Summer 3D Lite Convenience Stroller Back Wheel Replacement

Written By: Nick Taylor
  • Comments: 5
Summer 3D Lite Convenience Stroller Back Wheel Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

Use this guide to replace your back wheel on your Summer Infant 3D Lite stroller.

  1. fUPTJNclfZRELK3e
    fUPTJNclfZRELK3e
    BrKRN3OFgw1OTVNP

    • Set the stroller up so the front wheel is on the ground with the metal push tab up.

  2. eSCPxUgYiodeWK1W
    eSCPxUgYiodeWK1W
    VMRTjDNCLd4kmHls

    • Push the tab in with your finger enough so the plastic can slip out above the tab.

  3. pceVMu2kUJfYYeNC

    • OPTIONAL: If the tab is being difficult, use a key to push the tab in further in order to slip plastic out of place.

    My tabs are stuck inside now I used the key and wheel isn't coming off

    ucantrock1 -

    Hi, same has happened with me. How did you resolve this issue?

    Jaswin Kaur -

    This tip has been very useful. Thank you! I used a screw driver instead of a key to push the tab down and it came out easily.

    Nithya Kalyani -

  4. nltxvgJAiAb4uCCv

    • The wheel should slide right off the pole once the tab is pushed out of place. It is now possible to make repairs or replace the wheel completely.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nick Taylor

Member since: 29/09/15

188 Reputation

2 comments

Gd, have a question . Were can u buy spare parts for this type of stroller?

pieterroos -

Can you tell me if you have a rear wheel that will fit a summer 3D go convenience stroller all black?

charles nelms -