iHip Fold-up Portable Speaker Back Cover Removal

Written By: Cristina Garcia
  • Comments: 0
iHip Fold-up Portable Speaker Back Cover Removal

Difficulty

Very easy

Steps

4

Time Required

5 - 10 minutes

Introduction

This guide will aid in properly removing the back cover of the device. Through doing this, you will have access to the internal pieces of the device and allow in further adjustments.

  1. EICJNBPBZatdYshh

    • Use your fingers to slide the battery case cover off in the direction of the arrows.

  2. PQxWhcLQTDfqShLX
    PQxWhcLQTDfqShLX
    XGh1y6wxoHdGnP5K
    XDDLuXHHCERTjppi

    • Remove the four AAA batteries. Be sure to check your nearest battery recycling point!

    • Use the detailing brush and a paper towel to remove any corrosion left by previous batteries.

  3. mBaDHeTwTxuJfibn
    mBaDHeTwTxuJfibn
    bGxTwQ5LRZ6DtGQ5

    • Unscrew the four outer 1.0 mm screws with a Phillips-Head screwdriver.

    • Screws will be magnetized in position and will require the use of tweezers to be removed.

    • Push down gently on the battery case cover and slide it in the direction the arrows indicate. Remove the batteries.

    • Unscrew the 0.6 mm screw located in the center of the battery case.

    • Keep the 1.0 mm and 0.6 mm screws separate from each other for reassembly.

  4. LOwY5cDdEeJWQhPv
    LOwY5cDdEeJWQhPv
    mVRedmsOKGr1fkWQ

    • Remove the back cover carefully; there are many wires that connect it to the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Cristina Garcia

Member since: 13/10/14

301 Reputation

0 comments