Sublue WhiteShark Mix Underwater Scooter Lower Panel Replacement

Written By: Luke Johnson
  • Comments: 1
Sublue WhiteShark Mix Underwater Scooter Lower Panel Replacement

Difficulty

Moderate

Steps

9

Time Required

20 minutes

Introduction

This guide will teach you how to remove the main body panel to the underwater scooter.

  1. hWbKOQbDDG6lAbQR

    • Remove the black screw by rotating it counterclockwise.

  2. ffbrZuMbgCRFZifE

    • Hold the device in place and pull up on the floater.

  3. kcUfhRi26l2SlfIH

    • Remove the top floater.

  4. T3iMtnuPtqpYDSXx

    • Turn the device upside-down.

  5. JjJnH4djhLGEmILy

    • Press the push button in while sliding the planner towards the back of the device to remove the battery panel.

  6. lwBRGsyCfQlHUB1A

    • A push tab holds the battery in.

  7. ncKIGgLJ2AW55Dn1

    • Push the tab in and pull the battery outward to remove it.

  8. aNdtSFMyYvAWGdDK

    • Remove the ten Phillips screws on the bottom of the device. Remove the bottom panel.

  9. tisKUPZc4G2OCYNI

    • Pull the panel forward.

    • You may need to use pry tools to aid in separating the panels.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Luke Johnson

Member since: 01/11/23

391 Reputation

One comment

Is it possible to replace the electronics of the Sublue Watershark Mix?

Alenka Arambašić -