XtremeMac Luna Dissasembly

Written By: Daniel Johnson
  • Comments: 0
XtremeMac Luna Dissasembly

Difficulty

Very easy

Steps

3

Time Required

5 - 10 minutes

Introduction

This guide will show you how to open the XtremeMac Luna so that its inner components are easily accessible.

  1. uNZsIUOQHPTal5Nj
    uNZsIUOQHPTal5Nj
    qVtqLqoYd5eYLm2u
    cUSriy6dhYHVQFO1

    • Flip the device over so that the batteries are closest to you.

    • Remove the battery lid by pressing the battery cover's tab and pulling it away from the device.

    • Push the battery against the spring and lift it out of the casing.

    • Repeat with the other battery.

  2. WuHRNRGHY21enmuZ

    • Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.

    • The iFixit 26 bit screwdriver kit will not reach the screws. Make sure to use a screwdriver that is thin enough to not get stuck in the screw holes.

  3. KiRFJZ6qs4PPAuoI
    KiRFJZ6qs4PPAuoI
    FeTiALQfLAHCEqqo

    • Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you.

    • Gently tilt the lid back 45 degrees so that the inside is exposed.

    • Be mindful of the wires inside of the Luna. It is easy to break a connection if a wire gets caught.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Daniel Johnson

Member since: 15/04/13

1 Reputation

0 comments