Introduction

If it seems as though the top cover is broken, it may be necessary to replace it. This guide will outline all the necessary steps to carry this task out successfully. With all the required parts and tools in hand, this guide should take but minutes to complete.

  1. oTeWDkXQuTlNwNrY
    oTeWDkXQuTlNwNrY
    RCgTdlfMqpcVNAIQ
    qSgQCbhk1553Aq2D
    • Remove the plastic cover and pack of weights.

    • Remove the two 1.0 mm foam covers with tweezers.

    • Peel away the plastic screw cover with tweezers.

  2. nIB4WYurH14EYxwP
    nIB4WYurH14EYxwP
    4OsXIYwAM6G5fRQC
    • Remove the four 1.0 mm screws with a Ph #1 screwdriver.

    • Gently remove the top of the mouse.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Steven Kontra

Member since: 05/04/18

509 Reputation

0 comments