iHome iBT230 Screen Replacement

Written By: Bilal Siddiqui
  • Comments: 0
iHome iBT230 Screen Replacement

Difficulty

Moderate

Steps

5

Time Required

10 - 15 minutes

Introduction

This guide provides step-by-step instructions for replacing the screen of the iHome iBT230. The screen allows the user to clearly see the time display.

  1. 4rMMrjP1yHUD3r5L

    • Remove the four 5.5 mm Phillips Head #00 screws from the bottom of the iBT230.

  2. jXxhTQNpASiimjXi
    jXxhTQNpASiimjXi
    Ec3K5UBX2id2CHye

    • Grip the top of the iBT230 by placing your thumb on the back of the iBT230, where the USB port is located. Pull up, and you should notice different colored wires connected to the Main Motherboard.

  3. ZUp1WtwaQ2LU5FSI
    ZUp1WtwaQ2LU5FSI
    JL551Ox3F1WRF5hU

    • Unplug the connectors from all sides of the iBT230, and unplug the wire that is connected to the screen.

  4. qKOoHyjTJlHDXLx6

    • Unscrew the four 5.5 mm Phillips #00 face panel screws from the front screen.

  5. sHDbxVwgDLwbu2wi
    sHDbxVwgDLwbu2wi
    ZHIegDyUQuoOsQrV

    • Once the four 5.5 mm Phillips #00 face panel screws come out, slide the screen out vertically. Set the screen aside.

    • Disconnect the blue tipped ribbon, from the back of the screen.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Bilal Siddiqui

Member since: 10/04/17

376 Reputation

0 comments