Examples

Example: Continuous (C⁰) But Not Differentiable

The C⁰ function f(x) = x for x ≥ 0 and 0 otherwise.

The function g(x) = x² sin(1/x) for x > 0.

The function ${\displaystyle f:\mathbb {R} \to \mathbb {R} }$ with ${\displaystyle f(x)=x^{2}\sin \left({\tfrac {1}{x}}\right)}$ for ${\displaystyle x\neq 0}$ and ${\displaystyle f(0)=0}$ is differentiable. However, this function is not continuously differentiable.

A smooth function that is not analytic.

The function

$${\displaystyle f(x)={\begin{cases}x&{\mbox{if }}x\geq 0,\\0&{\text{if }}x<0\end{cases}}}$$

is continuous, but not differentiable at x = 0, so it is of class C⁰, but not of class C¹.

Example: Finitely-times Differentiable (C^k)

For each even integer k, the function

$${\displaystyle f(x)=|x|^{k+1}}$$

is continuous and k times differentiable at all x. At x = 0, however, ${\displaystyle f}$ is not (k + 1) times differentiable, so ${\displaystyle f}$ is of class C^k, but not of class C^j where j > k.

Example: Differentiable But Not Continuously Differentiable (not C¹)

The function

$${\displaystyle g(x)={\begin{cases}x^{2}\sin {\left({\tfrac {1}{x}}\right)}&{\text{if }}x\neq 0,\\0&{\text{if }}x=0\end{cases}}}$$

is differentiable, with derivative

$${\displaystyle g'(x)={\begin{cases}-{\mathord {\cos \left({\tfrac {1}{x}}\right)}}+2x\sin \left({\tfrac {1}{x}}\right)&{\text{if }}x\neq 0,\\0&{\text{if }}x=0.\end{cases}}}$$

Because ${\displaystyle \cos(1/x)}$ oscillates as x → 0, ${\displaystyle g'(x)}$ is not continuous at zero. Therefore, ${\displaystyle g(x)}$ is differentiable but not of class C¹.

Example: Differentiable But Not Lipschitz Continuous

The function

$${\displaystyle h(x)={\begin{cases}x^{4/3}\sin {\left({\tfrac {1}{x}}\right)}&{\text{if }}x\neq 0,\\0&{\text{if }}x=0\end{cases}}}$$

is differentiable but its derivative is unbounded on a compact set. Therefore, ${\displaystyle h}$ is an example of a function that is differentiable but not locally Lipschitz continuous.

Example: Smooth (C^∞) but not Analytic (C^ω)

The bump function

$${\displaystyle f(x)={\begin{cases}e^{-{\frac {1}{1-x^{2}}}}&{\text{ if }}|x|<1,\\0&{\text{ otherwise }}\end{cases}}}$$

is smooth, so of class C^∞, but it is not analytic at x = ±1, and hence is not of class C^ω. The function f is an example of a smooth function with compact support.

Multivariate differentiability classes

A function ${\displaystyle f:U\subset \mathbb {R} ^{n}\to \mathbb {R} }$ defined on an open set ${\displaystyle U}$ of ${\displaystyle \mathbb {R} ^{n}}$ is said^[5] to be of class ${\displaystyle C^{k}}$ on ${\displaystyle U}$, for a positive integer ${\displaystyle k}$, if all partial derivatives

$${\displaystyle {\frac {\partial ^{\alpha }f}{\partial x_{1}^{\alpha _{1}}\,\partial x_{2}^{\alpha _{2}}\,\cdots \,\partial x_{n}^{\alpha _{n}}}}(y_{1},y_{2},\ldots ,y_{n})}$$

exist and are continuous, for every ${\displaystyle \alpha _{1},\alpha _{2},\ldots ,\alpha _{n}}$ non-negative integers, such that ${\displaystyle \alpha =\alpha _{1}+\alpha _{2}+\cdots +\alpha _{n}\leq k}$, and every ${\displaystyle (y_{1},y_{2},\ldots ,y_{n})\in U}$. Equivalently, ${\displaystyle f}$ is of class ${\displaystyle C^{k}}$ on ${\displaystyle U}$ if the ${\displaystyle k}$-th order Fréchet derivative of ${\displaystyle f}$ exists and is continuous at every point of ${\displaystyle U}$. The function ${\displaystyle f}$ is said to be of class ${\displaystyle C}$ or ${\displaystyle C^{0}}$ if it is continuous on ${\displaystyle U}$. Functions of class ${\displaystyle C^{1}}$ are also said to be continuously differentiable.

