Efficient energy use, sometimes simply called energy efficiency, is the process of reducing the amount of energy required to provide products and services. For example, insulating a building allows it to use less heating and cooling energy to achieve and maintain a thermal comfort. Installing light-emitting diode bulbs, fluorescent lighting, or natural skylight windows reduces the amount of energy required to attain the same level of illumination compared to using traditional incandescent light bulbs. Improvements in energy efficiency are generally achieved by adopting a more efficient technology or production process[1] or by application of commonly accepted methods to reduce energy losses.

There are many motivations to improve energy efficiency. Decreasing energy use reduces energy costs and may result in a financial cost saving to consumers if the energy savings offset any additional costs of implementing an energy-efficient technology. Reducing energy use is also seen as a solution to the problem of minimizing greenhouse gas emissions. Improved energy efficiency in buildings, industrial processes and transportation could reduce the world's energy needs in 2050 by one third, and help reduce global emissions of greenhouse gases.[2] Another important solution is to remove government-led energy subsidies that promote high energy consumption and inefficient energy use in more than half of the countries in the world.[3]

Energy efficiency and renewable energy are said to be the twin pillars of sustainable energy policy[4] and are high priorities in the sustainable energy hierarchy. In many countries energy efficiency is also seen to have a national security benefit because it can be used to reduce the level of energy imports from foreign countries and may slow down the rate at which domestic energy resources are depleted.

Aims

Energy productivity, which measures the output and quality of goods and services per unit of energy input, can come from either reducing the amount of energy required to produce something, or from increasing the quantity or quality of goods and services from the same amount of energy.

From the point of view of an energy consumer, the main motivation of energy efficiency is often simply saving money by lowering the cost of purchasing energy. Additionally, from an energy policy point of view, there has been a long trend in a wider recognition of energy efficiency as the "first fuel", meaning the ability to replace or avoid the consumption of actual fuels. In fact, International Energy Agency has calculated that the application of energy efficiency measures in the years 1974-2010 has succeeded in avoiding more energy consumption in its member states than is the consumption of any particular fuel, including fossil fuels (i.e. oil, coal and natural gas).[5]

Moreover, it has long been recognized that energy efficiency brings other benefits additional to the reduction of energy consumption.[6] Some estimates of the value of these other benefits, often called multiple benefits, co-benefits, ancillary benefits or non-energy benefits, have put their summed value even higher than that of the direct energy benefits.[7]

These multiple benefits of energy efficiency include things such as reduced greenhouse gas emissions, reduced air pollution and improved health, and improved energy security. Methods for calculating the monetary value of these multiple benefits have been developed, including e.g. the choice experiment method for improvements that have a subjective component (such as aesthetics or comfort)[5] and Tuominen-Seppänen method for price risk reduction.[8][9] When included in the analysis, the economic benefit of energy efficiency investments can be shown to be significantly higher than simply the value of the saved energy.[5]

Energy efficiency has proved to be a cost-effective strategy for building economies without necessarily increasing energy consumption. For example, the state of California began implementing energy-efficiency measures in the mid-1970s, including building code and appliance standards with strict efficiency requirements. During the following years, California's energy consumption has remained approximately flat on a per capita basis while national US consumption doubled.[10] As part of its strategy, California implemented a "loading order" for new energy resources that puts energy efficiency first, renewable electricity supplies second, and new fossil-fired power plants last.[11] States such as Connecticut and New York have created quasi-public Green Banks to help residential and commercial building-owners finance energy efficiency upgrades that reduce emissions and cut consumers' energy costs.[12]

Energy conservation

Energy conservation is broader than energy efficiency in including active efforts to decrease energy consumption, for example through behaviour change, in addition to using energy more efficiently. Examples of conservation without efficiency improvements are heating a room less in winter, using the car less, air-drying your clothes instead of using the dryer, or enabling energy saving modes on a computer. As with other definitions, the boundary between efficient energy use and energy conservation can be fuzzy, but both are important in environmental and economic terms.[13]

Sustainable energy

Energy efficiency—using less energy to deliver the same goods or services, or delivering comparable services with less goods—is a cornerstone of many sustainable energy strategies.[14][15] The International Energy Agency (IEA) has estimated that increasing energy efficiency could achieve 40% of greenhouse gas emission reductions needed to fulfil the Paris Agreement's goals.[16] Energy can be conserved by increasing the technical efficiency of appliances, vehicles, industrial processes, and buildings.[17]

Unintended consequences

If the demand for energy services remains constant, improving energy efficiency will reduce energy consumption and carbon emissions. However, many efficiency improvements do not reduce energy consumption by the amount predicted by simple engineering models. This is because they make energy services cheaper, and so consumption of those services increases. For example, since fuel efficient vehicles make travel cheaper, consumers may choose to drive farther, thereby offsetting some of the potential energy savings. Similarly, an extensive historical analysis of technological efficiency improvements has conclusively shown that energy efficiency improvements were almost always outpaced by economic growth, resulting in a net increase in resource use and associated pollution.[18] These are examples of the direct rebound effect.[19]

Estimates of the size of the rebound effect range from roughly 5% to 40%.[20][21][22] The rebound effect is likely to be less than 30% at the household level and may be closer to 10% for transport.[19] A rebound effect of 30% implies that improvements in energy efficiency should achieve 70% of the reduction in energy consumption projected using engineering models.

