (that is, is uniformly bounded in the operator norm).
Characterization of equicontinuous linear functionals
Let be a topological vector space (TVS) over the field with continuous dual space A family of linear functionals on is said to be equicontinuous at a point if for every neighborhood of the origin in there exists some neighborhood of the origin in such that for all
For any subset the following are equivalent:[9]
- is equicontinuous.
- is equicontinuous at the origin.
- is equicontinuous at some point of
- is contained in the polar of some neighborhood of the origin in [10]
- the (pre)polar of is a neighborhood of the origin in
- the weak* closure of in is equicontinuous.
- the balanced hull of is equicontinuous.
- the convex hull of is equicontinuous.
- the convex balanced hull of is equicontinuous.[10]
while if is normed then this list may be extended to include:
- is a strongly bounded subset of [10]
while if is a barreled space then this list may be extended to include:
- is relatively compact in the weak* topology on [11]
- is weak* bounded (that is, is bounded in ).[11]
- is bounded in the topology of bounded convergence (that is, is bounded in ).[11]
Properties of equicontinuous linear maps
The uniform boundedness principle (also known as the Banach–Steinhaus theorem) states that a set of linear maps between Banach spaces is equicontinuous if it is pointwise bounded; that is, for each The result can be generalized to a case when is locally convex and is a barreled space.[12]
Properties of equicontinuous linear functionals
Alaoglu's theorem implies that the weak-* closure of an equicontinuous subset of is weak-* compact; thus that every equicontinuous subset is weak-* relatively compact.[13][9]
If is any locally convex TVS, then the family of all barrels in and the family of all subsets of that are convex, balanced, closed, and bounded in correspond to each other by polarity (with respect to ).[14] It follows that a locally convex TVS is barreled if and only if every bounded subset of is equicontinuous.[14]
Equicontinuity and uniform convergence
Let X be a compact Hausdorff space, and equip C(X) with the uniform norm, thus making C(X) a Banach space, hence a metric space. Then Arzelà–Ascoli theorem states that a subset of C(X) is compact if and only if it is closed, uniformly bounded and equicontinuous. [15] This is analogous to the Heine–Borel theorem, which states that subsets of Rn are compact if and only if they are closed and bounded.[16] As a corollary, every uniformly bounded equicontinuous sequence in C(X) contains a subsequence that converges uniformly to a continuous function on X.
In view of Arzelà–Ascoli theorem, a sequence in C(X) converges uniformly if and only if it is equicontinuous and converges pointwise. The hypothesis of the statement can be weakened a bit: a sequence in C(X) converges uniformly if it is equicontinuous and converges pointwise on a dense subset to some function on X (not assumed continuous).
Suppose fj is an equicontinuous sequence of continuous functions on a dense subset D of X. Let ε > 0 be given. By equicontinuity, for each z ∈ D, there exists a neighborhood Uz of z such that
for all j and x ∈ Uz. By denseness and compactness, we can find a finite subset D′ ⊂ D such that X is the union of Uz over z ∈ D′. Since fj converges pointwise on D′, there exists N > 0 such that
whenever z ∈ D′ and j, k > N. It follows that
for all j, k > N. In fact, if x ∈ X, then x ∈ Uz for some z ∈ D′ and so we get:
- .
Hence, fj is Cauchy in C(X) and thus converges by completeness.
This weaker version is typically used to prove Arzelà–Ascoli theorem for separable compact spaces. Another consequence is that the limit of an equicontinuous pointwise convergent sequence of continuous functions on a metric space, or on a locally compact space, is continuous. (See below for an example.) In the above, the hypothesis of compactness of X cannot be relaxed. To see that, consider a compactly supported continuous function g on R with g(0) = 1, and consider the equicontinuous sequence of functions {ƒn} on R defined by ƒn(x) = g(x − n). Then, ƒn converges pointwise to 0 but does not converge uniformly to 0.
