iHome iBT230 Motherboard Replacement

Written By: Bilal Siddiqui
  • Comments: 0
iHome iBT230 Motherboard Replacement

Difficulty

Moderate

Steps

4

Time Required

5 - 10 minutes

Introduction

This guide provides step-by-step instructions for replacing the main motherboard of the iHome iBT230. The main motherboard is responsible for allowing communication between the crucial electronic components of the iBT230, such as the central processing unit (CPU) , memory, also providing the connectors for other peripherals.

  1. MZT2wdN4DxB1Nblb

    • Remove the four 5.5 mm Phillips Head #00 screws from the bottom palate of the iBT230.

  2. kUWdwMYHn5rFo5mt
    kUWdwMYHn5rFo5mt
    gO26Gd1CSQBeNQkI

    • Grip the top of the iBT230 by placing your thumb on the back portion, where the USB port is located. Pull up, and you should notice various different colored wires, connected to the Main Motherboard.

  3. 5USMjC4txqDf3mWy
    5USMjC4txqDf3mWy
    t2NtQK5JRUoTyN2J
    GpvNddLlThojP1DX

    • Unplug the connectors from all sides of the iBT230, and unplug the wire connected to the screen.

    • Make sure to note which wire goes where, you don't want to re-solder the wires into the incorrect ports!

  4. ISWdSRZsAkRKWqB1
    ISWdSRZsAkRKWqB1
    HUasI4Loyp26y3JE

    • On the bottom component where the green Main Motherboard is located, remove the two 5.5 mm Phillips #00 screws.

    • The old Motherboard will come free from the bottom of the iBT230.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Bilal Siddiqui

Member since: 10/04/17

376 Reputation

0 comments