Options

Appliances

Modern appliances, such as, freezers, ovens, stoves, dishwashers, clothes washers and dryers, use significantly less energy than older appliances. Current energy-efficient refrigerators, for example, use 40 percent less energy than conventional models did in 2001. Following this, if all households in Europe changed their more than ten-year-old appliances into new ones, 20 billion kWh of electricity would be saved annually, hence reducing CO2 emissions by almost 18 billion kg.[23] In the US, the corresponding figures would be 17 billion kWh of electricity and 27,000,000,000 lb (1.2×1010 kg) CO2.[24] According to a 2009 study from McKinsey & Company the replacement of old appliances is one of the most efficient global measures to reduce emissions of greenhouse gases.[25] Modern power management systems also reduce energy usage by idle appliances by turning them off or putting them into a low-energy mode after a certain time. Many countries identify energy-efficient appliances using energy input labeling.[26]

The impact of energy efficiency on peak demand depends on when the appliance is used. For example, an air conditioner uses more energy during the afternoon when it is hot. Therefore, an energy-efficient air conditioner will have a larger impact on peak demand than off-peak demand. An energy-efficient dishwasher, on the other hand, uses more energy during the late evening when people do their dishes. This appliance may have little to no impact on peak demand.

Over the period 2001–2021, tech companies have replaced traditional silicon switches in an electric circuit with quicker gallium nitride transistors to make new gadgets as energy efficient as feasible. Gallium nitride transistors are, however, more costly. This is a significant change in lowering the carbon footprint.[27][28][29]

Building design

Receiving a Gold rating for energy and environmental design in September 2011, the Empire State Building is the tallest and largest LEED certified building in the United States and Western Hemisphere,[30] though it will likely be overtaken by New York's own One World Trade Center.[31]

Buildings are an important field for energy efficiency improvements around the world because of their role as a major energy consumer. However, the question of energy use in buildings is not straightforward as the indoor conditions that can be achieved with energy use vary a lot. The measures that keep buildings comfortable, lighting, heating, cooling and ventilation, all consume energy. Typically the level of energy efficiency in a building is measured by dividing energy consumed with the floor area of the building which is referred to as specific energy consumption or energy use intensity:[32]

However, the issue is more complex as building materials have embodied energy in them. On the other hand, energy can be recovered from the materials when the building is dismantled by reusing materials or burning them for energy. Moreover, when the building is used, the indoor conditions can vary resulting in higher and lower quality indoor environments. Finally, overall efficiency is affected by the use of the building: is the building occupied most of the time and are spaces efficiently used — or is the building largely empty? It has even been suggested that for a more complete accounting of energy efficiency, specific energy consumption should be amended to include these factors:[33]

Thus a balanced approach to energy efficiency in buildings should be more comprehensive than simply trying to minimize energy consumed. Issues such as quality of indoor environment and efficiency of space use should be factored in. Thus the measures used to improve energy efficiency can take many different forms. Often they include passive measures that inherently reduce the need to use energy, such as better insulation. Many serve various functions improving the indoor conditions as well as reducing energy use, such as increased use of natural light.

A building's location and surroundings play a key role in regulating its temperature and illumination. For example, trees, landscaping, and hills can provide shade and block wind. In cooler climates, designing northern hemisphere buildings with south facing windows and southern hemisphere buildings with north facing windows increases the amount of sun (ultimately heat energy) entering the building, minimizing energy use, by maximizing passive solar heating. Tight building design, including energy-efficient windows, well-sealed doors, and additional thermal insulation of walls, basement slabs, and foundations can reduce heat loss by 25 to 50 percent.[26][34]

Dark roofs may become up to 39 °C (70 °F) hotter than the most reflective white surfaces. They transmit some of this additional heat inside the building. US Studies have shown that lightly colored roofs use 40 percent less energy for cooling than buildings with darker roofs. White roof systems save more energy in sunnier climates. Advanced electronic heating and cooling systems can moderate energy consumption and improve the comfort of people in the building.[26]

Proper placement of windows and skylights as well as the use of architectural features that reflect light into a building can reduce the need for artificial lighting. Increased use of natural and task lighting has been shown by one study to increase productivity in schools and offices.[26] Compact fluorescent lamps use two-thirds less energy and may last 6 to 10 times longer than incandescent light bulbs. Newer fluorescent lights produce a natural light, and in most applications they are cost effective, despite their higher initial cost, with payback periods as low as a few months. LED lamps use only about 10% of the energy an incandescent lamp requires.

Effective energy-efficient building design can include the use of low cost passive infra reds to switch-off lighting when areas are unoccupied such as toilets, corridors or even office areas out-of-hours. In addition, lux levels can be monitored using daylight sensors linked to the building's lighting scheme to switch on/off or dim the lighting to pre-defined levels to take into account the natural light and thus reduce consumption. Building management systems link all of this together in one centralised computer to control the whole building's lighting and power requirements.[35]

In an analysis that integrates a residential bottom-up simulation with an economic multi-sector model, it has been shown that variable heat gains caused by insulation and air-conditioning efficiency can have load-shifting effects that are not uniform on the electricity load. The study also highlighted the impact of higher household efficiency on the power generation capacity choices that are made by the power sector.[36]

The choice of which space heating or cooling technology to use in buildings can have a significant impact on energy use and efficiency. For example, replacing an older 50% efficient natural gas furnace with a new 95% efficient one will dramatically reduce energy use, carbon emissions, and winter natural gas bills. Ground source heat pumps can be even more energy-efficient and cost-effective. These systems use pumps and compressors to move refrigerant fluid around a thermodynamic cycle in order to "pump" heat against its natural flow from hot to cold, for the purpose of transferring heat into a building from the large thermal reservoir contained within the nearby ground. The result is that heat pumps typically use four times less electrical energy to deliver an equivalent amount of heat than a direct electrical heater does. Another advantage of a ground source heat pump is that it can be reversed in summertime and operate to cool the air by transferring heat from the building to the ground. The disadvantage of ground source heat pumps is their high initial capital cost, but this is typically recouped within five to ten years as a result of lower energy use.

