Introduction
All that is needed to replace the battery is a screwdriver.
Tools
-
-
Place the lamp LED side down on a clean workspace.
-
Remove the screws holding the casing together using a Phillips #1 Screwdriver.
-
-
-
Align the black wire of the new battery towards the center of the device.
-
Press down firmly on the clip to insure that it is properly connected.
-
-
-
Seat the battery in the orange component so that the short end of the battery pack is touching the foam bumper.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
8 comments
please help in finding the life p04 battery,3.2v ,1500 mah,batch #20309
as my solar lights battery is dead..iam unable to find out whr i will get a new one
where to get the battery spare part?