A function ${\displaystyle f:U\subset \mathbb {R} ^{n}\to \mathbb {R} ^{m}}$, defined on an open set ${\displaystyle U}$ of ${\displaystyle \mathbb {R} ^{n}}$, is said to be of class ${\displaystyle C^{k}}$ on ${\displaystyle U}$, for a positive integer ${\displaystyle k}$, if all of its components

$${\displaystyle f_{i}(x_{1},x_{2},\ldots ,x_{n})=(\pi _{i}\circ f)(x_{1},x_{2},\ldots ,x_{n})=\pi _{i}(f(x_{1},x_{2},\ldots ,x_{n})){\text{ for }}i=1,2,3,\ldots ,m}$$

are of class ${\displaystyle C^{k}}$, where ${\displaystyle \pi _{i}}$ are the natural projections ${\displaystyle \pi _{i}:\mathbb {R} ^{m}\to \mathbb {R} }$ defined by ${\displaystyle \pi _{i}(x_{1},x_{2},\ldots ,x_{m})=x_{i}}$. It is said to be of class ${\displaystyle C}$ or ${\displaystyle C^{0}}$ if it is continuous, or equivalently, if all components ${\displaystyle f_{i}}$ are continuous, on ${\displaystyle U}$.

The space of C^k functions

Let ${\displaystyle D}$ be an open subset of the real line. The set of all ${\displaystyle C^{k}}$ real-valued functions defined on ${\displaystyle D}$ is a Fréchet vector space, with the countable family of seminorms

$${\displaystyle p_{K,m}=\sup _{x\in K}\left|f^{(m)}(x)\right|}$$

where ${\displaystyle K}$ varies over an increasing sequence of compact sets whose union is ${\displaystyle D}$, and ${\displaystyle m=0,1,\dots ,k}$.

The set of ${\displaystyle C^{\infty }}$ functions over ${\displaystyle D}$ also forms a Fréchet space. One uses the same seminorms as above, except that ${\displaystyle m}$ is allowed to range over all non-negative integer values.

The above spaces occur naturally in applications where functions having derivatives of certain orders are necessary; however, particularly in the study of partial differential equations, it can sometimes be more fruitful to work instead with the Sobolev spaces.

Parametric continuity

Parametric continuity (C^k) is a concept applied to parametric curves, which describes the smoothness of the parameter's value with distance along the curve. A (parametric) curve ${\displaystyle s:[0,1]\to \mathbb {R} ^{n}}$ is said to be of class C^k, if ${\displaystyle \textstyle {\frac {d^{k}s}{dt^{k}}}}$ exists and is continuous on ${\displaystyle [0,1]}$, where derivatives at the end-points ${\displaystyle 0}$ and ${\displaystyle 1}$ are taken to be one sided derivatives (from the right at ${\displaystyle 0}$ and from the left at ${\displaystyle 1}$).

As a practical application of this concept, a curve describing the motion of an object with a parameter of time must have C¹ continuity and its first derivative is differentiable—for the object to have finite acceleration. For smoother motion, such as that of a camera's path while making a film, higher orders of parametric continuity are required.