Smart meters are slowly being adopted by the commercial sector to highlight to staff and for internal monitoring purposes the building's energy usage in a dynamic presentable format. The use of power quality analysers can be introduced into an existing building to assess usage, harmonic distortion, peaks, swells and interruptions amongst others to ultimately make the building more energy-efficient. Often such meters communicate by using wireless sensor networks.

Green Building XML is an emerging scheme, a subset of the Building Information Modeling efforts, focused on green building design and operation. It is used as input in several energy simulation engines. But with the development of modern computer technology, a large number of building performance simulation tools are available on the market. When choosing which simulation tool to use in a project, the user must consider the tool's accuracy and reliability, considering the building information they have at hand, which will serve as input for the tool. Yezioro, Dong and Leite[37] developed an artificial intelligence approach towards assessing building performance simulation results and found that more detailed simulation tools have the best simulation performance in terms of heating and cooling electricity consumption within 3% of mean absolute error.

Leadership in Energy and Environmental Design (LEED) is a rating system organized by the US Green Building Council (USGBC) to promote environmental responsibility in building design. They currently offer four levels of certification for existing buildings (LEED-EBOM) and new construction (LEED-NC) based on a building's compliance with the following criteria: Sustainable sites, water efficiency, energy and atmosphere, materials and resources, indoor environmental quality, and innovation in design.[38] In 2013, USGBC developed the LEED Dynamic Plaque, a tool to track building performance against LEED metrics and a potential path to recertification. The following year, the council collaborated with Honeywell to pull data on energy and water use, as well as indoor air quality from a BAS to automatically update the plaque, providing a near-real-time view of performance. The USGBC office in Washington, D.C. is one of the first buildings to feature the live-updating LEED Dynamic Plaque.[39]

A deep energy retrofit is a whole-building analysis and construction process that uses to achieve much larger energy savings than conventional energy retrofits. Deep energy retrofits can be applied to both residential and non-residential (“commercial”) buildings. A deep energy retrofit typically results in energy savings of 30 percent or more, perhaps spread over several years, and may significantly improve the building value.[40] The Empire State Building has undergone a deep energy retrofit process that was completed in 2013. The project team, consisting of representatives from Johnson Controls, Rocky Mountain Institute, Clinton Climate Initiative, and Jones Lang LaSalle will have achieved an annual energy use reduction of 38% and $4.4 million.[41] For example, the 6,500 windows were remanufactured onsite into superwindows which block heat but pass light. Air conditioning operating costs on hot days were reduced and this saved $17 million of the project's capital cost immediately, partly funding other retrofitting.[42] Receiving a gold Leadership in Energy and Environmental Design (LEED) rating in September 2011, the Empire State Building is the tallest LEED certified building in the United States.[30] The Indianapolis City-County Building recently underwent a deep energy retrofit process, which has achieved an annual energy reduction of 46% and $750,000 annual energy saving.

Energy retrofits, including deep, and other types undertaken in residential, commercial or industrial locations are generally supported through various forms of financing or incentives. Incentives include pre-packaged rebates where the buyer/user may not even be aware that the item being used has been rebated or "bought down". "Upstream" or "Midstream" buy downs are common for efficient lighting products. Other rebates are more explicit and transparent to the end user through the use of formal applications. In addition to rebates, which may be offered through government or utility programs, governments sometimes offer tax incentives for energy efficiency projects. Some entities offer rebate and payment guidance and facilitation services that enable energy end use customers tap into rebate and incentive programs.

To evaluate the economic soundness of energy efficiency investments in buildings, cost-effectiveness analysis or CEA can be used. A CEA calculation will produce the value of energy saved, sometimes called negawatts, in $/kWh. The energy in such a calculation is virtual in the sense that it was never consumed but rather saved due to some energy efficiency investment being made. Thus CEA allows comparing the price of negawatts with price of energy such as electricity from the grid or the cheapest renewable alternative. The benefit of the CEA approach in energy systems is that it avoids the need to guess future energy prices for the purposes of the calculation, thus removing the major source of uncertainty in the appraisal of energy efficiency investments.[43]

Industry

Industries use a large amount of energy to power a diverse range of manufacturing and resource extraction processes. Many industrial processes require large amounts of heat and mechanical power, most of which is delivered as natural gas, petroleum fuels, and electricity. In addition some industries generate fuel from waste products that can be used to provide additional energy.

Because industrial processes are so diverse it is impossible to describe the multitude of possible opportunities for energy efficiency in industry. Many depend on the specific technologies and processes in use at each industrial facility. There are, however, a number of processes and energy services that are widely used in many industries.

Various industries generate steam and electricity for subsequent use within their facilities. When electricity is generated, the heat that is produced as a by-product can be captured and used for process steam, heating or other industrial purposes. Conventional electricity generation is about 30% efficient, whereas combined heat and power (also called co-generation) converts up to 90 percent of the fuel into usable energy.[44]

Advanced boilers and furnaces can operate at higher temperatures while burning less fuel. These technologies are more efficient and produce fewer pollutants.[44]

Over 45 percent of the fuel used by US manufacturers is burnt to make steam. The typical industrial facility can reduce this energy usage 20 percent (according to the US Department of Energy) by insulating steam and condensate return lines, stopping steam leakage, and maintaining steam traps.[44]

Electric motors usually run at a constant speed, but a variable speed drive allows the motor's energy output to match the required load. This achieves energy savings ranging from 3 to 60 percent, depending on how the motor is used. Motor coils made of superconducting materials can also reduce energy losses.[44] Motors may also benefit from voltage optimisation.[45][46]

Industry uses a large number of pumps and compressors of all shapes and sizes and in a wide variety of applications. The efficiency of pumps and compressors depends on many factors but often improvements can be made by implementing better process control and better maintenance practices. Compressors are commonly used to provide compressed air which is used for sand blasting, painting, and other power tools. According to the US Department of Energy, optimizing compressed air systems by installing variable speed drives, along with preventive maintenance to detect and fix air leaks, can improve energy efficiency 20 to 50 percent.[44]

Transportation

Comparison to show which form of transport has the smallest carbon footprint, an indicator that is related to efficient energy use.[47]

Automobiles

The estimated energy efficiency for an automobile is 280 Passenger-Mile/106 Btu.[48] There are several ways to enhance a vehicle's energy efficiency. Using improved aerodynamics to minimize drag can increase vehicle fuel efficiency. Reducing vehicle weight can also improve fuel economy, which is why composite materials are widely used in car bodies.

