Western Saddle Fender Replacement

Written By: Mackenzie Pagliai
  • Comments: 0
Western Saddle Fender Replacement

Difficulty

Easy

Steps

11

Time Required

20 minutes

Introduction

In this guide the reader will learn how to properly replace the fender on a western saddle. The repair will require a new saddle fender. It is easiest to perform this replacement while using a saddle stand, but it is not required.

  1. oxEhhOFeFmbkKuZm

    • Unbuckle the fender.

  2. rD2hXTprTGPLihEx

    • Remove the stirrup from the fender.

  3. OA3aDvdRAYwxQOai

    • Pull on the fender leather to remove the fender from the saddle.

  4. YfAbyNAg1CxgEKUu
    YfAbyNAg1CxgEKUu
    mZVl4NUkJ1fFe2IF

    • Remove the hobble and blevins from the new stirrup.

  5. NZpedGXVgotyw4KI
    NZpedGXVgotyw4KI
    bbkshTVpMJrKyZxN
    tQJCehcIFxRFHFTO

    • Run the new stirrup leather over the bar.

  6. ySbgVFZfa1TDpFKr
    ySbgVFZfa1TDpFKr
    RqoxoCbWm66HLUHn

    • Bring the fender leather out on the underside of the saddle.

  7. UD3TMCTv4V5FsgQK
    UD3TMCTv4V5FsgQK
    NEudQiIRs1bYHu51

    • Push the leather back under the bar over the rigging.

  8. PrDSdxTNqZtVTawA

    • Pull the stirrup leather tight.

  9. G6eLLJFqRVnpqAyi
    G6eLLJFqRVnpqAyi
    5YZvSXDUE6RmhEg2

    • Put stirrup, blevins, and hobble back on the new stirrup.

  10. qqKVYcNhYTA5h1ls
    qqKVYcNhYTA5h1ls
    JnAIRPvMNFXcmSPC

    • Slide the blevins over the stirrup holes.

  11. x6OYNJDIYdcK2WIX

    • After the fender is fixed the saddle should be ready to ride.

Conclusion

The fender is replaced and you are ready to ride!

Author

Mackenzie Pagliai

Member since: 30/09/16

185 Reputation

0 comments