TomTom XXL 540 Back Panel Replacement

Written By: Mike Sollars
  • Comments: 0
TomTom XXL 540 Back Panel Replacement

Difficulty

Moderate

Steps

6

Time Required

30 minutes - 1 hour

Introduction

This guide shows how to replace the back panel on a TomTom XXL 540.

  1. BfxOnApTYB51LtUu
    BfxOnApTYB51LtUu
    fADbO6SqqyKrZIGw

    • Using tweezers, peel back the sticker on the bottom of the device to reveal the two T5 screws.

    • Use the T5 Torx screwdriver to unscrew the two T5 screws.

  2. EoZEeoAHGIEPZXCS

    • Use a flat edge screwdriver to pry open the faceplate.

  3. iiq2XsNcEUGOMvWf

    • Release the ribbon cable that connects the two sides.

  4. bDMR1fpjZxSg2V1m

    • Identify the green motherboard.

    • Use the T5 Torx screwdriver to unscrew the three T5 screws that hold the motherboard in place.

  5. cgBBuPotSbxBZon1

    • Remove and disconnect the motherboard and battery from the back panel.

  6. yTf1VNHRNAsILeeJ

    • Attach the motherboard and battery to the new back panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Mike Sollars

Member since: 12/07/13

519 Reputation

0 comments