More advanced tires, with decreased tire to road friction and rolling resistance, can save gasoline. Fuel economy can be improved by up to 3.3% by keeping tires inflated to the correct pressure.[49] Replacing a clogged air filter can improve a cars fuel consumption by as much as 10 percent on older vehicles.[50] On newer vehicles (1980s and up) with fuel-injected, computer-controlled engines, a clogged air filter has no effect on mpg but replacing it may improve acceleration by 6-11 percent.[51] Aerodynamics also aid in efficiency of a vehicle. The design of a car impacts the amount of gas needed to move it through air. Aerodynamics involves the air around the car, which can affect the efficiency of the energy expended.[52]

Turbochargers can increase fuel efficiency by allowing a smaller displacement engine. The 'Engine of the year 2011' is the Fiat TwinAir engine equipped with an MHI turbocharger. "Compared with a 1.2-liter 8v engine, the new 85 HP turbo has 23% more power and a 30% better performance index. The performance of the two-cylinder is not only equivalent to a 1.4-liter 16v engine, but fuel consumption is 30% lower."[53]

Energy-efficient vehicles may reach twice the fuel efficiency of the average automobile. Cutting-edge designs, such as the diesel Mercedes-Benz Bionic concept vehicle have achieved a fuel efficiency as high as 84 miles per US gallon (2.8 L/100 km; 101 mpg‑imp), four times the current conventional automotive average.[54]

The mainstream trend in automotive efficiency is the rise of electric vehicles (all-electric or hybrid electric). Electric engines have more than double the efficiency of internal combustion engines. Hybrids, like the Toyota Prius, use regenerative braking to recapture energy that would dissipate in normal cars; the effect is especially pronounced in city driving.[55] Plug-in hybrids also have increased battery capacity, which makes it possible to drive for limited distances without burning any gasoline; in this case, energy efficiency is dictated by whatever process (such as coal-burning, hydroelectric, or renewable source) created the power. Plug-ins can typically drive for around 40 miles (64 km) purely on electricity without recharging; if the battery runs low, a gas engine kicks in allowing for extended range. Finally, all-electric cars are also growing in popularity; the Tesla Model S sedan is the only high-performance all-electric car currently on the market.

Street lighting

Cities around the globe light up millions of streets with 300 million lights.[56] Some cities are seeking to reduce street light power consumption by dimming lights during off-peak hours or switching to LED lamps.[57] LED lamps are known to reduce the energy consumption by 50% to 80%.[58][59]

Aircraft

There are several ways to improve aviation's use of energy through modifications aircraft and air traffic management. Aircraft improve with better aerodynamics, engines and weight. Seat density and cargo load factors contribute to efficiency.

Air traffic management systems can allow automation of takeoff, landing, and collision avoidance, as well as within airports, from simple things like HVAC and lighting to more complex tasks such as security and scanning.

International Action

International agreements and pledges

At the 2023 United Nations Climate Change Conference, one of the adopted declaration was the GLOBAL RENEWABLES AND ENERGY EFFICIENCY PLEDGE signed by 123 countries. The declaration includes obligations to consider energy efficiency as "first fuel" and double the rate of increase in energy efficiency from 2% per year to 4% per year by the year 2030.[60] China and India did not signed this pledge.[61]

International standards

International standards ISO 17743 and ISO 17742 provide a documented methodology for calculating and reporting on energy savings and energy efficiency for countries and cities.[62][63]

Examples by country or region

Europe

The first EU-wide energy efficiency target was set in 1998. Member states agreed to improve energy efficiency by 1 percent a year over twelve years. In addition, legislation about products, industry, transport and buildings has contributed to a general energy efficiency framework. More effort is needed to address heating and cooling: there is more heat wasted during electricity production in Europe than is required to heat all buildings in the continent.[64] All in all, EU energy efficiency legislation is estimated to deliver savings worth the equivalent of up to 326 million tons of oil per year by 2020.[65]

The EU set itself a 20% energy savings target by 2020 compared to 1990 levels, but member states decide individually how energy savings will be achieved. At an EU summit in October 2014, EU countries agreed on a new energy efficiency target of 27% or greater by 2030. One mechanism used to achieve the target of 27% is the 'Suppliers Obligations & White Certificates'.[66] The ongoing debate around the 2016 Clean Energy Package also puts an emphasis on energy efficiency, but the goal will probably remain around 30% greater efficiency compared to 1990 levels.[65] Some have argued that this will not be enough for the EU to meet its Paris Agreement goals of reducing greenhouse gas emissions by 40% compared to 1990 levels.

