Sylvania SDVD9004 CD Drive Replacement

Written By: Sarah Henry
  • Comments: 0
Sylvania SDVD9004 CD Drive Replacement

Difficulty

Moderate

Steps

3

Time Required

5 - 10 minutes

Introduction

This guide will provide steps on how to remove and replace a CD drive in this DVD player. It is important to have all tools ready and have completed prerequisite guides.

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete steps that deal with delicate internal components.

  1. 6UDYBcfkMtuxLmqr
    6UDYBcfkMtuxLmqr
    J4guFPKCUcKQBQM5
    tI1woOB3gqTJpwoN

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Wedge head lightly between drive and bottom of tab.

    • Repeat on both sides.

    • Gently pull out ribbon

  2. 2DrsEpkRQPBvfUL6

    • Drive Removal

    • Use Philip's screw driver to remove three 7 mm screws.

    • Rotate counter clockwise to loosen screws.

  3. PCQtB6mGGp5adPcb

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Follow the red and black cables to the motherboard point of attachment.

    • Use a Flat head screwdriver.

    • Place head of driver into the grove of plug and port.

    • Wedge on all sides evenly to work out plug slowly.

    • Remove small and large plugs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sarah Henry

Member since: 31/10/16

417 Reputation

0 comments