Order of parametric continuity

Two Bézier curve segments attached that is only C⁰ continuous

Two Bézier curve segments attached in such a way that they are C¹ continuous

The various order of parametric continuity can be described as follows:^[9]

• ${\displaystyle C^{0}}$: zeroth derivative is continuous (curves are continuous)
• ${\displaystyle C^{1}}$: zeroth and first derivatives are continuous
• ${\displaystyle C^{2}}$: zeroth, first and second derivatives are continuous
• ${\displaystyle C^{n}}$: 0-th through ${\displaystyle n}$-th derivatives are continuous

Geometric continuity

Curves with G¹-contact (circles,line)

${\displaystyle (1-\varepsilon ^{2})x^{2}-2px+y^{2}=0,\ p>0\ ,\varepsilon \geq 0}$
pencil of conic sections with G²-contact: p fix, ${\displaystyle \varepsilon }$ variable
(${\displaystyle \varepsilon =0}$: circle,${\displaystyle \varepsilon =0.8}$: ellipse, ${\displaystyle \varepsilon =1}$: parabola, ${\displaystyle \varepsilon =1.2}$: hyperbola)

The concept of geometrical continuity or geometric continuity (Gⁿ) was primarily applied to the conic sections (and related shapes) by mathematicians such as Leibniz, Kepler, and Poncelet. The concept was an early attempt at describing, through geometry rather than algebra, the concept of continuity as expressed through a parametric function.^[10]

The basic idea behind geometric continuity was that the five conic sections were really five different versions of the same shape. An ellipse tends to a circle as the eccentricity approaches zero, or to a parabola as it approaches one; and a hyperbola tends to a parabola as the eccentricity drops toward one; it can also tend to intersecting lines. Thus, there was continuity between the conic sections. These ideas led to other concepts of continuity. For instance, if a circle and a straight line were two expressions of the same shape, perhaps a line could be thought of as a circle of infinite radius. For such to be the case, one would have to make the line closed by allowing the point ${\displaystyle x=\infty }$ to be a point on the circle, and for ${\displaystyle x=+\infty }$ and ${\displaystyle x=-\infty }$ to be identical. Such ideas were useful in crafting the modern, algebraically defined, idea of the continuity of a function and of ${\displaystyle \infty }$ (see projectively extended real line for more).^[10]

Relation to analyticity

While all analytic functions are "smooth" (i.e. have all derivatives continuous) on the set on which they are analytic, examples such as bump functions (mentioned above) show that the converse is not true for functions on the reals: there exist smooth real functions that are not analytic. Simple examples of functions that are smooth but not analytic at any point can be made by means of Fourier series; another example is the Fabius function. Although it might seem that such functions are the exception rather than the rule, it turns out that the analytic functions are scattered very thinly among the smooth ones; more rigorously, the analytic functions form a meagre subset of the smooth functions. Furthermore, for every open subset A of the real line, there exist smooth functions that are analytic on A and nowhere else .

It is useful to compare the situation to that of the ubiquity of transcendental numbers on the real line. Both on the real line and the set of smooth functions, the examples we come up with at first thought (algebraic/rational numbers and analytic functions) are far better behaved than the majority of cases: the transcendental numbers and nowhere analytic functions have full measure (their complements are meagre).

The situation thus described is in marked contrast to complex differentiable functions. If a complex function is differentiable just once on an open set, it is both infinitely differentiable and analytic on that set .

Smooth partitions of unity

Smooth functions with given closed support are used in the construction of smooth partitions of unity (see partition of unity and topology glossary); these are essential in the study of smooth manifolds, for example to show that Riemannian metrics can be defined globally starting from their local existence. A simple case is that of a bump function on the real line, that is, a smooth function f that takes the value 0 outside an interval [a,b] and such that

$${\displaystyle f(x)>0\quad {\text{ for }}\quad a<x<b.\,}$$

Given a number of overlapping intervals on the line, bump functions can be constructed on each of them, and on semi-infinite intervals ${\displaystyle (-\infty ,c]}$ and ${\displaystyle [d,+\infty )}$ to cover the whole line, such that the sum of the functions is always 1.