In the European Union, 78% of enterprises proposed energy-saving methods in 2023, 67% listed energy contract renegotiation as a strategy, and 62% stated passing on costs to consumers as a plan to deal with energy market trends.[67][68][69]

Germany

Energy efficiency is central to energy policy in Germany.[70] As of late 2015, national policy includes the following efficiency and consumption targets (with actual values for 2014):[71]: 4 

Efficiency and consumption target201420202050
Primary energy consumption (base year 2008) −8.7%−20%−50%
Final energy productivity (2008–2050) 1.6%/year
(2008–2014)		2.1%/year
(2008–2050)
Gross electricity consumption (base year 2008) −4.6%−10%−25%
Primary energy consumption in buildings (base year 2008) −14.8%−80%
Heat consumption in buildings (base year 2008) −12.4%−20%
Final energy consumption in transport (base year 2005) 1.7%−10%−40%

Recent progress toward improved efficiency has been steady aside from the financial crisis of 2007–08.[72] Some however believe energy efficiency is still under-recognised in terms of its contribution to Germany's energy transformation (or Energiewende).[73]

Efforts to reduce final energy consumption in transport sector have not been successful, with a growth of 1.7% between 2005 and 2014. This growth is due to both road passenger and road freight transport. Both sectors increased their overall distance travelled to record the highest figures ever for Germany. Rebound effects played a significant role, both between improved vehicle efficiency and the distance travelled, and between improved vehicle efficiency and an increase in vehicle weights and engine power.[74]: 12 

In 2014, the German federal government released its National Action Plan on Energy Efficiency (NAPE).[75][76] The areas covered are the energy efficiency of buildings, energy conservation for companies, consumer energy efficiency, and transport energy efficiency. The central short-term measures of NAPE include the introduction of competitive tendering for energy efficiency, the raising of funding for building renovation, the introduction of tax incentives for efficiency measures in the building sector, and the setting up energy efficiency networks together with business and industry.

In 2016, the German government released a green paper on energy efficiency for public consultation (in German).[77][78] It outlines the potential challenges and actions needed to reduce energy consumption in Germany over the coming decades. At the document's launch, economics and energy minister Sigmar Gabriel said "we do not need to produce, store, transmit and pay for the energy that we save".[77] The green paper prioritizes the efficient use of energy as the "first" response and also outlines opportunities for sector coupling, including using renewable power for heating and transport.[77] Other proposals include a flexible energy tax which rises as petrol prices fall, thereby incentivizing fuel conservation despite low oil prices.[79]

Spain

In Spain, four out of every five buildings use more energy than they should. They are either inadequately insulated or consume energy inefficiently.[80][81][82]

The Unión de Créditos Immobiliarios (UCI), which has operations in Spain and Portugal, is increasing loans to homeowners and building management groups for energy-efficiency initiatives. Their Residential Energy Rehabilitation initiative aims to remodel and encourage the use of renewable energy in at least 3720 homes in Madrid, Barcelona, Valencia, and Seville. The works are expected to mobilize around €46.5 million in energy efficiency upgrades by 2025 and save approximately 8.1 GWh of energy. It has the ability to reduce carbon emissions by 7,545 tonnes per year.[83][84][82]

Poland

In May 2016 Poland adopted a new Act on Energy Efficiency, to enter into force on 1 October 2016.[85]

Australia

In July 2009, the Council of Australian Governments, which represents the individual states and territories of Australia, agreed to a National Strategy on Energy Efficiency (NSEE).[86] This is a ten-year plan accelerating the implementation of a nationwide adoption of energy-efficient practices and a preparation for the country's transformation into a low carbon future. The overriding agreement that governs this strategy is the National Partnership Agreement on Energy Efficiency.[87]

Canada

In August 2017, the Government of Canada released Build Smart - Canada's Buildings Strategy, as a key driver of the Pan-Canadian Framework on Clean Growth and Climate Change, Canada's national climate strategy.[88]

United States

A 2011 Energy Modeling Forum study covering the United States examined how energy efficiency opportunities will shape future fuel and electricity demand over the next several decades. The US economy is already set to lower its energy and carbon intensity, but explicit policies will be necessary to meet climate goals. These policies include: a carbon tax, mandated standards for more efficient appliances, buildings and vehicles, and subsidies or reductions in the upfront costs of new more energy-efficient equipment.[89]

Programs and organisations:

See also

International programs:

