Trumpet Stem Felt Replacement

Written By: Nathan
  • Comments: 0
Trumpet Stem Felt Replacement

Difficulty

Easy

Steps

6

Time Required

5 - 10 minutes

Introduction

Over time, regular use of the trumpet can lead to the degradation of the felt material. The stem felt can wear down from friction against the valve, deteriorate due to moisture from breath or saliva, or accumulate dirt or debris. Here is the process of replacing the stem felt in a trumpet's valve.

  1. 4pTUOngDEWJ1ufBV

    • Loosen and remove the top valve cap from the trumpet body.

  2. TJvYEToMLIAo263q

    • Pull the valve out of the trumpet body.

  3. cudTqCWfsbpVJZfJ
    cudTqCWfsbpVJZfJ
    SuKaSSyEYC2RNmKQ

    • Loosen and remove the finger button from the end of the stem.

  4. cx1dSqLMZaqfy3pp

    • Remove the top valve cap from the stem.

  5. UVaRWHNAR6kP3Lhe

    • Carefully pull the used stem felt off of the base of the stem and remove it from the stem.

  6. UDwnF6woTSHehBj5

    • Fit the new stem felt onto the stem and push it down onto the base.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nathan

Member since: 10/10/23

133 Reputation

0 comments