From what has just been said, partitions of unity do not apply to holomorphic functions; their different behavior relative to existence and analytic continuation is one of the roots of sheaf theory. In contrast, sheaves of smooth functions tend not to carry much topological information.

Smooth functions on and between manifolds

Given a smooth manifold ${\displaystyle M}$, of dimension ${\displaystyle m,}$ and an atlas ${\displaystyle {\mathfrak {U}}=\{(U_{\alpha },\phi _{\alpha })\}_{\alpha },}$ then a map ${\displaystyle f:M\to \mathbb {R} }$ is smooth on ${\displaystyle M}$ if for all ${\displaystyle p\in M}$ there exists a chart ${\displaystyle (U,\phi )\in {\mathfrak {U}},}$ such that ${\displaystyle p\in U,}$ and ${\displaystyle f\circ \phi ^{-1}:\phi (U)\to \mathbb {R} }$ is a smooth function from a neighborhood of ${\displaystyle \phi (p)}$ in ${\displaystyle \mathbb {R} ^{m}}$ to ${\displaystyle \mathbb {R} }$ (all partial derivatives up to a given order are continuous). Smoothness can be checked with respect to any chart of the atlas that contains ${\displaystyle p,}$ since the smoothness requirements on the transition functions between charts ensure that if ${\displaystyle f}$ is smooth near ${\displaystyle p}$ in one chart it will be smooth near ${\displaystyle p}$ in any other chart.

If ${\displaystyle F:M\to N}$ is a map from ${\displaystyle M}$ to an ${\displaystyle n}$-dimensional manifold ${\displaystyle N}$, then ${\displaystyle F}$ is smooth if, for every ${\displaystyle p\in M,}$ there is a chart ${\displaystyle (U,\phi )}$ containing ${\displaystyle p,}$ and a chart ${\displaystyle (V,\psi )}$ containing ${\displaystyle F(p)}$ such that ${\displaystyle F(U)\subset V,}$ and ${\displaystyle \psi \circ F\circ \phi ^{-1}:\phi (U)\to \psi (V)}$ is a smooth function from ${\displaystyle \mathbb {R} ^{n}.}$

Smooth maps between manifolds induce linear maps between tangent spaces: for ${\displaystyle F:M\to N}$, at each point the pushforward (or differential) maps tangent vectors at ${\displaystyle p}$ to tangent vectors at ${\displaystyle F(p)}$: ${\displaystyle F_{*,p}:T_{p}M\to T_{F(p)}N,}$ and on the level of the tangent bundle, the pushforward is a vector bundle homomorphism: ${\displaystyle F_{*}:TM\to TN.}$ The dual to the pushforward is the pullback, which "pulls" covectors on ${\displaystyle N}$ back to covectors on ${\displaystyle M,}$ and ${\displaystyle k}$-forms to ${\displaystyle k}$-forms: ${\displaystyle F^{*}:\Omega ^{k}(N)\to \Omega ^{k}(M).}$ In this way smooth functions between manifolds can transport local data, like vector fields and differential forms, from one manifold to another, or down to Euclidean space where computations like integration are well understood.

Preimages and pushforwards along smooth functions are, in general, not manifolds without additional assumptions. Preimages of regular points (that is, if the differential does not vanish on the preimage) are manifolds; this is the preimage theorem. Similarly, pushforwards along embeddings are manifolds.^[13]

Smooth functions between subsets of manifolds

There is a corresponding notion of smooth map for arbitrary subsets of manifolds. If ${\displaystyle f:X\to Y}$ is a function whose domain and range are subsets of manifolds ${\displaystyle X\subseteq M}$ and ${\displaystyle Y\subseteq N}$ respectively. ${\displaystyle f}$ is said to be smooth if for all ${\displaystyle x\in X}$ there is an open set ${\displaystyle U\subseteq M}$ with ${\displaystyle x\in U}$ and a smooth function ${\displaystyle F:U\to N}$ such that ${\displaystyle F(p)=f(p)}$ for all ${\displaystyle p\in U\cap X.}$