References

  1. ↑ Diesendorf, Mark (2007). Greenhouse Solutions with Sustainable Energy, UNSW Press, p. 86.
  2. ↑ "The value of urgent action on energy efficiency – Analysis". IEA. Retrieved 2022-11-23.
  3. ↑ Indra Overland (2010). "Subsidies for Fossil Fuels and Climate Change: A Comparative Perspective". International Journal of Environmental Studies. 67 (3): 203–217. Bibcode:2010IJEnS..67..303O. doi:10.1080/00207233.2010.492143. S2CID 98618399. Archived from the original on 2018-02-12. Retrieved 2018-05-16.
  4. ↑ Prindle, Bill; Eldridge, Maggie; Eckhardt, Mike; Frederick, Alyssa (May 2007). The twin pillars of sustainable energy: synergies between energy efficiency and renewable energy technology and policy. Washington, DC, US: American Council for an Energy-Efficient Economy. CiteSeerX 10.1.1.545.4606.
  5. 1 2 3 International Energy Agency: Report on Multiple Benefits of Energy Efficiency Archived 2021-03-29 at the Wayback Machine. OECD, Paris, 2014.
  6. ↑ Weinsziehr, T.; Skumatz, L. Evidence for Multiple Benefits or NEBs: Review on Progress and Gaps from the IEA Data and Measurement Subcommittee. In Proceedings of the International Energy Policy & Programme Evaluation Conference, Amsterdam, the Netherlands, 7–9 June 2016.
  7. ↑ Ürge-Vorsatz, D.; Novikova, A.; Sharmina, M. Counting good: Quantifying the co-benefits of improved efficiency in buildings. In Proceedings of the ECEEE 2009 Summer Study, Stockholm, Sweden, 1–6 June 2009.
  8. ↑ B Baatz, J Barrett, B Stickles: Estimating the Value of Energy Efficiency to Reduce Wholesale Energy Price Volatility Archived 2020-03-02 at the Wayback Machine. ACEEE, Washington D.C., 2018.
  9. ↑ Tuominen, P., Seppänen, T. (2017): Estimating the Value of Price Risk Reduction in Energy Efficiency Investments in Buildings Archived 2018-06-03 at the Wayback Machine. Energies. Vol. 10, p. 1545.
  10. ↑ Zehner, Ozzie (2012). Green Illusions. London: UNP. pp. 180–181. Archived from the original on 2020-04-04. Retrieved 2021-11-23.
  11. ↑ "Loading Order White Paper" (PDF). Archived (PDF) from the original on 2018-01-28. Retrieved 2010-07-16.
  12. ↑ Kennan, Hallie. "Working Paper: State Green Banks for Clean Energy" (PDF). Energyinnovation.org. Archived (PDF) from the original on 25 January 2017. Retrieved 26 March 2019.
  13. ↑ Dietz, T. et al. (2009).Household actions can provide a behavioral wedge to rapidly reduce US carbon emissions Archived 2020-09-19 at the Wayback Machine. PNAS. 106(44).
  14. ↑ "Europe 2030: Energy saving to become "first fuel"". EU Science Hub. European Commission. 2016-02-25. Archived from the original on 18 September 2021. Retrieved 2021-09-18.
  15. ↑ Motherway, Brian (19 December 2019). "Energy efficiency is the first fuel, and demand for it needs to grow". IEA. Archived from the original on 18 September 2021. Retrieved 2021-09-18.
  16. ↑ "Energy Efficiency 2018: Analysis and outlooks to 2040". IEA. October 2018. Archived from the original on 29 September 2020.
  17. ↑ Fernandez Pales, Araceli; Bouckaert, Stéphanie; Abergel, Thibaut; Goodson, Timothy (10 June 2021). "Net zero by 2050 hinges on a global push to increase energy efficiency". IEA. Archived from the original on 20 July 2021. Retrieved 2021-07-19.
  18. ↑ Huesemann, Michael H., and Joyce A. Huesemann (2011). Technofix: Why Technology Won't Save Us or the Environment Archived 2019-05-16 at the Wayback Machine, Chapter 5, "In Search of Solutions II: Efficiency Improvements", New Society Publishers, Gabriola Island, Canada.
  19. 1 2 The Rebound Effect: an assessment of the evidence for economy-wide energy savings from improved energy efficiency Archived 2008-09-10 at the Wayback Machine pp. v-vi.
  20. ↑ Greening, Lorna A.; David L. Greene; Carmen Difiglio (2000). "Energy efficiency and consumption—the rebound effect—a survey". Energy Policy. 28 (6–7): 389–401. doi:10.1016/S0301-4215(00)00021-5.
  21. ↑ Kenneth A. Small and Kurt Van Dender (September 21, 2005). "The Effect of Improved Fuel Economy on Vehicle Miles Traveled: Estimating the Rebound Effect Using US State Data, 1966-2001". University of California Energy Institute: Policy & Economics. Archived from the original on 2009-10-12. Retrieved 2007-11-23.
  22. ↑ "Energy Efficiency and the Rebound Effect: Does Increasing Efficiency Decrease Demand?" (PDF). Retrieved 2011-10-01.
  23. ↑ "Ecosavings". Electrolux.com. Archived from the original on 2011-08-06. Retrieved 2010-07-16.
  24. ↑ "Ecosavings (Tm) Calculator". Electrolux.com. Archived from the original on 2010-08-18. Retrieved 2010-07-16.
  25. ↑ "Pathways to a Low-Carbon Economy: Version 2 of the Global Greenhouse Gas Abatement Cost Curve". McKinsey Global Institute: 7. 2009. Archived from the original on February 6, 2020. Retrieved February 16, 2016.
  26. 1 2 3 4 Environmental and Energy Study Institute. "Energy-Efficient Buildings: Using whole building design to reduce energy consumption in homes and offices". EESI.org. Archived from the original on 2013-10-17. Retrieved 2010-07-16.
  27. ↑ Bank, European Investment (2022-01-27). EIB Activity Report 2021. European Investment Bank. ISBN 978-92-861-5108-8.
  28. ↑ "Making the new silicon". Main. Retrieved 2022-05-12.
  29. ↑ Comment, Peter Judge. "Cambridge GaN Devices promises better power conversion technology for servers". www.datacenterdynamics.com. Retrieved 2022-05-12.
  30. 1 2 "Empire State Building Achieves LEED Gold Certification | Inhabitat New York City". Inhabitat.com. Archived from the original on June 28, 2017. Retrieved October 12, 2011.
