Dell Quietkey SK-8000 Keyboard Teardown

Written By: Ion
Published: 07/03/18
  • Comments: 0

Dell Quietkey SK-8000 Keyboard Teardown

Published: 07/03/18

Teardown

Introduction

This is a complete teardown of the Dell Quietkey SK-8000 Keyboard.

  1. OSyRuXlxWuFaMHCS
    OSyRuXlxWuFaMHCS
    HFES3c1deslnUE5b

    • Flip the keyboard over to expose 8 screws.

    • Use a Phillips screwdriver to unscrew and remove each screw.

  2. PlajHFqYPVIoTAGG
    PlajHFqYPVIoTAGG
    jjKgdZheQKrDskB1

    • Lift the keyboard upward from the bottom.

    • Do not pull too hard when lifting the base. Be careful not to destroy the wires connecting to the base of the keyboard.

    • Use a Phillips screwdriver to remove the remaining ten screws on the aluminum plate.

  3. XDReDU2iHRocKdfv
    XDReDU2iHRocKdfv
    Rk5GJsbmnmfOpgbl
    ZbxxwZBkNsqIffHP

    • Carefully lift each part out. Each part should lift out very easily after the screws are removed.

  4. MqGD1NMEjkCARFAX

    • The keyboard controller is seen to be a Siltek R4462.

Author

Ion

Member since: 29/09/15

479 Reputation

0 comments