Toaster Teardown

Written By: Shuman C
Published: 16/10/18
  • Comments: 1

Toaster Teardown

Published: 16/10/18

Teardown

Introduction

  1. TL23lhUXkQ2vPhlv

    • Remove Breville bread toaster base screws -- 14 places.

  2. EaJJKXt4eXcTLPrb
    EaJJKXt4eXcTLPrb
    lIKKbhluXN5mqreP

    • With a scissor cut the wires connecting the base and the shell.

  3. S2CfovA1ZHldbPXT
    S2CfovA1ZHldbPXT
    mv1mCwWfiv6VbcJs

    • Break up the inner shell of toaster and the wire sheet.

  4. O1QAPvAcfVNmfUri
    O1QAPvAcfVNmfUri
    bCDZCHrK1uqQZa4X

    • Remove all the parts of shell and base.

  5. VLEA1H5kdrTcexUQ

    • Shell

    • Base

    • Heater element -Nickel chrome wire

    • Switch assembly - ABS injection moulding

    • Circuit board

    • Wires

    • Screws

Author

Shuman C

Member since: 16/10/18

130 Reputation

One comment

Errors:
Step 1. There are 18 screws. The 4 corner screws hold in the feet. The feet must be removed to reveal 4 more screws under each rubber foot.

Step 2. The green earth wire is welded onto the cover, but can be unscrewed at the toaster end rather than cutting the wire.

MrMilf -