  31. ↑ Alison Gregor. "Declared the tallest building in the US — One World Trade Center is on track for LEED". United States Green Building Council. Archived from the original on July 28, 2019. Retrieved December 12, 2015.
  32. ↑ "ENERGY STAR Buildings and Plants". Energystar.gov. Archived from the original on 20 March 2020. Retrieved 26 March 2019.
  33. ↑ Juha Forsström, Pekka Lahti, Esa Pursiheimo, Miika Rämä, Jari Shemeikka, Kari Sipilä, Pekka Tuominen & Irmeli Wahlgren (2011): Measuring energy efficiency Archived 2020-02-13 at the Wayback Machine. VTT Technical Research Centre of Finland.
  34. ↑ Most heat is lost through the walls of your building, in fact about a third of all heat losses occur in this area. Simply Business Energy Archived 2016-06-04 at the Wayback Machine
  35. ↑ Creating Energy Efficient Offices - Electrical Contractor Fit-out Article
  36. ↑ Matar, W (2015). "Beyond the end-consumer: how would improvements in residential energy efficiency affect the power sector in Saudi Arabia?". Energy Efficiency. 9 (3): 771–790. doi:10.1007/s12053-015-9392-9.
  37. ↑ Yezioro, A; Dong, B; Leite, F (2008). "An applied artificial intelligence approach towards assessing building performance simulation tools". Energy and Buildings. 40 (4): 612. doi:10.1016/j.enbuild.2007.04.014.
  38. ↑ "LEED v4 for Building Design and Construction Checklist". USGBC. Archived from the original on 26 February 2015. Retrieved 29 April 2015.
  39. ↑ "Honeywell, USGBC Tool Monitors Building Sustainability". Environmental Leader. Archived from the original on 13 July 2015. Retrieved 29 April 2015.
  40. ↑ Fuerst, Franz; McAllister, Patrick. "New Evidence on the Green Building Rent and Price Premium" (PDF). University of Reading. Archived from the original (PDF) on 2012-06-11. Retrieved 2013-08-21.
  41. ↑ "Visit > Sustainability & Energy Efficiency | Empire State Building". Esbnyc.com. 2011-06-16. Archived from the original on 2014-05-17. Retrieved 2013-08-21.
  42. ↑ Amory Lovins (March–April 2012). "A Farewell to Fossil Fuels". Foreign Affairs. Archived from the original on 2012-07-07. Retrieved 2013-10-16.
  43. ↑ Tuominen, Pekka; Reda, Francesco; Dawoud, Waled; Elboshy, Bahaa; Elshafei, Ghada; Negm, Abdelazim (2015). "Economic Appraisal of Energy Efficiency in Buildings Using Cost-effectiveness Assessment". Procedia Economics and Finance. 21: 422–430. doi:10.1016/S2212-5671(15)00195-1.
  44. 1 2 3 4 5 Environmental and Energy Study Institute. "Industrial Energy Efficiency: Using new technologies to reduce energy use in industry and manufacturing" (PDF). Archived (PDF) from the original on 2015-01-11. Retrieved 2015-01-11.
  45. ↑ "Voltage Optimization Explained | Expert Electrical". www.expertelectrical.co.uk. 24 March 2017. Archived from the original on 2021-01-24. Retrieved 2020-11-26.
  46. ↑ "How To Save Money With Voltage Optimization". CAS Dataloggers. 2019-01-29. Retrieved 2020-11-26.
  47. ↑ "Which form of transport has the smallest carbon footprint?". Our World in Data. Retrieved 2023-07-07.}} Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License
  48. ↑ Richard C. Dorf, The Energy Factbook, McGraw-Hill, 1981
  49. ↑ "Tips to improve your Gas Mileage". Fueleconomy.gov. Archived from the original on 2013-11-07. Retrieved 2010-07-16.
  50. ↑ "Automotive Efficiency : Using technology to reduce energy use in passenger vehicles and light trucks" (PDF). Eesi.org. Archived (PDF) from the original on 4 March 2016. Retrieved 26 March 2019.
  51. ↑ "Effect of Intake Air Filter Condition on Vehicle Fuel Economy" (PDF). Fueleconomy.gov. Archived (PDF) from the original on 23 February 2020. Retrieved 26 March 2019.
  52. ↑ "What Makes a Fuel Efficient Car? The 8 Most Fuel Efficient Cars". CarsDirect. Archived from the original on 2018-10-03. Retrieved 2018-10-03.
  53. ↑ "Fiat 875cc TwinAir named International Engine of the Year 2011". Green Car Congress. Archived from the original on 2019-02-28. Retrieved 2016-02-04.
  54. ↑ "Energy Efficient Fact Sheet" (PDF). www.eesi.org. Archived from the original (PDF) on 6 July 2015. Retrieved 13 January 2022.
  55. ↑ Nom * (2013-06-28). "La Prius de Toyota, une référence des voitures hybrides | L'énergie en questions". Lenergieenquestions.fr. Archived from the original on 2013-10-17. Retrieved 2013-08-21.
  56. ↑ ltd, Research and Markets. "Global LED and Smart Street Lighting: Market Forecast (2017 - 2027)". Researchandmarkets.com. Archived from the original on 6 August 2019. Retrieved 26 March 2019.
  57. ↑ Edmonton, City of (26 March 2019). "Street Lighting". Edmonton.ca. Archived from the original on 27 March 2019. Retrieved 26 March 2019.
  58. ↑ "Guide for energy efficient street lighting installations" (PDF). Intelligent Energy Europe. Archived (PDF) from the original on 27 January 2020. Retrieved 27 January 2020.
  59. ↑ Sudarmono, Panggih; Deendarlianto; Widyaparaga, Adhika (2018). "Energy efficiency effect on the public street lighting by using LED light replacement and kwh-meter installation at DKI Jakarta Province, Indonesia". Journal of Physics: Conference Series. 1022 (1): 012021. Bibcode:2018JPhCS1022a2021S. doi:10.1088/1742-6596/1022/1/012021.
  60. ↑ "WE, HEADS OF STATE AND GOVERNMENTS AS THE PARTICIPANTS IN THE COP28 GLOBAL RENEWABLES AND ENERGY EFFICIENCY". COP 28. Retrieved 17 December 2023.
  61. ↑ J. Kurmayer, Nikolaus. "Global coalition pledges to triple renewables, double energy efficiency improvements". Euroactiv. Retrieved 17 December 2023.
  62. ↑ ISO 17743:2016 - Energy savings — Definition of a methodological framework applicable to calculation and reporting on energy savings. Geneva, Switzerland. Archived from the original on 2016-11-12. Retrieved 2016-11-11. {{cite book}}: |work= ignored (help)
