Introduction

  1. nyPXjWYouWeZjuKR
    • This is the iron we will take apart.

  2. Tc1UcZuFOdMbfHYZ
    • First remove the rear or the iron using the flathead screwdriver.

  3. WIdkIHPoriPQJFxG
    • Next remove the cable bridge bracket.

  4. OemBvBWFky5Nh1Sr
    • Next remove the screws from the base. (see arrows for location)

  5. BJr3bxqQeLwL4tyF
    • Next remove the screw the hold the top on.

  6. PORTEWwKOuIIGZfe
    • To free the long cable remove from terminal block at rear.

  7. eEMqMgwUqUEZK6XX
    • At the front of the iron pull out the buttons for the steam and water.

  8. kS1GD3kNx2QEDSCa
    • Next unclip the button holder (red circle) by undoing the screws (black circle)

  9. kA2Bt2xlViV6DulV
    • Next remove the bridge clip from the arrows position.

  10. C6BNTaDj5QVVRxuY
    • Next remove the inner button (black circle)

    • Now remove the centre screw (red arrow)

  11. ZSpUoZcpZ1n6VSsA
    • slide off the cable holder from the cable.

  12. lZNHFdybiHsYqanD
    • Disassemble the plug

    • First remove the casing.

    • Now remove the wires from the pins.

    • Next remove the pins.

  13. dh5bbTplEfHwWkfe
    • Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.

  14. WwN3i5wfPnBceUBl
    • Next take out round selector, this is simply clipped so can be pulled out with pliers.

  15. uB5AZ6PnscHVPrs6
    • Next remove the washer parts at the front of the iron.

    • Take the tubing off.

    من فضلكم كيفة افك الجزءالامامي من الحديد

    douahiahmed -

  16. q3V4Uq3B3VHOlHSl
    • Remove the seals for the water pump.

    • Now take pumps out.

  17. IKOmrMUQucqvsRHF
    • Remove the screw (circled) this will lead to the separation of the base and the top.

  18. MYThOwaB4ADMlHAD
    • Remove the top of the iron to reveal the under parts.

    • Now remove the rubber seals from the plate.

    • Take out the screws linking to the stainless steel base.

  19. RecGRTMKC36rGXYo
    • Remove the terminal block from the wires.

    • Next take off the black section of the iron.

  20. qMxwke2IhYpLIYFu
    • Now remove the screws from the steel base.

  21. ggKhZQGVwZaLQqPi
    • Next remove each individual part ( mostly wiring)

    i need THERMASTER wher shell i get

    KRISHNA NANA MOHITE -

  22. Q3datvdeasOHn6EZ
    • All parts at the end of the process.

RIchard fox

Member since: 17/03/10

269 Reputation

0 comments