This criterion for uniform convergence is often useful in real and complex analysis. Suppose we are given a sequence of continuous functions that converges pointwise on some open subset G of Rn. As noted above, it actually converges uniformly on a compact subset of G if it is equicontinuous on the compact set. In practice, showing the equicontinuity is often not so difficult. For example, if the sequence consists of differentiable functions or functions with some regularity (e.g., the functions are solutions of a differential equation), then the mean value theorem or some other kinds of estimates can be used to show the sequence is equicontinuous. It then follows that the limit of the sequence is continuous on every compact subset of G; thus, continuous on G. A similar argument can be made when the functions are holomorphic. One can use, for instance, Cauchy's estimate to show the equicontinuity (on a compact subset) and conclude that the limit is holomorphic. Note that the equicontinuity is essential here. For example, ƒn(x) = arctan n x converges to a multiple of the discontinuous sign function.
Generalizations
Equicontinuity in topological spaces
The most general scenario in which equicontinuity can be defined is for topological spaces whereas uniform equicontinuity requires the filter of neighbourhoods of one point to be somehow comparable with the filter of neighbourhood of another point. The latter is most generally done via a uniform structure, giving a uniform space. Appropriate definitions in these cases are as follows:
- A set A of functions continuous between two topological spaces X and Y is topologically equicontinuous at the points x ∈ X and y ∈ Y if for any open set O about y, there are neighborhoods U of x and V of y such that for every f ∈ A, if the intersection of f[U] and V is nonempty, f[U] ⊆ O. Then A is said to be topologically equicontinuous at x ∈ X if it is topologically equicontinuous at x and y for each y ∈ Y. Finally, A is equicontinuous if it is equicontinuous at x for all points x ∈ X.
- A set A of continuous functions between two uniform spaces X and Y is uniformly equicontinuous if for every element W of the uniformity on Y, the set
- { (u,v) ∈ X × X: for all f ∈ A. (f(u),f(v)) ∈ W }
- is a member of the uniformity on X
- Introduction to uniform spaces
We now briefly describe the basic idea underlying uniformities.
The uniformity 𝒱 is a non-empty collection of subsets of Y × Y where, among many other properties, every V ∈ 𝒱, V contains the diagonal of Y (i.e. {(y, y) ∈ Y}). Every element of 𝒱 is called an entourage.
Uniformities generalize the idea (taken from metric spaces) of points that are "r-close" (for r > 0), meaning that their distance is < r. To clarify this, suppose that (Y, d) is a metric space (so the diagonal of Y is the set {(y, z) ∈ Y × Y : d(y, z) = 0}) For any r > 0, let
- Ur = {(y, z) ∈ Y × Y : d(y, z) < r}
denote the set of all pairs of points that are r-close. Note that if we were to "forget" that d existed then, for any r > 0, we would still be able to determine whether or not two points of Y are r-close by using only the sets Ur. In this way, the sets Ur encapsulate all the information necessary to define things such as uniform continuity and uniform convergence without needing any metric. Axiomatizing the most basic properties of these sets leads to the definition of a uniformity. Indeed, the sets Ur generate the uniformity that is canonically associated with the metric space (Y, d).
The benefit of this generalization is that we may now extend some important definitions that make sense for metric spaces (e.g. completeness) to a broader category of topological spaces. In particular, to topological groups and topological vector spaces.
- A weaker concept is that of even continuity
- A set A of continuous functions between two topological spaces X and Y is said to be evenly continuous at x ∈ X and y ∈ Y if given any open set O containing y there are neighborhoods U of x and V of y such that f[U] ⊆ O whenever f(x) ∈ V. It is evenly continuous at x if it is evenly continuous at x and y for every y ∈ Y, and evenly continuous if it is evenly continuous at x for every x ∈ X.