  63. ↑ ISO 17742:2015 — Energy efficiency and savings calculation for countries, regions and cities. Geneva, Switzerland. Archived from the original on 2016-11-12. Retrieved 2016-11-11. {{cite book}}: |work= ignored (help)
  64. ↑ "Heat Roadmap Europe". Heatroadmap.eu. Archived from the original on 2020-03-10. Retrieved 2018-04-24.
  65. 1 2 "Energy Atlas 2018: Figures and Facts about Renewables in Europe | Heinrich Böll Foundation". Heinrich Böll Foundation. Archived from the original on 2019-02-28. Retrieved 2018-04-24.
  66. ↑ "Suppliers Obligations & White Certificates". Europa.EU. Archived from the original on 2017-02-05. Retrieved 2016-07-07.
  67. ↑ Bank, European Investment (2023-10-12). EIB Investment Survey 2023 - European Union overview. European Investment Bank. ISBN 978-92-861-5609-0.
  68. ↑ "Share of energy consumption from renewable sources in Europe - 8th EAP". www.eea.europa.eu. 2023-06-02. Retrieved 2023-10-23.
  69. ↑ "MEPs back plans for a more affordable and consumer-friendly electricity market | Vijesti | Europski parlament". www.europarl.europa.eu (in Croatian). 2023-07-19. Retrieved 2023-10-23.
  70. ↑ Federal Ministry of Economics and Technology (BMWi); Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) (28 September 2010). Energy concept for an environmentally sound, reliable and affordable energy supply (PDF). Berlin, Germany: Federal Ministry of Economics and Technology (BMWi). Archived from the original (PDF) on 6 October 2016. Retrieved 2016-05-01.
  71. ↑ The Energy of the Future: Fourth "Energy Transition" Monitoring Report — Summary (PDF). Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi). November 2015. Archived from the original (PDF) on 2016-09-20. Retrieved 2016-06-09.
  72. ↑ Schlomann, Barbara; Eichhammer, Wolfgang (2012). Energy efficiency policies and measures in Germany (PDF). Karlsruhe, Germany: Fraunhofer Institute for Systems and Innovation Research ISI. Archived (PDF) from the original on 2016-06-03. Retrieved 2016-05-01.
  73. ↑ Agora Energiewende (2014). Benefits of energy efficiency on the German power sector: summary of key findings from a study conducted by Prognos AG and IAEW (PDF). Berlin, Germany: Agora Energiewende. Archived from the original (PDF) on 2016-06-02. Retrieved 2016-04-29.
  74. ↑ Löschel, Andreas; Erdmann, Georg; Staiß, Frithjof; Ziesing, Hans-Joachim (November 2015). Statement on the Fourth Monitoring Report of the Federal Government for 2014 (PDF). Germany: Expert Commission on the "Energy of the Future" Monitoring Process. Archived from the original (PDF) on 2016-08-05. Retrieved 2016-06-09.
  75. ↑ "National Action Plan on Energy Efficiency (NAPE): making more out of energy". Federal Ministry for Economic Affairs and Energy (BMWi). Archived from the original on 2016-10-06. Retrieved 2016-06-07.
  76. ↑ Making more out of energy: National Action Plan on Energy Efficiency (PDF). Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi). December 2014. Archived (PDF) from the original on 2016-09-20. Retrieved 2016-06-07.
  77. 1 2 3 "Gabriel: Efficiency First — discuss the Green Paper on Energy Efficiency with us!" (Press release). Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi). 12 August 2016. Archived from the original on 22 September 2016. Retrieved 2016-09-06.
  78. ↑ Grünbuch Energieeffizienz: Diskussionspapier des Bundesministeriums für Wirtschaft und Energie [Green paper on energy efficiency: discussion document by the Federal Ministry for Economic Affairs and Energy] (PDF) (in German). Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi). Archived (PDF) from the original on 2016-09-10. Retrieved 2016-09-06.
  79. ↑ Amelang, Sören (15 August 2016). "Lagging efficiency to get top priority in Germany's Energiewende". Clean Energy Wire (CLEW). Berlin, Germany. Archived from the original on 2016-09-20. Retrieved 2016-09-06.
  80. ↑ Cater, Deborah (2021-06-09). "Four in five homes in Spain are not energy-efficient". InSpain.news. Retrieved 2023-01-27.
  81. ↑ "World Energy Efficiency Day: challenges in Spain". Interreg Europe. 7 March 2018. Retrieved 2023-01-27.
  82. 1 2 "Europe cuts emissions by improving energy efficiency". European Investment Bank. Retrieved 2023-01-27.
  83. ↑ "About Unión de Créditos Inmobiliarios | UCI Mortgages". ucimortgages.com. Retrieved 2023-01-27.
  84. ↑ "European Investment Bank - Spain: The EIB and the European Commission provide UCI with €2.6m to mobilize €46.5m for energy efficient housing". Electric Energy Online. Retrieved 2023-01-27.
  85. ↑ Sekuła-Baranska, Sandra (24 May 2016). "New Act on Energy Efficiency passed in Poland". Noerr. Munich, Germany. Archived from the original on 2020-12-09. Retrieved 2016-09-20.
  86. ↑ "National Strategy on Energy Efficiency", Industry.gov.au, 16 August 2015, archived from the original on 13 September 2015
  87. ↑ "National Partnership Agreement on Energy Efficiency" (PDF), Fif.gov.au, 16 August 2015, archived from the original (PDF) on 2015-03-12
  88. ↑ "Build Smart, Canada's Buildings Strategy, A Key Driver of the Pan-Canadian Framework on Clean Growth and Climate Change" (PDF). Energy and Mines Ministers’ Conference, St. Andrews by-the-Sea, New Brunswick. August 2017. Retrieved 18 July 2023.
  89. ↑ Huntington, Hillard (2011). EMF 25: Energy efficiency and climate change mitigation — Executive summary report (volume 1) (PDF). Stanford, California, US: Energy Modeling Forum. Archived (PDF) from the original on 2015-09-26. Retrieved 2016-05-10.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.