DCL
Type Ceiling lamp connector
Production history
Designer IEC
Designed 2005 (2005)
Manufacturer Elko, Legrand, Schneider Electric, Lébénoïd, more
General specifications
Length 24.2 mm + length of pins
Width 30.2 mm
Audio signal None
Video signal None
Cable Electrical
Pins 3
Connector DCL
Electrical
Signal 6 ampere
Earth Yes
Max. voltage 250 V AC
Max. current 6 A
Data
Data signal None
Pinout
Pin 1 Load L
Pin 2 Protective earth PE
Pin 3 Neutral N
3 on the plug, 6 inside the socket.

Device for Connection of Luminaires (DCL) is a European standard for ceiling light fixtures introduced in 2005 and refined in 2009. It uses 6 ampere. DCL must carry the CE marking as per the Low Voltage Directive. DCL is only allowed to be installed with ground.

Example of DCL socket.
Socket internals
PinColorFunction
1Load (L)
2Load (L)
3Protective earth
4Protective earth
5Neutral (N)
6Neutral (N)

Adoption

Country Notes
 Austria
 Belgium
 Bulgaria
 Croatia
 Cyprus
 Czech Republic
 Denmark
 Estonia
 Finland
 France Mandatory in new and renovated homes since 2001. Norme Française NF C 15-100.
 Germany
 Greece
 Hungary
 Republic of Ireland
 Italy
 Latvia
 Lithuania
 Luxembourg
 Malta
 Netherlands
 Poland
 Portugal
 Romania
 Slovakia
 Slovenia
 Spain
 Sweden Mandatory since April 1, 2019
Non-EU countries
Country Notes
 Norway Mandatory since December 31, 2010
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.