Introduction

Use this guide to replace the power button of your TC-WE825S cassette player.

  1. EhbT3Xo5BHnrbrhO
    EhbT3Xo5BHnrbrhO
    cGK4YO4UgZQPCs2v
    ogqSxBHRvpMjkiLJ
    • Unscrew the 8mm Phillips head screws from the left and right sides of the cassette player.

  2. Grb2Q3lATpCvLymf
    Grb2Q3lATpCvLymf
    lWGuZBRiJbaXbtNB
    oXSN4dAwdVqIiUjk
    • Unscrew the 8mm Phillips head screw from the back of the cassette panel. Remove the cover.

  3. dOQIsF32FAbIOYDv
    dOQIsF32FAbIOYDv
    rwpsFa1keKZJxJJP
    SKVxUDOuiDNsjWwC
    • Locate the power cord connection and disconnect it. To remove it, press down on the plastic tab and slowly slide it out of the socket.

  4. y6befAxHD3e5OjiC
    y6befAxHD3e5OjiC
    OWTqT3ajjqUgrmRU
    • Locate the cords that are connected to the power button. Remove the connection by tugging on the cords gently, releasing them from the main PC board.

  5. Q1RXpsOcfv5UPwUB
    • Unscrew all five 7.5mm Phillips head screws from the PCB (printed circuit board) behind the power switch.

  6. VBIffIIDCXuYT5V6
    • Use forceps to gently pry the PCB from the frame of the cassette player.

  7. RsBSbYiX2geGQGmk
    RsBSbYiX2geGQGmk
    4VDoflrSNDXAaPDO
    yf5lMD1JqPsxVtiT
    • Use a soldering iron to desolder the power switch’s terminals and connections. Remove the power switch, replace it, and solder it back together. Repeat these steps in reverse order to put the cassette player back together.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cameron

Member since: 01/06/16

108 Reputation

0 comments