Introduction

The headlights illuminate while the car is moving forward, and can be useful for seeing the road ahead. A disconnected wire or blown light will make the light not die and will need replacing.

  1. 1olWnWLQxDOTjxIX
    • Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.

    • Unclip the two clips to remove the battery cover.

  2. anojGdmPh3wKSNFw
    • Unplug the battery by pushing on the clip.

  3. P4EOKXAfKdl5IQPT
    P4EOKXAfKdl5IQPT
    IQKilnKQM3hRlJ2i
    • Unscrew the two 2.5 mm Phillips #00 screws from the underside of the car and remove the front underskirt.

  4. UOkOlUWr2opXymwe
    • Unscrew the four 2.5mm Phillips #00 screws from the front bumper and lift up the front bumper to remove.

  5. x4bCaSJY5ksELEvX
    • Remove the front bumper by sliding it away from the car.

  6. ixUPR2RigSCWJwNk
    • Remove the headlight cover.

  7. CRLWULFa5sIKbLck
    • Pull out the headlight.

    • Desolder and disconnect the headlight

Conclusion

To reassemble your device, follow these instructions in reverse order.

Liam Martinez

Member since: 02/04/15

562 Reputation

0 comments