Introduction

This guide is designed to provide you with simple steps to remove and replace the Verizon Ellipsis 10 Speaker. This replacement will resolve any sound quality issues.

  1. WGZWmDKKfaCElc2H
    • Open the SD/SIM card cover to start prying off the back cover.

    Can I rig up a tool this was gave to me

    Luckily SD card still in tac I let a friend use it for Netflix it was plugged in all nite while watching it could that be the reason it won't come on

    ribinstick48 -

  2. cUJdUUdCeyMtXgjW
    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

  3. KToPAvMyEg6DM1kJ
    • Follow along the edge of the device to undo all of the retaining clips.

  4. UqwUJ1cTFCZAhPHk
    • Once all the clips are undone, the back panel should come off with little effort.

  5. KQiJqCqcI1PRYyn1
    • Remove the bottom piece of tape securing the battery making sure you are not peeling up anything else in the process.

  6. xjNtI4yByBCAbghO
    • Remove the top piece of tape using an iFixit opening tool.

  7. qyKvR3BesARrUDYx
    • Once you have a hold on the tape, carefully remove it making sure you aren’t damaging the battery in the process.

  8. sJhWYFn4J6ACbZsR
    • Unplug the battery power connector by sliding the white plastic plug down away from the board.

  9. Vk6FJcR1jAMC2lbR
    • The battery should be free to come out of the device. Make sure not to bend or damage the battery.

  10. HFe266hWDVOF5VWP
    • Using a Phillips #00 screwdriver, remove the four M1.5 screws from the right speaker.

  11. qjskCp4E4Dyvou53
    • Remove the black and white wires connected to the motherboard by pulling up on their connections.

    • Remove the three strips of tape.

  12. PSPDH44bFKft21JP
    • Remove the four M1.5 screws on the left speaker.

    • Remove the speakers from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mary Duran

Member since: 03/04/19

597 Reputation

0 comments