Stochastic equicontinuity
Stochastic equicontinuity is a version of equicontinuity used in the context of sequences of functions of random variables, and their convergence.[17]
See also
- Absolute continuity – Form of continuity for functions
- Classification of discontinuities – Mathematical analysis of discontinuous points
- Coarse function
- Continuous function – Mathematical function with no sudden changes
- Continuous function (set theory) – sequence of ordinals such that the values assumed at limit stages are the limits (limit suprema and limit infima) of all values at previous stages
- Continuous stochastic process – Stochastic process that is a continuous function of time or index parameter
- Dini continuity
- Direction-preserving function - an analogue of a continuous function in discrete spaces.
- Microcontinuity – Mathematical term
- Normal function – Function of ordinals in mathematics
- Piecewise – Function defined by multiple sub-functions
- Symmetrically continuous function
- Uniform continuity – Uniform restraint of the change in functions
Notes
- ↑ More generally, on any compactly generated space; e.g., a first-countable space.
- ↑ Rudin 1991, p. 44 §2.5.
- ↑ Reed & Simon (1980), p. 29; Rudin (1987), p. 245
- ↑ Reed & Simon (1980), p. 29
- ↑ Alan F. Beardon, S. Axler, F.W. Gehring, K.A. Ribet : Iteration of Rational Functions: Complex Analytic Dynamical Systems. Springer, 2000; ISBN 0-387-95151-2, ISBN 978-0-387-95151-5; page 49
- ↑ Joseph H. Silverman : The arithmetic of dynamical systems. Springer, 2007. ISBN 0-387-69903-1, ISBN 978-0-387-69903-5; page 22
- ↑ Narici & Beckenstein 2011, pp. 133–136.
- ↑ Rudin 1991, p. 44 Theorem 2.4.
- 1 2 3 4 5 Narici & Beckenstein 2011, pp. 225–273.
- 1 2 3 4 Trèves 2006, pp. 335–345.
- 1 2 3 4 5 Trèves 2006, pp. 346–350.
- ↑ Schaefer 1966, Theorem 4.2.
- ↑ Schaefer 1966, Corollary 4.3.
- 1 2 3 Schaefer & Wolff 1999, pp. 123–128.
- ↑ Rudin 1991, p. 394 Appendix A5.
- ↑ Rudin 1991, p. 18 Theorem 1.23.
- ↑ de Jong, Robert M. (1993). "Stochastic Equicontinuity for Mixing Processes". Asymptotic Theory of Expanding Parameter Space Methods and Data Dependence in Econometrics. Amsterdam. pp. 53–72. ISBN 90-5170-227-2.
{{cite book}}
: CS1 maint: location missing publisher (link)
References
- "Equicontinuity", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
- Reed, Michael; Simon, Barry (1980), Functional Analysis (revised and enlarged ed.), Boston, MA: Academic Press, ISBN 978-0-12-585050-6.
- Narici, Lawrence; Beckenstein, Edward (2011). Topological Vector Spaces. Pure and applied mathematics (Second ed.). Boca Raton, FL: CRC Press. ISBN 978-1584888666. OCLC 144216834.
- Rudin, Walter (1991). Functional Analysis. International Series in Pure and Applied Mathematics. Vol. 8 (Second ed.). New York, NY: McGraw-Hill Science/Engineering/Math. ISBN 978-0-07-054236-5. OCLC 21163277.
- Rudin, Walter (1987), Real and Complex Analysis (3rd ed.), New York: McGraw-Hill.
- Schaefer, Helmut H. (1966), Topological vector spaces, New York: The Macmillan Company
- Schaefer, Helmut H.; Wolff, Manfred P. (1999). Topological Vector Spaces. GTM. Vol. 8 (Second ed.). New York, NY: Springer New York Imprint Springer. ISBN 978-1-4612-7155-0. OCLC 840278135.
- Trèves, François (2006) [1967]. Topological Vector Spaces, Distributions and Kernels. Mineola, N.Y.: Dover Publications. ISBN 978-0-486-45352-1. OCLC 853623322.