The Claw Battery Replacement

Written By: Alain Pierre
  • Comments: 1
The Claw Battery Replacement

Difficulty

Easy

Steps

4

Time Required

30 seconds - 1 minute

Introduction

This guide will teach you how to properly replace the batteries in your Claw Machine. If you are experiencing any power related issues with your device follows these steps.

  1. 4wodeeiaV6H2OlnX

    • Hold The Claw machine upright so that the controls are facing you.

  2. 6WBFVD4GsRFxaFnJ

    • Turn the device upside down keeping the controls facing in your direction.

  3. Y6IkDdF2BWheCMDb

    • Locate the battery compartment door on the bottom cover of The Claw.

    • Loosen the screw from the battery compartment door with your phillips head screwdriver.

  4. CWBF4pqOrR4yP5cT

    • Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.

    • If the batteries are not placed in the right configuration the device will not operate. make sure to identify positive and negative sides of the battery and follow the configuration on the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alain Pierre

Member since: 22/03/16

1188 Reputation

One comment

daiobn ht45o9iyjugggjvj nvj vnv jnkrfdoelcbigvfcofrbbvfgb4vg3rcf2edebb

Jennifer Mateo -